SPATEC Zip Inline ES6 Under Sink Electronic Instantaneous Water Heater
Zip InLine ES6 under-sink electronic instantaneous water heater single outlet for hand washing. Compact design, featuring bare-wire for fast heat up, no standing heat losses. Easy to install and service.
Specifications
|
MODEL |
ENERGY CLASS (H/C) |
MIN/MAX FLOW RATE |
NOMINAL POWER RATING KW | DIMENSIONS WIDTH |
|
ES6 |
A |
1.5lpm / 3.3lpm |
5.5 kW @ 230V AC |
186mm x 87mm x 135mm |
Features and Benefits
- Compact electronic instantaneous water heater with highly energy efficient bare wire system for economic water supply to a single outlet.
- The innovatively designed appliance heats the water automatically as it flows through, without wasting energy in standby operation.
- The heating power electronically compensates for variable inlet pressures and temperatures.
- The outlet temperature factory is set to 38oC, but can be installer adjusted between 30oC to 43oC.
- Intended for use with taps having M22 /M24 nozzles.
- Easy to install and service.
Product detail
Specification type
- Product code ES6
- Product name InLine ES6 Instantaneous 5.5kW
- Energy efficiency class A
- Element type Bare Wire Heating System
- IP rating 25
Capacity, weights & dimensions
- Product weight 1.3kg
- Filled Product Weight 1.5kg
- Unit dimensions (W x D x H) mm 186 x 87 x 135
Electrical
- Nominal power rating 5.5 kW @ 230V AC
- Nominal power supply 230V
- Nominal rated current 24 amps
Plumbing
- Wholesome water supply Yes
- Water connection Size 1/2″ BSP
- Min water pressure 0.65bar
- Max water pressure 10bar
- Minimum flow rate l/pm 1.5
- Maximum flow rate l/pm 3.3
- Temperature increase at maximum flow rate 26.2°C
- Minimum water resistance @ 15oc >800 Ω
- Installation – Plumbing (H/C) The appliance is intended for connection to the wholesome water supply. It should be installed by a suitably qualified person. The appliance may be used as an unvented installation (as shown in the diagram opposite) or as a vented installation.
The minimum water pressure will vary if a limescale filter is installed. Please contact us to discuss your requirements.
Typical Installation
Energy Certificate
37a Villa Wood Road, Dromore, County Down. Northern Ireland BT25 1LG w.spatec.co.uk e: info@spatec.co.ukt: 0044 28 9269 9200
Frequently Asked Questions
Q: Can the Zip InLine ES6 be used for multiple outlets?
A: No, the Zip InLine ES6 is designed for a single-outlet handwashing application.
Q: What is the IP rating of the Zip InLine ES6?
A: The Zip InLine ES6 has an IP rating of 25.
Documents / Resources
 |
SPATEC Zip Inline ES6 Under Sink Electronic Instantaneous Water Heater [pdf] Instruction Manual ES6, Zip Inline ES6 Under Sink Electronic Instantaneous Water Heater, Zip Inline ES6, Under Sink Electronic Instantaneous Water Heater, Sink Electronic Instantaneous Water Heater, Electronic Instantaneous Water Heater, Instantaneous Water Heater, Water Heater, Heater |