WL6376B WiFi Plus BT Module
“
Product Specification
Model: WL00033
Standard:
IEEE802.11a/b/g/n/ac/2T/2R+Bluetooth/V2.1/4.2/5.1
USB: USB2.0 Module (MT7663BUN)
Specifications
- Board Model: WL00033
- Certification Type: FCC, IC
- Operating Voltage: Varies
- Antenna Type: Wi-Fi Steel antenna & BT
External Antenna - Operating Systems: Windows, Linux,
Android - Security: 64/128-bits WEP, WPA, WPA2/WPA3
Electrical and Thermal Characteristics
Temperature Limit Ratings:
| Parameter | Minimum (°C) | Maximum (°C) |
|---|---|---|
| Storage Temperature | -40 | +80 |
| Ambient Operating Temperature | 0 | 70 |
| Junction Temperature | 0 | 125 |
Frequently Asked Questions (FAQ)
Q: What is the default security setting for the product?
A: The default security setting for the product is 64/128-bits
WEP. You can change this in the driver settings if needed.
Q: Can the product be used with both Windows and Android
devices?
A: Yes, the product is compatible with Windows, Linux, and
Android operating systems.
“`
Product specification
WL00033
IEEE802.11a/b/g/n/ac/2T/2R+Bluetooth/V2.1/4.2/5.1 USB2.0 Module
(MT7663BUN)
board model
Certification type
WL00033 WL00033
FCC
2BBLK-WL6376B
IC
303702792-9W-LW6L367367B6B
WL00033
SRRC
ISSUED BY
CHECKED BY
APPROVED BY
CUSTOMER APPROVAL
CUSTOMER COMMENT:
APPROVED BY:
Huizhou Speed Wireless Technology Co., Ltd
Huizhou Speed Wireless Technology Co.,Ltd.
Address: No.138 Huize Road, Hi-Tech Industrial Park of East River, Zhongkai Hi-
tech District, Huizhou City, Guangdong Province, China
1 / 15
Version 1.2
Product specification
WL00033
release version Version 1.0
Version 1.1
Version 1.2
Document revision history
Date
implementer
Remarks
2023-08-09 2023-09-03 2023-11-03
First edition release Update product labels Update product pictures
2 / 15
Version 1.2
Product specification
WL00033
1. General Description
This document is to specify the product requirements for 802.11a/b/g/n/ac and BT combo module. This module based on MediaTek MT7663BUN chipset that complied with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n standard from 2.4~2.5GHz and IEEE 802.11a, IEEE 802.11ac , IEEE 802.11n standard from 5.15GHz ~ 5.85GHz , and it can be used to provide up to 11Mbps for IEEE 802.11b, 54Mbps for IEEE 802.11g, 300Mbps for 802.11n, 866.7Mbps for 802.11ac to connect your wireless LAN.The Bluetooth part supports latest 5.0+HS operation.
2. Features
Compatible with IEEE 802.11a standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate. Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps data rate. Support 20MHz, 40MHz bandwidth in 2.4GHz band Support 20MHz, 40MHz, 80MHz bandwidth in 5GHz band Support MU-MIMO RX Support STBC, LDPC, TX Beamformer and RX Beamformer Greenfield, mixed mode, legacy modes support IEEE 802.11 d/e/h/i/j/k/mc/r/v/w support Security support for WFA WPA/WPA2/WPA3 personal, WPS2.0, WAPI QoS support of WFA WMM, WMM PS Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations Bluetooth specification 2.1+EDR Bluetooth 4.2 Low Energy (LE) Bluetooth 5.1 High speed USB 2.0 interface RoHS compliant
3 / 15
Version 1.2
Product specification
3. Electrical and Thermal Characteristics
WL00033
3.1 Temperature Limit Ratings
Parameter Storage Temperature Ambient Operating Temperature Junction Temperature
Minimum -40 0 0
Maximum +80 70 125
Units C C C
3.2 General Section
4.2.1
Feature Antenna Type
Detailed Description WIFI&BT: Wi-Fi Steel antenna&BT External Antenna
4.2.2 4.2.3
4.2.4
Operating Voltage
Current Consumption
Form Factor and Interface
3.3V±10% 300mA@RX 1000mA@TX High Speed USB2.0
Interface
4. Software
4.1 DRIVER Information
Driver
Windows, Linux, Android
Security
64/128-bits WEP, WPA, WPA2WPA3
4.2 EEPROM BT
Vendor ID Product ID
WiFi
Reg Domain
Vendor ID Product ID
Information
default default
