SP CONNECT MAN062 Universal Interface
Product Information
- There are two versions of the mount: v1a and v1b. Choose the appropriate version for your setup.
- For v1a and v1b, use the M5x16 screw and tighten it to 3 Nm.
- For v2, use the M5x20 screw and tighten it to 3 Nm.
- Insert the appropriate adapter ring into the mount.
- Available sizes:
- Optional components can be added as needed.
- Attach the mount to the handlebar and tighten it to 3 Nm.
- Ensure the mount is securely fastened.
Specifications
| Component | Specification |
|---|---|
| Screw | M5x16 or M5x20 |
| Tightening Torque | 3 Nm |
| Adapter Ring Sizes | Ø 1.25″, Ø 1.125″, Ø 1.063″, Ø 1.000″, Ø 0.875″ |
FAQ
- What is the correct torque for tightening the screws?
- The screws should be tightened to 3 Nm.
- What are the available adapter ring sizes?
- The available sizes are Ø 1.25″, Ø 1.125″, Ø 1.063″, Ø 1.000″, and Ø 0.875″.
- Can I add optional components?
- Yes, optional components can be added as needed.
Assembly Instructions
For More Information: www.sp-connect.com
Documents / Resources
 |
SP CONNECT MAN062 Universal Interface [pdf] Instructions MAN062 Universal Interface, MAN062, Universal Interface, Interface |