SPECTRA 90990139 Revision S StorCycle Solution
Legal Notices
Copyright
Copyright © 2019 – 2023 Spectra Logic Corporation. All rights reserved. This item and the information contained herein are the property of Spectra Logic Corporation.
Notices
Except as expressly stated herein, Spectra Logic Corporation makes its products and associated documentation on an “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, BOTH OF WHICH ARE EXPRESSLY DISCLAIMED. In no event shall Spectra Logic be liable for any loss of profits, loss of business, loss of use or data, interruption of business, or for indirect, special, incidental or consequential damages of any kind, even if Spectra Logic has been advised of the possibility of such damages arising from any defect or error.
Information furnished in this manual is believed to be accurate and reliable. However, no responsibility is assumed by Spectra Logic for its use. Due to continuing research and development, Spectra Logic may revise this publication from time to time without notice, and reserves the right to change any product specification at any time without notice.
Trademarks
Attack Hardened, BlackPearl, BlueScale, Rio Broker, Spectra, SpectraGuard, Spectra Logic, Spectra Vail, StorCycle, TeraPack, TFinity, and TranScale are registered trademarks of Spectra Logic Corporation. All rights reserved worldwide. All other trademarks and registered trademarks are the property of their respective owners.
Part Number
90990139 Revision S
Revision History
| Revision | Date | Description |
| J | October 2021 | Updated for StorCycle 3.6.0. |
| K | April 2022 | Updated for StorCycle 3.6.1. |
| L | July 2022 | Updated for StorCycle 3.6.2. |
| M | August 2022 | Updated for StorCycle 3.7.0. |
| N | October 2022 | Updated for StorCycle 3.7.1. |
| O | April 2023 | Updated for StorCycle 4.0.0. |
| P | May 2023 | Updated for StorCycle 4.0.1. |
| Q | July 2023 | Updated for StorCycle 4.0.2. |
| R | November 2023 | Updated for StorCycle 4.1.0. |
| S | December 2023 | Updated for StorCycle 4.1.1. |
Note:
To make sure you have the release notes for the most current version of the StorCycle Release Notes, check the Spectra Logic Technical Support portal at support.spectralogic.com/documentation/release-notes/. You must sign into the portal before viewing Release Notes.
Contacting Spectra Logic
| To Obtain General Information | |
| Spectra Logic Website: spectralogic.com | |
| United States Headquarters | European Office |
| Spectra Logic Corporation 6285 Lookout Road
Boulder, CO 80301 USA Phone: 1.800.833.1132 or 1.303.449.6400 International: 1.303.449.6400 |
Spectra Logic Europe Ltd. 329 Doncastle Road Bracknell
Berks, RG12 8PE United Kingdom Phone: 44 (0) 870.112.2150 |
| Spectra Logic Technical Support | |
| Technical Support Portal: support.spectralogic.com | |
| United States and Canada Phone: Toll free US and Canada: 1.800.227.4637 International: 1.303.449.0160 |
Europe, Middle East, Africa Phone: 44 (0) 870.112.2185 Deutsch Sprechende Kunden Phone: 49 (0) 6028.9796.507 Email: spectralogic@stortrec.de |
| Mexico, Central and South America, Asia, Australia, and New Zealand Phone: 1.303.449.0160 |
|
| Spectra Logic Sales | |
| Website: shop.spectralogic.com | |
| United States and Canada Phone: 1.800.833.1132 or 1.303.449.6400 Email: sales@spectralogic.com |
Europe Phone: 44 (0) 870.112.2150 Email: eurosales@spectralogic.com |
| To Obtain Documentation | |
| Spectra Logic Website: support.spectralogic.com/documentation | |
Helpful Information
These release notes give you the latest information available about the Spectra® StorCycle® application.
Intended Audience
This guide is intended for data center administrators and operators who maintain and operate file storage systems. The information in this guide assumes a familiarity with computing terminology. You also need to be familiar with installing, configuring, and using data file storage and archival software.
User Interface Screens
The user interface changes as new features are added or other modifications are made between software revisions. Therefore, the screens you see in the user interface may differ from those shown in this guide.
Typographical Conventions
This document uses the following conventions to highlight important information:
WARNING Read text marked by the “Warning” symbol for information you must know to avoid personal injury.
