MINI-RBS, MINI-RBS-MS Smart Roller Shutter Switch
Specifications
- Model: MINI-RBS, MINI-RBS-MS
- MCU: ESP32
- Rating: 100-240V~ 50/60Hz 1A Max
- Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz
- Net weight: 25.1g
- Product dimension: 39.5x33x16.8mm
- Color: White
- Casing material: PC
- Applicable place: Indoor
- Working temperature: -10 ~40°C
- Working humidity: 5-95%RH, non-condensing
- Working height: Less than 2000m
- Certification: CE/FCC/RoHS
- FCC ID: 2APN5-MINIRBS
- Pollution degree: 2
- Rated impulse voltage: 4kV
- Automatic action: 10000 Cycles
- Control type: Type 1.B
- Diameter of wiring (recommend): 18AWG to 14AWG SOL/STR copper
conductor only
Installation
- Power off: Please ensure the power is off
before proceeding with installation. - Wiring instruction: Follow the provided wiring
instructions carefully. Ensure a professional electrician handles
the installation.- Momentary Switch Wiring:
- Three-Position Rocker Switch Wiring:
- Make sure all wires are connected correctly.
- Power on: After wiring, power on the device.
It will enter pairing mode by default.
Product Usage Instructions
- Remote Control: Use WiFi remote control for
easy operation. - Percentage Control: Control the curtain
position with percentage accuracy. - Timer Schedule: Set schedules for automatic
curtain operation. - Deviation Calibration: Calibrate the curtain
position deviation if needed. - Voice Control: Control the curtain using voice
commands. - eWeLink Remote: Remote control via the eWeLink
app. - Smart Scene: Set up smart scenes for
customized automation. - Compatible with Various Curtain Types:
Suitable for different curtain types.
FAQ
- How do I exit Pairing Mode?
The device will exit Pairing Mode if not paired within 10 minutes.
To manually enter Pairing Mode, long press the button for about 5
seconds until the LED indicator changes. - What is the maximum continuous operation time for the
motor?
The maximum one-way allowable continuous operation time for the
motor in this device is 2 minutes. Pause the operation before the
curtain reaches its limit position to avoid motor damage.
U R S R S S ser anual M
MINI- B , MINI- B -M (EN)
Smart Roller Shutter Switch
User Manual V1.0
Introduction
This compact smart curtain retrofit is designed to fit perfectly into an EU-type mounting box and supports motors with a maximum current of 1A as a load. It offers WiFi remote control and is compatible with the Matter platform, enabling seamless integration across multiple smart home systems. Simply connect the device to the switch and motor correctly to easily upgrade ordinary electric roller shutters to smart systems.
Remote Control
Percentage Control
Timer Schedule
Deviation Calibration
1
Voice Control
eWeLink Remote
Smart Scene
Compatible with Various Curtain
Types
Button
· Press and hold for 5 seconds: Device
enters the pairing mode. (Pairing time 10 minutes)
· Short press three times: Switch the
external switch type.
LED indicator (Blue)
· Keeps on: Online. · Flashes once: Offline · Flashes twice: LAN · Flashes two short and one long: Device is
in pairing mode.
· Breathing mode (press and hold the
button for 10 seconds): The device successfully marks the “fully open” position of the curtain.
· Flashes three times (short press the
button once while in breathing mode): The device successfully marks the curtain in the “fully closed” position.
· Flashes three times: The switch type is
successfully switched.
Matter-compatible Ecosystem
2
Specification
Model MCU Rating Wireless connectivity Net weight Product dimension Color Casing material Applicable place Working temperature Working humidity Working height Certification FCC ID Pollution degree Rated impulse voltage Automatic action Control type Diameter of
wiring(recommend)
MINI-RBS, MINI-RBS-MS ESP32 100-240V~ 50/60Hz 1A Max Wi-Fi IEEE 802.11 b/g/n 2.4GHz 25.1g 39.5x33x16.8mm White PC Indoor
10T40 (-10 ~40 )
5-95%RH, non-condensing Less than 2000m CE/FCC/RoHS 2APN5-MINIRBS 2 4kV 10000 Cycles Type 1.B 18AWG to 14AWG SOL/STR copper conductor only
3
The products is designed to be completely installed into a flush mounted box and enclosed with a cover plate or switch that fullfill the correspoding national standard requirement. There shall be no explosure of any part of the product after installation. Les produits sont conçus pour être complètement installés dans une boîte encastrée et enfermés avec une plaque de couvercle ou un commutateur qui remplissent les exigences correspondantes de la norme nationale. Il n’y aura aucune explosion d’une partie quelconque du produit après installation. *This product is only suitable for safe use at altitudes below 2000m.
