SOUNDVISION FLEXY M 62LA Professional Line Array Speaker System

Specifications

SAFETY GUIDELINES

ALWAYS OBSERVE THE FOLLOWING

IMPORTANT NOTES

Power Supply: Use of Batteries

• Do not connect this unit to the same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on how the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet.
• The AC adaptor will begin to generate heat after long hours of consecutive use. This is normal, and is not a cause for concern.
• When installing or replacing batteries, always turn off the power on this unit and disconnect any other devices you may have connected. This way, you can prevent malfunction and /or damage to speakers or other devices.
• Use only suitable rechargeable batteries of the same size and type. Make sure the polarity is correct. Or it may cause this unit to malfunction.
• Pet The ten I son I sos convenient it for a long time.

Note: Please charge the battery once a month regularly if not using it for a long period.

Placement

• Using the unit near the power amplifier (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit, or move it farther away from the source of interference.
• This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.
• Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Also, do not allow lighting devices that normally are used while their light source is very close to the unit (such as a piano light), or powerful spotlights to shine upon the same area of the unit for extended periods. Excessive heat can deform or discolor the unit.
• When moved from one location to another where the temperature and /or humidity is very different, water droplets (condensation) may form inside the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.
• Do not allow rubber, vinyl, or similar materials to remain on the unit for long periods. Such objects can discolor or otherwise harmfully affect the finish.
• Do not paste stickers, decals, or the like to this instrument Peeling such matter off the instrument may damage the exterior finish.

Maintenance

• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove mild. non-abrasive detergent. Afterward, be sure to wipe the unit thoroughly with a soft, dry cloth.
• Never use benzine, thinners, alcohol, or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Additional Precautions

• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions.
• When connecting/disconnecting all cables, grasp the connector itself and pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.
• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at night or near specific places like schools or hospitals).
• When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.
• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.

PRODUCT ANNOUNCEMENT

FLEXY M 62LA Products in the box

• FLEXY M 62LA *1 Manual
• FLEXY M 15SA*1 Manual 3M power cable

ACCESSORIES

• 0.6M signal cable
• 2M signal cable
• 0.6M power cable
• 2M power cable
• 3M power cable
• FLEXY M Flybar
• FLEXY M Pole

CONFIGURATION

CONFIGURATION 1

• On-ground mode

Speaker & Accessories

• FLEXY M 62LA x1
• FLEXY M 15SA x1
• 3M power cable x1
• FLEXY M Pole x1
• 0.6M signal cable x1
• 0.6M power cable x1
• 2M signal cable x1
• 2M power cable x1

CONFIGURATION 2

On-ground mode

• FLEXY M 62LA x3
• FLEXY M 15SA x2
• 3M power cable x1
• FLEXY M Flybar
• 2M signal cable x2
• 0.6M signal cable x2
• 2M power cable x2
• 0.6M power cable x2

CONFIGURATION 3

Ground-hanging

• FLEXY M 62LA x6
• FLEXY M 15SA x3
• 3M power cable x1
• FLEXY M Flybar
• 2M signal cable x3
• 0.6M signal cable x3
• 2M power cable x3
• 0.6M power cable x3

CONFIGURATION 4

Ground-hanging

• FLEXY 62LA ＞ 6
• FLEXY M 15SA ＞3
• 3M power cable x1
• FLEXY M Flybar
• 2M signal cable ＞3
• 0.6M signal cable ＞5
• 2M power cable ＞3
• 0.6M power cable ＞5

INSTALLATION & CONNECTION

• CONFITURATION 1: Connect 1pc SUB with 1pc Satellite by pole.(Ground use and suitable for small audience/venue),Switch DSP to mode 1. 

1. connect pole, adjust pole height
2. assemble pole in FLEXY M 15SA
3. FLEXY 62LA fix in mounting pole 7.5°
4. Stack second FLEXY M 62LA speaker, select desired throw angles

POWER AND SIGNAL CONNECT

POWER AND SIGNAL CONNECT

FLEXY M 62LA FUNCTION INSTRUCTION

Overview-Connections&controls

1. POWERCON OUT: Connect another speaker’s power input.
2. POWERCON IN: Power input.
3. SERVICE DATA: Only used by the SOUND VISION customer service department. Pls don’t insert any other USB.
4. POWER: Blue indicates main power.
5. SIG/LIMIT: Power input, green indicates signal input t, and red indicates the internal circuit has tripped.
6. DSP SETUP: 4 DSP SETUP.
7. SENSITIVITY: Control Sensitivity input signal to the
   speaker (From +3dB – -6dB)
8. LINK OUT: 3pin XLR output connector(balanced line-level audio output).
9. LINE IN: 3pin XLR input connector(balanced line-level audio input).

1. MAINS INPUT: Power input
2. MAINS LINK: Power output is connected in parallel with mains input and be used to power additional speakers.
3. POWER SWITCH: Power on-off.
4. SERVICE DATA: Only used by the SOUND VISION customer service department. Pls don’t insert any other USB.
5. SIGNAL OUTPUT1: Signal output connects to another speaker signal input.
6. SIGNAL OUTPUT2: Signal output connects another speaker signal input.
7. LCD DISPLAY: Display working status and DSP control interface.
8. DSP KNOB: The knob for DSP presets.
9. SIGNAL INPUT1: Connect LINE signal.
10. SIGNAL INPUT2: Connect LINE signal.

SOUND VISION CO., LTD.
99/189 Moo.4, Sala Klang, Bang Kruai, Nonthaburi 11130 Thailand
Support: 02-433-9988
LINE Official: @soundvisionpro
Email: info@soundvision.co.th
www.soundvisionpro.com

FAQs

Q: How many configurations are available for setting up the FLEXY speaker system?

A: There are four main configurations outlined in the manual, each catering to different setups and requirements.

Q: What is the purpose of the FIR filter technology in the FLEXY M 62LA speaker?

A: The FIR filter technology helps maintain phase consistency across different frequency bands, ensuring a balanced sound output.

Documents / Resources

SOUNDVISION FLEXY M 62LA Professional Line Array Speaker System [pdf] User Manual FLEXY M 62LA, FLEXY M 62LA Professional Line Array Speaker System, Professional Line Array Speaker System, Line Array Speaker System, Array Speaker System, Speaker System

References

• User Manual