CAUTION Read text marked by the “Caution” symbol for information you must know to avoid losing data.
IMPORTANT Read text marked by the “Important” symbol for information that helps you complete a procedure or avoid extra steps.
Note: Read text marked with “Note” for additional information or suggestions about the current topic.
The latest revision of the following documents related to the Spectra Spectra StorCycle Solution are available as PDF files on the Spectra Logic website at: support.spectralogic.com/documentations/user-guides.
- The Spectra StorCycle Solution Getting Started Guide provides a quick reference for installing and configuring the Spectra StorCycle solution.
- The Spectra StorCycle Solution User Guide provides detailed information about installing, configuring, and using the Spectra StorCycle solution. The content of this guide, for your revision of the StorCycle solution, is accessible by clicking Help
in the toolbar of the software.
The following document is available after logging into your Support portal account at: support.spectralogic.com. - The Spectra StorCycle Solution Release Notes and Documentation Updates provide the most upto-date information about the solution, including information about the latest software releases and documentation updates.
For additional information about the Spectra BlackPearl® Nearline gateway and the Spectra BlackPearl NAS solution, refer to the publications listed in this section. - The Spectra BlackPearl Nearline Gateway User Guide provides detailed information about configuring, using, and maintaining your BlackPearl system.
- The Spectra S3 API Reference provides information on understanding and using the Spectra S3 API.
- The Spectra BlackPearl Eon Browser User Guide provides installation and usage information for the Black Pearl Eon Browser.
- The Spectra BlackPearl NAS Solution User Guide provides information about configuring, using and maintaining your BlackPearl NAS solution.
The following documents are available after logging into your Support portal account at: support.spectralogic.com. - The Spectra BlackPearl Release Notes and Documentation Updates provide the most up-to-date information about the Black Pearl and Black Pearl NAS systems, including information about the latest software releases and documentation updates.
API Documentation
To access the documentation for the REST API, after StorCycle is installed, go to https://localhost/apidocs/.
For additional API documentation and examples, go to https://github.com/SpectraLogic/storcycle_api/.
User Feedback
Contact us at 800-833-1132 to give us suggestions or feedback on our products and documentation.
StorCycle Solution Updates
This section provides an overview of the features and changes for each released software version.
Package History
The following sections list the released Spectra StorCycle Solution update packages, and provide information about new features and updates that affect the application and its components.
StorCycle 4.1.1
IMPORTANT
You can only upgrade to StorCycle 4.1.x from StorCycle 4.0.x. If you are upgrading from a different version of the StorCycle solution, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release removes user interface support for deleting a storage location.
| Feature | Description |
| Storage Location Deletion Button | Removed the user interface option to delete a storage location. To delete a storage location, please contact Spectra Logic Technical Support at support.spectralogic.com. |
Known Issues
| Issue | Workaround |
| When restoring breadcrumbs using the Browse feature, the StorCycle solution fails to apply any specified filters. | Add all desired files to a restore list then initiate a restore from the list. |
StorCycle 4.1.0
IMPORTANT
You can only upgrade to StorCycle 4.1.x from StorCycle 4.0.x. If you are upgrading from a different version of the StorCycle solution, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release adds search filters, a new Browse Objects page, delayed source removal for migrated files, storage location deletion, and other new features listed in the table below.