Worldwide 2.4G/5G Read from registryControl by driver
—- default default
4 / 15
Version 1.2
Product specification
4.3 DC Characteristics
Symbol
Parameter
Min
TYPE
VIL
Input Low Voltage
-0.3
VIH
Input High Voltage
3.0
WL00033
Max
Unit
0.825
V
3.6
V
5. Mechanical Characteristics
5.1 Mechanical Requirements
#
6.1.1
6.1.2
6.1.3
Feature Length
Width
Height
Detailed Description 30 mm
25mm
1.0 mm(PCB) MAX6.1 mm
5.2 Mechanical Dimensions BOTTOM
5 / 15
Version 1.2
Product specification
Size error range
DIM (MM)
0-5 5-10 10-50 >50
Tolerance (MM)
±0.15 ±0.20 ±0.30 ±0.40
5.3 Pin Description
Pin Symbol
description
I
1 GND
Ground
/-
2 USB_DP 3 USB_DM
USB Data+ USB Data-
O/I OI
4 VCC_3.3V
3.3v source
/I
5 RESET
(Inside there is a
O/
10K
O
pull-up resistor, low level effective)
(Inside there is
O
6 WL_HOST_W AKE
a 10K pull-up resistor,
low level
effective)
7 GND
Ground
–
8 NC
NC
–
(Inside there is a
O
9 BT_HOST_WA
10K pull-up
KE
resistor, low
level effective)
10 GND
Ground
–
11 GND
Ground
–
12 BT_ANT
BT_ANT
–
13 GND
Ground
–
WL00033
6 / 15
Version 1.2
Product specification
WL00033
order name of material numb er1 PCB
2 SMD Steel antenna 3 Shield cover 4 WIFI+BT IC 5 diplexer 6 crystal 7 resistance 8 capacitance 9 inductance
Manufacturer brand
Xing Hai Rong/Ke Xiang Xin tian he
Xin tian he MTK
Walsin/ACX LUCKI
Walsin/Yageo/ROYALOHM/FH/ TA-I Murata/Walsin/Yageo/SAMSUNG
Murata/FH/Sunlord
5.3.1 USB interface electrical characteristics
NoteUSB D+/D-Differential line impedance control of 90 OHM;C68, C69 please design reservation, default,Adjust according to the actual situation
5.4 Physical map
Top
Bottom
7 / 15
Version 1.2
Product specification
6. Power on sequence timing & Reset
WL00033
7. Environmental Requirements and Specifications TP Content 7.1 PCB Bending
The PCB bending spec shall be keep planeness under 0.1mm for both NATER and end assembly customer.
7.2 ESD
Symbol
Ratings
Max
Unit
(HBM)
Electrostatic discharge voltage (human body model)
2000
V
(CDM)
Electrostatic discharge voltage (charge device model)
500
Please handle it under ESD protection environment.
7.3 Terminals
The product is mounted with motherboard through half hole. In order to prevent poor soldering, please do not touch the pad by hand.
7.4 Falling
It will cause damage on the mounted components when the product is falling or receiving drop shock. It may cause the product mal-function
8 / 15
Version 1.2
Product specification
7.5 Storage Condition
5.1 Moisture barrier bag must be stored under 30 degree C, humidity under 85% RH. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date.
5.2 Humidity indicator cards must be blue, <30%
7.6 Baking Condition
Products require baking before mounting if a)humidity indicator cards reads >30% b) temp <30 degree C, humidity < 70% RH, over 96 hours Baking condition: 90 degree C, 12-24 hours Baking times: 1 time
WL00033
9 / 15
Version 1.2
Product specification
8. Soldering and reflow condition
WL00033
Follow the solder paste composition to set the reflow profile Lead free solder paste(SAC305, SAC387 or SAC405) reflow profile setting as above :
Ramp up rate (to Peak temp) : < 1.2’c/sec, typically Time above Liquidus(217’C) : 60~90Sec Peak Temp : 245+0/-5’C Ramp-down rate (Peak to RT) : 1~3’C/sec, typically
10 / 15
Version 1.2
Product specification
WL00033
8.1 Wireless module before the SMT note:
9.1.1. When customers Open stencil must be sure the hole bigger to the Wireless module plate, please press 1 to 1 and 0.7 mm is widened to open outward, the thickness of 0.12 mm.
9.1.2. Can’t get the wifi module bare hands when needs, must we wear the gloves and static ring.
9.1.3. The furnace temperature according to the size of the customer the mainboard, generally like to stick on a tablet standard temperature of 250±5, can do 260±5.
