SPS ASR-X23XX AsReader Dock-Type Combo Reader
AsReader DOCK-Type Combo
- Model Name: ASR-X23XX
- Project Name: DOCK-Type Combo Reader
- Document Number: SQP-0621-ASR-X23XX
- Revision: 0
Supplier Approval
| Made by | Checked by | Approved by |
| ybkim |
Customer Approval
| Checked by | Checked by | Approved by |
Smart Power Solutions, Inc.
| Products | AsReader Dock-Type Combo | Reversion | Rev.0 |
| Document No | SQP-0621-ASR-0230D-V4 | Released | 2022-10-18 |
| Created By | Youngbeom Kim | Revised By | |
| Page | 2/10 page | Revision Date |
Revision History
| Rev | ECN | Description | Approved by | Date |
| 0 | Initial draft | 2022.10.18 |
Overview
Introduction
Mobile AsReader Dock-Type Combo reader allow you to read RFID tags and scan 2D/1D Barcode. It can be used as a host device that supports BLE (Bluetooth Low Energy). It complies RFID standard (Air Protocol: EPC Gen2 V2 / ISO 18000-6C), Operation Frequency is 840MHz~960MHz. It uses Li-ion battery (1100mAh) as internal power. Also, it can charge reader’s battery by using Magconn cable or USB micro 5-pin cable.
Product Appearance
| Case Materials | PC (Poly Carbonate) |
| Charging | Magconn or micro 5-pin USB |
| Trigger TAGGING button | 2 EA |
Hardware Specifications
Main Feature
| Item | Description |
| Processor | |
| MCU | GigaDevice GD32F103RBT6, ARM Cortex-M3 |
| External Crytal | 8 MHz |
| Connectivity | |
| BLE | BLE supported host devices |
| USB-micro B | For charging |
| Magconn | Magconn magic cable for charging |
| Battery | |
| Capacity | Li-ion Battery 1100mAh |
| Others | |
| Physical buttons | 2 buttons |
| LED | 1 red LED, 4 white LEDs |
Barcode Module Specification
| Item | Description |
| Engine | Honeywell N6603 |
| Decoder | Honeywell Mini-DB |
| Sensor | Proprietary CMOS sensor with global shutter and 844 x 640 pixel resolution |
| Illumination | White LED |
| Aming | 650 nm high-visibility red laser (class 2 laser safety) |
| Motion Tolerance | Up to 584 cm ( 230˝ ) per second in total darkness with 100% UPC at 10 cm ( 4˝ )
distance |
| Field of View | Horizontal Field Angle: 42.4°
Vertical Field Angle: 33° |
| Scan Angles | Tilt: 360°, Pitch: ± 45, Skew: ± 60° |
| Symbol Contrast | 20% minimum reflectance |
| Symbologies | Linear: UPC/EAN/JAN, GS1 DataBar, Code 39, Code 128, Code 32, Code 93,
Codabar/NW7, Interleaved 2 of 5, Code 2 of 5, Matrix 2 of 5, MSI, Telepen, Trioptic, China Post 2D Stacked: PDF417, MicroPDF417, GS1 Composite |
| 2D Matrix: Aztec Code, Data Matrix, QR Code, Micro QR Code, MaxiCode, Han Xin Code Postal: Intelligent Mail Barcode, Postal-4i, Australian Post, British Post, Canadian Post, Japanese Post, Netherlands (KIX) Post, Postnet, Planet Code
OCR Option: OCR-A, OCR-B, E13B (MICR) |
RFID Module Specification
| Item | Description |
| RFID Reader Chip | PHYCHIPS PR9200 |
| Air Protocol | ISO 18000-6C / EPC Class1 Gen 2 |
| Part No. & Operating Frequency | 840 MHz ~ 960 MHz |
| RFID Read Distance | Up to 0.5m (depend on tags) |
| Antenna | Ceramics patch antenna |
| Tag | Read, Write, Lock, Kill |
Battery Pack
| Item | Description |
| Description | Rechargeable Lithium ion battery pack |
| Battery cell configuration | 1S1P (3.7V 1100mAh) |
| Model name | MBP-CY110S (MBP1S1P1100) |
| Charging Voltage | 4.2V |
| Discharging cut-off voltage | 2.75V |
| Charging Current | Standard 550mA Maximum 1.2A (25℃) Cut-off <55mA |
| Discharging Current | Standard 550mA Maximum 1.2 A (25℃) |
Charging
Device can be charged with Magconn cable or USB micro 5-pin.
Charging time: 2 hours
LED description
RED:
- Charging: Red LED On
- Fully charged: Red LED off
While:
- 4 LEDs for battery gauging
- 90%-100%: 4 LEDs on
- 70%-89%: 3 LEDs on, 1 LEDs toggle
- 50%-69%: 2 LEDs on, 1 LEDs toggle
- 30%-59%: 1 LEDs on, 1 LEDs toggle
- 10%-29%: 1 LEDs toggle
- 0%-10%: All LEDs off
Environmental Requirements
Temperature Operation
- Discharge: -10 to 45°C
- Charge: 0 to 40C
Storage (for shipping)
- 20 to 60°C: 1 month
- 20 to 45°C: 3 month
- 20 to 20°C: 1 year
IP ratings
TBD
Mechanical Specifications
Dimensions
117.6 x 64.1 x 24.8 m
Weight
Under 109.8g
Certification and Safety Approvals FCC Compliance Statement
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antennae
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
Industry Canada(IC) Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Contains transmitter module IC: MBN52832 (FCC ID: HSW2832 / IC: 4492A-2832)
Documents / Resources
 | SPS ASR-X23XX AsReader Dock-Type Combo Reader [pdf] User Manual 2AJXE-ASR-X23XX, 2AJXEASRX23XX, ASR-X23XX AsReader Dock-Type Combo Reader, ASR-X23XX, AsReader Dock-Type Combo Reader, Dock-Type Combo Reader, Combo Reader, Reader |