| Feature | Description |
| Search Improvements | The browse feature allows users to select a source location and add filters like file name, project name, tag, free text, archive date, and within path separators to further narrow search results. These improvements are also supported on the Migrate / Store, Restore, Scan, Jobs, Reports – Catalogs, Delete Files, Database Backup Jobs, Storage, Departments, and User pages. |
| Browse Objects | Users can now search through multiple sources or projects for archived files and data and initiate a restore project for all objects selected on the new Browse Objects page. |
| Delayed Source Removal | During creation, Migrate / Store operations have a new Delayed Source Removal option. Delayed Source Removal allows users to archive data from a source without removing the source data until the specified time. |
| Storage Location Deletion | Users may delete storage locations that have been used in a job. |
| Improved UI and Error Messaging | Improved the consistency and quality of the wording used in the user interface and error messaging. |
| Preserve Permissions on Storage Locations | Administrator users can configure storage locations to keep or remove file permissions after a restore. |
Resolved Issues
| Issue | Resolution |
| Creating a storage location fails when running an archive job simultaneously. | This issue no longer occurs. |
| Archiving a scanned file from a versioned source fails if the file is no longer present on the source. | This issue no longer occurs. |
| Non-administrator users could access log endpoints in the StorCycle user interface. | The user interface now locks log endpoints from non-administrator users. |
| Restoring files from a BlackPearl system with packing enabled and large data sizes causes the restore to hang. | This issue no longer occurs. |
| Testing a new Spectra NAS storage location would fail unless the user included a management port. | Test Location now works with only an IP address. |
| The StartJob() command did not take interrupted or resumed jobs into account, preventing the jobs from completing or from being canceled. | Interrupted or resumed jobs now complete correctly and can be canceled. |
| The Post Action Pending indicator on the Migrate / Store page could incorrectly hide error indicators. | Warning and Error indicators now override the Post Action Pending indicator. |
| Attempting to restore retention-deleted files using the API returned an unclear error message. | A new error message displays. |
| Updating the MongoDB configuration file failed to account for the native system OS resulting in long run times. | StorCycle now possesses platform specific files for updating the MongoDB configuration file for Windows and Linux systems. |
| Job cancellation would occasionally hang indefinitely. | This issue no longer occurs. |
| Migrating a large amount of files to a Microsoft Azure environment fails. | This issue no longer occurs. |
Known Issues
| Issue | Workaround |
| Retrieving object files with names containing the character ‘\’ on a Linux system will fail. | Rename the file and do not include ‘\’ in the file name. |
StorCycle 4.0.2
Resolved Issues
| Issue | Resolution |
| When archiving a large number of small versioned files, the system experiences slower performance. | Improved archiving performance. |
StorCycle 4.0.1
Resolved Issues
| Issue | Resolution |
| When archiving versioned files with packing enabled, the system creates small packs of less than the expected 10,000 files per pack because the filtering of versioned objects occurs after the files are packed. | The filtering of versioned files now occurs before the files are packed, and pack files now contain 10,000 files per pack. |
| Archive jobs to storage targets fail when metadata files exceed the metadata size threshold of the storage target. | Metadata files that exceed the size threshold are skipped and the job continues normally. |
| When modifying the domain search query for user restrictions, administrators are unable to filter on designated names or designated groups. | Users can now modify the search query to search or restrict designated names or groups. |
StorCycle 4.0.0
IMPORTANT
You can only upgrade to StorCycle 4.0.0 from StorCycle 3.7.1 or StorCycle 3.7.0. If you are upgrading from a different version of the StorCycle solution, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release changes the licensing structure and improves file discovery behavior, data protection, useability, and adds the new features listed in the table below.
| Feature | Description |
| Require Database Backups | The StorCycle solution requires daily database backups to be configured for any migrate / store job to complete without warning. If no database backup is scheduled, the StorCycle solution notifies the user to create a daily database backup before executing the job. |
| Post Archive Deletion Delay | The StorCycle solution requires two successful database backups to complete before removing or replacing source files for applicable migrate / store jobs. |
| Retention Policy / Scheduled Delete | Previously only available to higher level licenses or as an upgrade, StorCycle
4.0.0 unlocks this feature for all license levels. Retention policies configured on target storage locations delete migrated data after a user defined retention period. |
| Project Restore | Browse an entire project during a restore. Enables the following new actions:
|
| Hash Type Selection | The StorCycle solution calculates a checksum hash on every file during scan, migrate, and restore operations. Available hashes include default and cryptographic.
Hash type selection is a global setting and applies to all jobs and files migrated after the setting is changed. The StorCycle solution uses the hash type first associated with a file even if current hash type setting differs. |
| Installation on a Customer Defined Share | The StorCycle database supports installation on a user defined local share. Windows installations no longer require the database to be installed on C:\ProgramData. Linux installations support any local share selection.
