Mystim Tingly Timmy Electro Stimulant Silicone Dildo User Manual

1. Hyrje

The Mystim Tingly Timmy is a high-quality silicone electro-stimulant dildo designed for use with a compatible electrostimulation unit. It features a straight, wide design with a clitoral stimulator, allowing for gentle electrical impulses. The hollow handle ensures a secure grip during use.

2. Informacion mbi sigurinë

Please read and understand all safety instructions before using the Mystim Tingly Timmy. Improper use can lead to discomfort or injury.

• Përdorimi fillestar: Always begin with the lowest possible setting on your electrostimulation device and gradually increase the intensity to a comfortable level.
• Lubrifikimi: Use only water-based lubricants with this device. Do not use silicone-based oils or lubricants, as they can degrade the silicone material.
• Agjentët e pastrimit: Never use acid cleaners, alcohol, or harsh chemicals to clean the device. These substances can damage the material.
• Magazinimi: Store the device in a clean, dry, and dark place, preferably in a container, away from direct sunlight or strong light sources, which can cause material degradation.
• Kushtet mjekësore: Consult a healthcare professional before use if you have any medical conditions, especially those related to heart, circulation, or skin sensitivity.

3. Produkti i Mbaruarview

The Mystim Tingly Timmy is crafted from high-quality silicone, designed for comfort and effective electro-stimulation. It features specific conductive surfaces for optimal sensation.

Figure 1: The Mystim Tingly Timmy Electro Stimulant Silicone Dildo. This image shows the overall design of the black silicone dildo with its ergonomic shape and integrated handle.

Figure 2: Product dimensions. The image illustrates the length of the device as 27 cm and the diameter as 3.8 cm.

Figure 3: Conductive surfaces. This image highlights the areas on the device that are designed to transmit electrical impulses, shown in purple and green striped patterns.

4. Konfigurimi

To use the Mystim Tingly Timmy, you will need a compatible electrostimulation unit (not included).

1. Ensure your electrostimulation unit is turned off before connecting the device.
2. Locate the connector ports on the Mystim Tingly Timmy. These are designed for 2mm pin plugs.
3. Connect the electrode wires from your electrostimulation unit to the corresponding ports on the Tingly Timmy. Ensure a secure connection.

Figure 4: Connector ports. This image indicates the location of the 2mm pin connectors on the device, labeled as 'Buchsen / connectors', and shows compatible 2mm male plugs.

5. Udhëzimet e funksionimit

Once the device is connected to your electrostimulation unit, follow these steps for operation:

1. Ensure the Tingly Timmy is clean and dry before each use.
2. Apply a generous amount of water-based lubricant to the device and, if desired, to yourself.
3. Carefully insert the device. The hollow handle provides a good grip for positioning.
4. Turn on your electrostimulation unit and select a program. Start with the lowest intensity setting.
5. Gradually increase the intensity until you achieve a comfortable and pleasurable sensation. Do not exceed a comfortable level.
6. To discontinue use, turn off the electrostimulation unit before removing the device.

6. Mirëmbajtja dhe Pastrimi

Proper cleaning and maintenance are essential for hygiene and to prolong the life of your Mystim Tingly Timmy.

1. After each use, disconnect the device from the electrostimulation unit.
2. Wash the device thoroughly with mild, plain soap (without dyes or fragrances) and warm water.
3. Use a soft cloth, thoroughly wrung out, to wipe down the entire surface of the device.
4. Shpëlajeni tërësisht për të hequr të gjitha mbetjet e sapunit.
5. Towel dry the device completely before storing.
6. Store in a clean, dry, and dark place, such as a dedicated container, to protect it from light and dust.

7. Troubleshooting

If you encounter issues with your Mystim Tingly Timmy, consider the following:

• Pa ndjesi:
  • Ensure the electrostimulation unit is turned on and fully charged or has fresh batteries.
  • Check that all connections between the device and the electrostimulation unit are secure.
  • Verify that the intensity setting on your electrostimulation unit is not at zero.
  • Ensure sufficient water-based lubricant has been applied for good conductivity.
• Sensation Too Strong/Weak:
  • Adjust the intensity settings on your electrostimulation unit gradually until a comfortable level is reached.

8. Specifikimet

9. Garancia dhe Mbështetja

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Mystim customer service directly through their official webfaqe interneti. Ruajeni provën e blerjes për çdo kërkesë garancie.