Storage and use Wifi module control should pay attention to the following matters: ·Module of the storage life of vacuum packaging
1-1. Storage life12 months. Storage conditions:<40. Relative humidity :< 90%R.H.
1-2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing must be:
1-3. Check the humidity card : stored at20%RH.If: 30%~40 %( pink) or greater than 40 %( red).Labeling module has moisture absorption.
Factory environment temperature humidity control: t30%60%R.H. Once openedthe workshop the preservation of life for 168 hours.
1-4. If baking is required, devices may be baked for:
Modules must be to remove module moisture problem. Baking temperature: 125 , 8 hours. After baking, put proper amount of desiccant to seal packages.
1-5. the actual number of module vacuum packing which is based on the actual number of packages to the customer requirements
2.Module reel packaging items as follows. 2-1. Storage life12 months. Storage conditions:<40. Relative humidity :< 90%R.H.
2-2.Module apart packing after 168 hoursTo launch patch need to bake, to remove the module hygroscopic, baking temperature conditions1258hours.
2-3. the actual number of module reel packing which is based on the actual number of packages to the customer requirements
3.Module pallet packaging items as follows 3-1. Storage life3 months. Storage conditions:<40. Relative humidity :< 90%R.H.
3-2. Module if not used within 48 hours, before launch the need for baking, baking temperature: 125, 8 hours.
3-3. The actual number of module pallet packing which is based on the actual number of packages to the customer requirements.
11 / 15
Version 1.2
Product specification
WL00033
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01:
2.2 List of applicable FCC rules
CFR 47 FCC PART 15 SUBPART C and 15 SUBPART E have been investigated. It is applicable to the modular.
2.3 Specific operational use conditions
This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system.
12 / 15
Version 1.2
Product specification
WL00033
2.4 Limited module procedures
Not applicable.
2.5 Trace antenna designs
Not applicable.
2.6 RF exposure considerations
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm from your body. If used in any other way, such as portable or with other transmitters simultaneously, requires additional evaluation, testing, or testing and Class 2 permissive change.
2.7 Antennas
The Wi-Fi antennas were integrated on the module, the antenna gain is 2.16dBi/1.23dBi for 2.4GHz band, 3.57dBi/4.74dBi for 5GHz band.
The Bluetooth antenna is a FPC antenna with I-PEX connector, the antenna gain is 5.85dBi.
2.8 Label and compliance information
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2BBLK-WL6376B” 2.9 Information on test modes and additional testing requirements Host manufacturer is strongly recommended to confirm compliance with FCC requirements for the transmitter when the module is installed in the host. 2.10 Additional testing, Part 15 Subpart B disclaimer Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15B.
13 / 15
Version 1.2
Product specification
WL00033
ISED Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicablesaux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 5250-5350MHz for indoor use only. 5250-5350MHz pour une utilisation en intérieur uniquement.
The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
This radio transmitter [IC: 30729-WL6376B] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Le présent émetteur radio [IC: 30729-WL6376B] a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d’antenne énumérés ci- dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l’exploitation de l’émetteur.
Antenna Bluetooth Antenna
Antenna type FPC
WiFi Antenna 1
Integral
WiFi Antenna 2
Integral
Antenna gain 5.85dBi 2.16dBi 3.57dBi 1.23dBi 4.74dBi
Frequency Range 2.4-2.5GHz 2.4-2.5GHz
5.15-5.85GHz 2.4-2.5GHz
5.15-5.85GHz
Input impedance 50 50
50
14 / 15
Version 1.2
Product specification
WL00033
ISED Radio Frequency Exposure Statement:
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body
L’appareil est conforme aux limites d’exposition aux rayonnements spécifiées par la pour les environnements non contrôlés. La distance entre le radiateur et le corps doit être d’au moins 20 cm lors de l’installation et du fonctionnement de l’appareil.
ISED Label Instructions:
The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transmitter Module IC: 30729-WL6376B”,or “Contains IC: 30729WL6376B”, any similar wording that expresses the same meaning may be used.
L’extérieur des produits finis contenant ce module doit afficher une étiquette faisant référence au module inclus. Cette étiquette extérieure peut utiliser des libellés tels que: “contient le module émetteur IC: 30729-WL6376B” ou “contient: 30729-WL6376B”, tout libellé similaire exprimant le même sens peut être utilize.
15 / 15
Version 1.2
Documents / Resources
 |
SPEED WL6376B WiFi Plus BT Module [pdf] User Manual WL6376B, 2BBLK-WL6376B, 2BBLKWL6376B, WL6376B WiFi Plus BT Module, WL6376B, WiFi Plus BT Module, Plus BT Module, BT Module, Module |