To move the existing database to a new local share, follow these steps:
Note: Spectra Logic recommends contacting support for help with migrating your database. |
| Time Stamps on Packs | ZIP and TAR packs sent to a BlackPearl system include a time stamp and the end of the file name, allowing users to easily identify packs created by the StorCycle solution outside of the management software. |
| Help Menu | Added a Help menu to the StorCycle dashboard. The Help menu provides links to the StorCycle user guide, StorCycle release notes, and Spectra Support Portal. |
| Encryption Key Management | Administrators can now save the encryption password to a local file, removing the requirement on Crypto Officer users to re-enter the encryption password after every reboot. |
| Configuration Information in Logs | Logs now include feature configuration information such as storage location, users, and licenses. |
| Geo Network Tool | StorCycle installations include the Spectra Logic Geo Network tool as a separate executable. |
| Google Cloud Platform | The Google Cloud Platform is supported as both a source and target through the standard S3 location endpoint. |
| AWS Native Glacier Deprecation | The StorCycle solution no longer supports AWS Glacier as a native target storage location. Users who require AWS Glacier must use a standard AWS S3 storage class bucket policy to move data to and from the S3 bucket. |
Resolved Issues
| Feature | Description |
| Re-Use Project Name / Delete Files | Starting with StorCycle 4.0.0, previously deleted project names are available as names for new projects. |
| Out of Memory When Scanning Many Objects | Resolved an out of memory error when scanning millions of objects with complex nested directories. |
| Histogram Rollup | Fixed an issue scanning histogram charts inside complex data structures. |
Known Issues
| Feature | Description |
| Linux Read-Only File Systems | Linux Read-Only file systems cannot be configured in the StorCycle user interface using existing configuration instructions. Configure Linux directories as storage locations in the StorCycle interface before mounting a read-only share to the directory. |
| Storage Location Deletion | Storage locations previously used in a project cannot be deleted. |
StorCycle 3.7.1
IMPORTANT
You can only upgrade to StorCycle 3.7.1 from StorCycle 3.7.0 or StorCycle 3.6.2. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release improves file restoration behavior and adds new features listed in the table below.
| Feature | Description |
| File Restoration Queue | When restoring multiple files to the same working directory, the StorCycle library now places subsequent files in a queue. |
| Sync and Batch Retry | When encountering a sync or batch error, the process now retries. |
| Windows Server 2019 | Support for Windows Server 2019. |
| Red Hat Enterprise Linux | Support for Red Hat Enterprise Linux version 8. |
StorCycle 3.7.0
IMPORTANT
You can only upgrade to StorCycle 3.7.0 from StorCycle 3.6.1, StorCycle 3.6.0, or StorCycle 3.5.0. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
IMPORTANT
If you have a Spectra NAS or BlackPearl storage location that is running BlackPearl 5.4.2 or later, the StorCycle solution must be configured to connect to the storage location using a user with Monitor and Login access, and not Administrator access.
Enhancements
This release improves the user interface and error messages, and adds the new features listed in the table below.
| Feature | Description |
| Versioning | When enabled, multiple versions of a file from the source storage location are kept on the target storage location after multiple migrate / store jobs. Each file name has a code appended to the file name that indicates the date and time that the file was migrated / stored. |
| Storage Location Security | To add storage location security to a new or existing source storage location, an administrator can assign an AD / LDAP group to the source storage location which restricts access to scan, migrate / store, and restore jobs, as well as file listings associated with the source, to members of the designated group and administrators. |
| Snapshots on Existing Spectra NAS Storage Locations | Existing BlackPearl NAS storage locations which have been used in a job can have snapshots enabled and will begin taking snapshots with the next migrate / store job. |
| Windows Installer | The Windows installer is updated to allow the creation of a service account during program installation, list the installation location of the MongoDB, and improve post-installation navigation. |
Resolved Issues
| Issue | Resolution |
| If a Delete Project job fails, for example, because a job using an overlapping storage location is already in progress, then it cannot be run a second time even when the reason for the original failure is resolved. | This issue no longer occurs. |
| No notification is provided to the user when a license key is deleted, or a new license key is applied over an existing license key. | An information message informing the user of the intended action displays before the key is deleted or overwritten. |
StorCycle 3.6.1
IMPORTANT
You can only upgrade to StorCycle 3.6.1 from StorCycle 3.6.0, 3.5.0, or 3.4.0. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
This release adds the capability of specifying whether the StorCycle solution should wait until data migrated / stored to a BlackPearl gateway is fully persisted to tape before the Replacement Option (Remove Source File: no links, Remove Source File: create Symbolic link, or Remove Source File: create HTML link) occurs. This feature should only be used under direction of Spectra Logic Technical Support.
