SONOFF S60 Smart Plug
Product Information
- Model: S60TPG
- MCU: ESP32-C3
- Input: 250V~, 50/60Hz, 13A
- Max. Load: 3250W
- Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
- Net Weight: 86g
- Dimension: 58x58x42mm
- Color: White
- Casing Material: PC V0
- Applicable Place: Indoor
- Working Temperature: -10°C to 40°C
- Working Humidity: 5% to 95% RH, non-condensing
- Certified Compliance: CE/RoHS
Product Usage Instructions
- Installation
Ensure a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) rated for 13A is installed before plugging in the device for electrical safety. - Downloading the App
Download the eWeLink App to your mobile device from the Google Play Store or Apple App Store.
Adding the Device
- Scan the QR code on the device using the app.
- Long press the button on the device for 5 seconds to enter pairing mode.
- Check the Wi-Fi LED indicator for flashing status (Two short and one long flashes).
- Select the Wi-Fi network and enter the password in the app to complete the device setup.
Frequently Asked Questions
Q: How can I check the daily or monthly power consumption?
Q: What should I do if the Wi-Fi LED indicator is not flashing as expected?
Q: Can I use this smart plug outdoors?
Introduction
A “safe and reliable” Wi-Fi Smart Plug with main functions such as remote control, power monitoring, and voice control. You are able to check the daily/monthly power consumption on the energy overview page in the eWeLink App. Home automation can be achieved by the configuration of smart scenes, timers, schedules, etc.
Description
- Button
- Press once: Turn on/off the smart plug.
- Press and hold for 5 seconds: The device enters the pairing mode.
- Wi-Fi LED indicator (Blue)
- Keeps on: The device is online.
- Two short and one long flashes: The device is in pairing mode.
- Quick flash: Router not connected.
- Flash twice: Connected to the router, but not connected to the cloud.
- Flash three times: Firmware upgrade in progress.
- Power LED indicator (Red)
- Light on: The device is on.
- Light off: The device is off.
Compatible Voice Assistants
Specification
| Model | S60TPG |
| MCU | ESP32-C3 |
| Input | 250V~, 50/60Hz, 13A |
| Max. Load | 3250W |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz |
| Net Weight | 86g |
| Dimension | 58x58x42mm |
| Color | White |
| Casing Material | PC V0 |
| Applicable Place | Indoor |
| Working Temperature | -10℃~40℃ |
| Working Humidity | 5%~95% RH, non-condensing |
| Certified Compliance | CE/RoHS |
Note:
To ensure the safety of your electrical installation, either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 13A must be installed before the plug.
Download the“eWeLink”App
Please download the “eWeLink” App from the Google Play Store or Apple App Store.
Add Device
- Enter“Scan”
- Scan the QR code on the device
- Select“Add Device”
- Plug in
- Long press the button for 5 seconds
- Check the Wi-Fi LED indicator flashing status (Two short and one long flash)
- Search for the device and start connecting
- Select the “Wi-Fi” network and enter the password
- Device added completely
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S60TPG complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://sonoff.tech/usermanuals.
SAR Warning
Under normal use of conditions, this equipment should keep a separation distance of at least 20 cm between the antenna and the body of the user.
For CE Frequency
Operation frequency Range
- BLE: 2402-2480MHz
- Wi-Fi Operation Frequency: 802.11 b/g/n20 2412-2472 MHz，802.11 n40: 2422-2462 MHz
- RF Output Power: BLE: ≤10dBm，Wi-Fi: ≤20dBm
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
- Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
- ZIP code: 518000
- Service email: support@itead.cc
- Website: sonoff.tech
Made in China
Documents / Resources
 | S60 Smart Plug |
References
- User Manualsonoff.tech
- User Manualmanual.tools
Necesito programarlo para que encienda cada media hora y apague a los 15 minutos repetidamente desde las 7h a las 19h. ¿Es posible? Gracias
How can I program the SONOFF S60 to turn on every 30 minutes and off after 15 minutes repeatedly between 07:00 and 19:00?
Yes, this is possible using the eWeLink App, which is the official application for the SONOFF S60. You can achieve this specific cycle using the Loop Timer feature or by creating a Smart Scene.
To set this up:
For further assistance with the app interface, you can contact Sonoff support at support@itead.cc.
Read the full Q&A page