SPRINGS WINDOW FASHIONS Roller Shade
Specifications
- Mounting Options: Inside Mount, Outside Mount, Fascia Mount
- Control Options: Continuous Cord Loop, Cordless/SmartPull, Motorized
Product Usage Instructions
- Inside-Mount Continuous-Loop Roller/Solar Shade Installation:
- Ensure you have all the necessary components: Valance (if ordered), Continuous-loop shade, Idle bracket, Clutch bracket, Chain guide, Hold-down brackets and pins (if ordered), Shade and cassette valance, Cassette brackets.
- Hold the shade in the desired location and mark the center of each end with a minimum clearance of 1/4″ above the shade.
- Place the brackets based on the marks made in step 2, ensuring they are level and equidistant from the window. Mark screw locations.
- Drill holes and mount the brackets by positioning them, starting screws, and tightening them securely.
- Mark the valance on top of the window frame by measuring 6″ from each end and spacing holes for additional screws equally.
- Measure the shade from the center to fabric edge and clutch edge to determine the maximum shade clearance needed. Position the valance ensuring proper clearance from the bracket front.
- Mount the shade in the brackets securely.
FAQs
- Q: What should I do if I need additional support during installation?
- A: If you require additional assistance during installation, please contact our Customer Service Center at 1-800-221-6352 or email us at windowfashions@springswindowfashions.com for guidance and support.
“`
Documents / Resources
 |
SPRINGS WINDOW FASHIONS Roller Shade [pdf] Installation Guide Continuous Cord Loop Inside Mount, Continuous Cord Loop Outside Mount, Continuous Cordless Fascia Mount, Cordless - SmartPull Inside Mount, Cordless - SmartPull Outside Mount, Motorized Control Mount, Roller Shade, Roller, Shade |