StorCycle 3.6.0
IMPORTANT
You can only upgrade to StorCycle 3.6.0 from StorCycle 3.5.0 or StorCycle 3.4.0. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release improves OpenAPI documentation. improves the user interface, and adds the new features listed in the table below.
| Feature | Description |
| Single Key Encryption | S3, Amazon S3 Glacier, MS Azure, and MS Azure Archive targets can now be configured to have all files encrypted before they are migrated / stored to the target. |
| Spectra NAS Target Snapshots | Spectra NAS targets can be configured to create a snapshot of the data in a migrate / store job after the job completes. Optionally, targets with snapshots enabled can be set to read-only after migrate / store jobs complete. This provides ransomware protection, but is only suitable for a storage location dedicated to receiving data from StorCycle migrate / store jobs. |
| BlackPearl Bucket Ingest | A bucket on a BlackPearl system with data added outside of the StorCycle solution can be ingested so that the objects in the bucket are managed by the StorCycle solution. |
Resolved Issues
| Issue | Resolution |
| When an Active Directory user is added as a local user and then deleted as a local user, the user is no longer able to log in to the StorCycle solution to restore when Allow any Active Directory / LDAP user to restore is enabled. | An Active Directory user who was added as a local user and then deleted can now log into the StorCycle solution to restore when Allow any Active Directory / LDAP user to restore is enabled. |
| In the Projects report, a Post Archive Action is sometimes displayed for a restore project. | This issue no longer occurs. |
| Completed restore jobs occasionally display a status of “Active” in the Jobs panel of the Restore dashboard. | This issue no longer occurs. |
StorCycle 3.5.0
IMPORTANT
You can only upgrade to StorCycle 3.5.0 from StorCycle 3.4.0 or StorCycle 3.3.x. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release adds the new features listed in the table below.
| Feature | Description |
| Single Key Encryption | Spectra NAS, Non-Spectra NAS, and BlackPearl targets can be configured to have all files encrypted before they are migrated / stored to the target. |
| Linked Instances | A StorCycle instance can link to other StorCycle instances to allow searching for data managed by other StorCycle solution installations. |
| Single HTML File Replacement Option | Migrate / store projects now include an option to replace migrated / stored files with a single HTML link to restore all files in the project. |
| Ignore Certificate Warnings on S3 Targets | When creating an S3 or S3 Glacier target storage location, you can select to indicate that it is a trusted site and that security certificate warnings should be ignored, even if it has a self-signed or missing security certificate. |
| Exclude Files from Migrate Job by File Extension | Files to be migrated / stored can now be filtered using a Files to Exclude
setting. |
| Clone BlackPearl Storage Location | If you are creating a new BlackPearl storage location and want to use the same endpoint and credentials of an existing BlackPearl storage location, you can clone the previous BlackPearl storage location. |
| Promote Queued Job | Queued jobs can be promoted to the next job to run. |
| CentOS 7.9 | The docker image for StorCycle 3.5.0 now uses CentOS 7.9. |
| High Availability Failover on Virtual Machines | The StorCycle solution fully supports the capability of hyper-converged virtual machines (VMs) to provide failover. The VM automatically restarts the StorCycle solution on a new node if one instance fails. |
| Improved User Interface | User interface improvements include:
|
Resolved Issues
| Issue | Resolution |
| Restore jobs from a BlackPearl storage location that are larger than the Black Pearl cache fail. | Restore jobs from a BlackPearl storage location that are larger than the Black Pearl cache are now broken into several smaller jobs so that they do not fail. |
| The Mark All As Read button only marks visible messages as read. | The Mark All As Read button now marks all messages as read. |
| Report data may be inaccurate if the StorCycle solution power cycles during a migrate / store job. | This issue no longer occurs. |
| When you enter an invalid SMTP server address and click Submit, the page becomes unresponsive and after a while displays “Lost Communication with Server”. | If you enter an invalid SMTP server address while configuring SMTP, an error message indicating an invalid SMTP server address displays. |
| When a migrate / store project is deleted by retention policy, and then searched for using the option Search by tag, the project displays and can incorrectly be used in a restore project. The restore project fails with the error, “could not retrieve archive location: unable to get available archive storage location for restore job”. | This issue no longer occurs. |
| When editing a recurring project with a weekly recurrence, the day of the week selected changes to the next day of the week if the selected time to run is past midnight UTC. | This issue no longer occurs. |
| The Dashboard Configured Users count does not include restore users. | The Dashboard Configured Users count now includes restore users. |
| Restore users do not display on the Users screen and cannot be deleted. | Restore users now display on the Users screen and can be deleted. |
Known Issues
| Issue | Workaround |
| Restores may generate a security ID warning after a successful restore if the original user who was recorded as the owner of the files no longer has ownership permissions. The warning does not impact the restoration of, or access to, the data. | There is no workaround for this issue. |
StorCycle 3.4.0
IMPORTANT
You can only upgrade to StorCycle 3.4.0 from StorCycle 3.3.x or StorCycle 3.2.0. If you are upgrading from a version of the StorCycle solution other than these, contact Spectra Logic Technical Support (see Contacting Spectra Logic on page 3).
