Spraying System B811 Manual Brush Headers
REDUCE MAINTENANCE AND CLOGGING WITH MANUAL BRUSH HEADERS
The Manual Brush Header is designed with a handwheel at the end of the header. Turning the handwheel during the cleaning cycle rotates the interior brush assembly to scrub debris from the interior wall of the header as well as each nozzle orifice. Manual Brush Headers are a cost-effective and reliable way to keep your nozzles clean. In a few seconds, debris is swept away through the drain valve, restoring full liquid flow to the system. The internal brush, shaft, flange, and bolt connections are made from 316l stainless steel.
We also manufacture plastic versions made from corrosion-resistant materials. Resistant materials for caustic environments. Ask about the Automatic Brush Header, which maximises uptime as operator intervention is eliminated. Our spray experts can help analyse your operation and choose the products that best fit your application.
FEATURES
- All headers are built-to-order, designed and fabricated
- According to production specifications
- Efficiently clear header nozzles of debris in less than one minute
- Recommended for use with most hydraulic nozzles
- Internal cleaning with brush rotation and axial movement
SPECIFICATIONS
| Maximum operating pressure: 800 psi (55 bar) |
| Standard pipe size: 1.5 in. to 6 in. |
| Maximum pipe length: 42 ft (12.8 m) |
| Flow rate: 65 gpm to 1035 gpm (246 lpm to 3918 lpm) |
| Maximum liquid temperature: 100°F (38°C) |
| Material: Nozzle and pipe are 316l stainless steel |
| Inlet connection: NPT, BSPT, flanged, others available |
IDEAL FOR
- Pickling Line
- Rinse Line
- Painting Line
- Galvanising Line
To obtain a no-obligation quotation on our Manual Brush Header, please review the following information and give us a call to discuss your application.
SHOWER INFORMATION
- Pipe length (PL)*: ___________________
- Theoretical coverage (TC)*: ___________
- Nozzle spacing (NS): ________________
- Inlet to nozzle (IL)*: __________________
- First to last (FL): ____________________
- EEnd-to-end(ED): ___________________
- Shower height (SH)*: ________________
- Support distance (SD)*:_______________
- Spray angle (SA)*:___________________
- (0, 15, 30, 45, 60, 75)
- Outlet angle (OA)*: __________________
- Pipe material*:______ (316LSS or 304LSS)
- Inlet (M)*: _____________ (NPT or BSPT)
- Operating pressure*:_________________ (psi or bar)
- Total flow*: ________________________ (gpm or lpm)
- Operating temperature*: ______________ (F or C)
- Qty. of nozzles:______________________
- Handwheel: ________________________ (Aluminium SS)
- Ratchet handle: _____________________
- (optional, iron material)
- Oscillating stroke length*: _____________ (in. or mm)
- Spray overlap: ______________________
- (single or double)
- Liquid sprayed: _____________________
- Require
To learn more about our steel applications online, visit
https://www.spray.com/applications/washing-pickling-and-rinsing.
| Defaults | Minimums |
| Material: 316lss | IL: 4 in. (101.6 mm) |
| psi: 40 (2.76 bar) | psi: 40 (2.76 bar) |
| IL: 4 in. (101.6 mm) | Pipe size: 1 -1/2 in. |
| SA: 60 | NS: 2 in. (50.8 mm) |
| OA: 0 (zero) | |
| Handwheel (Alum) | |
| Inlet: (M) NPT | |
| Spray overlap: 1 | |
| Temp: 100°F (38°C) |
North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
www.spray.com
VIEW ONLINE
Bulletin No. 811 Spraying Systems Co. 2025
Documents / Resources
 |
Spraying System B811 Manual Brush Headers [pdf] Owner's Manual B811 Manual Brush Headers, B811, Manual Brush Headers, Brush Headers, Headers |