RIB24P Enclosed Relay
“
Product Specifications:
- Type: One (1) DPDT Continuous Duty Coil
- Expected Life: 10 million cycles minimum
mechanical - Humidity Range: 5 to 95% (non-condensing)
- Operate Time: 18mS
- Relay Status: LED On = Activated
- Dimensions: 2.30 x 3.20 x 1.80 with .50 NPT
nipple - Wires: 16, 600 V Rated
- Approvals: UL Listed, UL916, UL864, C-UL,
California State Fire Marshal, CE, RoHS - Housing Rating: NEMA 1, Plenum
- Contact Ratings:
- 20 Amp Resistive @ 300 Vac
- 20 Amp Resistive @ 28 Vdc
- 20 Amp Ballast @ 277-480 Vac
- 15 Amp Resistive @ 600 Vac
- 770 VA Pilot Duty @ 120 Vac
- 1,158 VA Pilot Duty @ 240 Vac
- 1,109 VA Pilot Duty @ 277 Vac
- 1,640 VA Pilot Duty @ 480 Vac
- 3 HP @ 480-600 Vac
- 2 HP @ 240-277 Vac
- 1 HP @ 120 Vac
- Coil Current:
- 110 mA @ 20 Vac
- 138 mA @ 24 Vac
- 55 mA @ 20 Vdc
- 55 mA @ 24 Vdc
- 77 mA @ 30 Vdc
- Coil Voltage Input: 24 Vac/dc; 50-60 Hz Drop
Out = 3 Vac / 3.8 Vdc Pull in = 20 Vac / 20 Vdc
Product Usage Instructions:
Installation:
- Ensure power is turned off before installation.
- Mount the RIB24P relay securely using appropriate
hardware. - Connect the appropriate wires to the designated terminals as
per your application requirements. - Verify all connections are secure before restoring power.
Operation:
To activate the relay, apply the specified coil voltage input
(24 Vac/dc). The LED indicator will illuminate when the relay is
activated.
Maintenance:
Regularly inspect the relay for any signs of damage or wear.
Clean the relay if necessary to ensure proper functionality.
Frequently Asked Questions (FAQ):
Q: What is the coil voltage input for the RIB24P relay?
A: The coil voltage input for the RIB24P relay is 24 Vac/dc.
Q: How can I check if the relay is activated?
A: An externally visible LED indicator on the relay will
illuminate when the relay is activated, indicating its status.
Q: What are the contact ratings for the RIB24P relay?
A: The RIB24P relay has various contact ratings including
resistive, ballast, and pilot duty at different voltages. Refer to
the specifications for detailed ratings.
“`
Relays
RIB24P
Product Data
Product Description
The Functional Devices, Inc.TM RIB24P is a 20 Amp DPDT power control relay enclosed in a housing to save the installer the time, trouble and expense of buying and installing separate components such as relay, LED indicator, socket, mounting rail, transient protection and housing. The relay coil can be powered by 24 Vac/dc. An externally visible LED indicates the status of the relay coil.
Product Specifications
Type:
One (1) DPDT Continuous Duty Coil
Expected Life: 10 million cycles minimum mechanical
Operating Temp.: -30 to 140°F
Humidity Range: 5 to 95% (non-condensing)
Operate Time: 18mS
Relay Status: LED On = Activated
Dimensions: 2.30″ x 3.20″ x 1.80″ with .50″ NPT nipple
Wires:
16″, 600 V Rated
Approvals:
UL Listed, UL916, UL864, C-UL, California
State Fire Marshal, CE, RoHS
Housing Rating: NEMA 1, Plenum
Contact Ratings: 20 Amp Resistive @ 300 Vac 20 Amp Resistive @ 28 Vdc 20 Amp Ballast @ 277-480 Vac 15 Amp Resistive @ 600 Vac 770 VA Pilot Duty @ 120 Vac 1,158 VA Pilot Duty @ 240 Vac 1,109 VA Pilot Duty @ 277 Vac 1,640 VA Pilot Duty @ 480 Vac 3 HP @ 480-600 Vac 2 HP @ 240-277 Vac 1 HP @ 120 Vac
Coil Current: 110 mA @ 20 Vac 138 mA @ 24 Vac
55 mA @ 20 Vdc 55 mA @ 24 Vdc 77 mA @ 30 Vdc
Coil Voltage Input: 24 Vac/dc; 50-60 Hz Drop Out = 3 Vac / 3.8 Vdc Pull in = 20 Vac / 20 Vdc
Product Wiring
Specifications are subject to change without notice. Functional Devices, Inc. is a trademark of Functional Devices, Inc. RIB is a registered trademark of Functional Devices, Inc.
Website: www.specifiedcontrols.com 5351 East Thompson Road, Suite 128 Indianapolis, IN 46237
Tech Support: 888.359.0365
Documents / Resources
 |
Specified Controls RIB24P Enclosed Relay [pdf] User Guide RIB24P Enclosed Relay, RIB24P, Enclosed Relay, Relay |