Enhancements
This release updates the user interface, improves error handling and error messages, and adds the new features listed in the table below.
| Feature | Description |
| Source S3 Storage Locations | S3 storage locations can now be used as sources. Files on an S3 source can only be migrated / stored to a BlackPearl (object) storage location, and then can only be restored to a Spectra or non-Spectra NAS storage location. |
| Daily Restore Limits for Restore Only Active Directory / LDAP Users | If you selected to allow any Active Directory / LDAP user to restore files, you can now select whether to limit the amount of data an AD / LDAP user can restore each day and if selected, enter the daily limit in either TiB or GiB. |
| Enhancements to the Migrate / Store Feature |
|
| HTML Link Enhancements |
|
| Configure Restore Target in Restore Wizard | You can now configure a new non-Spectra NAS storage location in the Restore wizard to use as the target of the restore project. |
| Select BlackPearl Bucket Data Policy | When you configure a BlackPearl storage location, you can now view and select the data policy for a new bucket. |
| Rerun Scans | On the Scan dashboard, next to each project is a Run icon to use to rerun the project with a Start Now schedule. |
| Search by Tags on Delete Page | When selecting projects to delete files, you can now search on tags. |
Resolved Issues
| Issue | Resolution |
| A single run project in the process of migrating
/ storing files displays as a candidate for deletion on the Delete Files screen. If selected, files continue to migrate / store while the project is deleted, leaving the files on the target (s) in an unknown state. |
This issue no longer occurs. |
| When a scan is interrupted due to loss of network connection, the job may report completed with no warnings or errors. | A scan job interrupted by the loss of a network interruption now the appropriate warning and errors. |
| The Restore Symbolic Links option is not available when a restore project is configured from the Catalog Search screen. | The Restore Symbolic Links option is now available when a restore project is configured from the Catalog Search screen. |
| The state for an active Migrate/Store job displays as “Completed:Errors” as soon as an errors occur. | The state for an active job with warnings or errors displays as “Active:Warnings” or “Active:Errors” as appropriate. |
| “If you attempt to run a database backup job while a retention delete job is in progress, the database backup fails and you get the error message,”default not allowing Retention Delete with BackupDb”. | This issue no longer occurs. |
| Attempting to delete a project archived to an S3 target which was not configured with an S3 Region, fails. | This issue no longer occurs. |
| A database backup may fail with the error, “must specify an archive or scanAndArchive policy type.” | This issue no longer occurs. |
Known Issues
| Issue | Workaround |
| Report data may be inaccurate if the StorCycle solution encounters a power cycle during a migrate / store job
Note: This issue is resolved in StorCycle 3.5.0. |
There is no workaround for this issue. |
| When you enter an invalid SMTP server address and click Submit, the page becomes unresponsive and after a while displays “Lost Communication with Server”.
Note: This issue is resolved in StorCycle 3.5.0. |
There is no workaround for this issue. |
CUSTOMER SUPPORT
SpectraLogic.com
December 2023
Release Notes-Spectra StorCycle Solution
Documents / Resources
 |
SPECTRA 90990139 Revision S StorCycle Solution [pdf] User Manual 90990139 Revision S StorCycle Solution, 90990139, Revision S StorCycle Solution, StorCycle Solution, Solution |
