SonoFF S60ZBTPF Zigbee Smart Plug
Introduction
The S60ZBTPF is a 16A single-channel smart plug with Zigbee protocol, featuring energy monitoring and overload protection. It allows users to monitor household power consumption via the app and automate home devices. Equipped with Zigbee repeater functionality, it enhances communication quality within the Zigbee network effortlessly.
- Button
- Press once: Turn on/off the smart plug.
- Press and hold for 5 seconds: Device enters the pairing mode.
- Network indicator (Blue)
- Steady on: Normal connection with the gateway.
- Slow flash: The device is in pairing mode.
- Fast flash: Abnormal connection with the gateway.
- Quick fashing continuously: The device is in an overload protection lock state.
- Power LED indicator (Red)
- Light on: The device is on.
- Light off: The device is off.
Compatible Voice Assistants
Specification
| Model | S60ZBTPF |
| MCU | TLSR8656 |
| Input | 250V~50/60Hz MAX 16A μ |
| Max. Load | 4000W |
| Wireless Connectivity | Zigbee3.0 |
| Net Weight | 83g |
| Dimension | 50x50x61.5mm |
| Color | White |
| Casing Material | PC |
| Applicable Place | Indoor |
| Working Temperature | -10℃~40℃ |
| Working Humidity | 5%~95% RH, non-condensing |
| Certified Compliance | CE/RoHS |
Note: To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 16A has been installed before the plug.
Download the eWeLink App & Add SONOFF Zigbee Gateway
Please download the “eWeLink” App from Google Play Store or Apple App Store.
Add Device
- Enter “Scan”
- Scan the QR code on the device
- Select “Add Device”
- Power on the device
- Long press the button for 5 seconds
- The LED indicator flashes slowly for 180s
- Select Zigbee gateway
- Wait until the addition is done
Matched Gateways
Recommended SONOFF gateway models: ZBBridge-P, NSPanel Pro, iHost, ZBBridge-U
*Before adding a device, please upgrade the gateway firmware to the latest version.
Third-party compatible gateway models:
Amazon Gateway Model: Echo Plus 2nd
SmartThings Gateway Model: SmartThings Hub V3
*Other gateways supporting ZigBee3.0 wireless protocol. Detailed information is in accordance with the final product.
Factory Reset
- Press and hold the device button for 5 seconds to restore factory settings.
- Delete the device from the gateway and then restore factory settings.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S60ZBTPF is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
For CE Frequency
- EU Operating Frequency Range:
- Zigbee: 2405-2480MHz
- EU Output Power:
- Zigbee≤10dBm
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the \environment and human health. Please contact the installer or local \authorities for more information about the location as well as terms and conditions of such collection points.
Warning
- Risk of electric shock, this product is not a toy and not intended for use by children. For adult use only.
- The appliance is suitable for moderate climates only.
- The ventilation must not be impaired by covering the appliance with items such as newspapers, table cloths, curtains, etc.
- Naked flame sources, such as candles, must not be placed on the appliance. Under normal use of conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
This product is only suitable for safe use at altitudes below 2000m.
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
- Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
- ZIP code: 518000
- Service email: support@itead.cc
- Website: sonoff.tech Made in China
FAQ
- Q: Can I use this smart plug outdoors?
- A: No, this smart plug is designed for indoor use only.
- Q: What voice assistants are compatible with this smart plug?
- A: The smart plug is compatible with voice assistants such as Amazon Alexa and Google Assistant.
- Q: How can I enable the overload protection feature?
- A: The overload protection feature is automatically enabled when the device detects an abnormal connection with the gateway. The power LED indicator will flash quickly in this case.
Documents / Resources
 |
SonoFF S60ZBTPF Zigbee Smart Plug [pdf] User Manual S60ZBTPF, S60ZBTPF Zigbee Smart Plug, Zigbee Smart Plug, Smart Plug |
 |
SONOFF S60ZBTPF Zigbee Smart Plug [pdf] User Guide S60ZBTPF, S60ZBTPF Zigbee Smart Plug, S60ZBTPF, Zigbee Smart Plug, Smart Plug, Plug |