Installation 1. Power off
WARNING
Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!
2. Wiring instruction 4
To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Cicuit-breaker with Integral Overcurrent protection(RCBO) with an electrical rating of 1A has been installed before the MINI-RBS, MINI-RBS-MS. Momentary Switch Wiring:
Three-Position Rocker Switch Wiring:
5
*Make sure all wires are connected correctly.
Instructions for wiring symbols
Terminals N L L out1 L out2 S1 S2
Neutral Line Live Line Live Output Terminal__1(100~240V) Live Output Terminal__2(100~240V) Switch_1 (Forward Control) Switch_2 (Reverse Control)
Wires
N
Neutral Line
L
Live Line 100~240V
Forward Line
Motor Forward Line
Reverse Line
Motor Reverse Line
3. Power on
When the device is used for the first time, it will enter pairing mode by default after being powered on. At this time, the LED indicator will flash in a pattern of “two short and one long”.
6
*The device will exit the Pairing Mode if not paired within 10mins. If you want to enter this mode, please long press button for about 5s until the LED indicator changes in a cycle of two short and one long flash and release. *As the maximum one-way allowable continuous operation time for the motor in this device is 2mins, please pause the operation before the curtain reaches its limit position to avoid damaging the motor.
Check the Device Status
1. External switch type
The types of external switches supported are
three-position rocker switches and
momentary switches, with the default setting from the factory being the rocker switch
(Edge Mode).
The method to switch the external switch type: Short press the button three times and
the blue light flashes 3 times, then the switch type is switched successfully.
External switch trigger mode switching sequence (cycle): Edge Mode
Pulse Mode
Following Mode
2. Roller shutter direction test
7
Press the external switch to check if the roller shutter moves in the correct direction. If it does not, power off the device, swap the Lout1 and Lout2 wires, and test again.
Important Prerequisite Confirmation Please select the appropriate section based on the ecosystem you are using (Matter or eWeLink). Follow the corresponding steps to complete the “Add Device” and “Travel Calibration” operations.
Matter Ecosystem User Guide
1. Add Device
Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.
Add to Apple via Matter
Add to Google via Matter
Add to Alexa via Matter
Add to SmartThings via Matter
2. Travel Calibration
Using percentage control requires travel calibration. Please select one of the following
two calibration options based on your needs.
Method 1:Automatic calibration
Press and hold the device button for more than 10 seconds until the LED indicator
enters breathing mode. The device will then automatically control the motor for calibration.
8
Method 2:Manual calibration
Press and hold the device button for more than 10 seconds until the LED indicator
enters breathing mode. Then, briefly press the device button to enter “Manual Calibration” mode.
Manually open the curtains completely, then briefly press the device button until the
LED indicator flashes three times.
9
Wait for the device to automatically close the curtains, then briefly press the device
button again until the LED indicator flashes three times. This completes the “Manual Calibration.”
Control the device through the App and check the fully open or fully closed positions. If
there is any discrepancy, you can recalibrate.
fully open
fully closed
eWeLink Ecosystem User Guide
1. Add Device
Download the eWeLink App
Please download the “eWeLink” App from Google Play Store or Apple App Store.
10
Documents / Resources
 |
SonoFF MINI-RBS, MINI-RBS-MS Smart Roller Shutter Switch [pdf] User Manual MINI-RBS, MINI-RBS-MS, MINI-RBS MINI-RBS-MS Smart Roller Shutter Switch, MINI-RBS MINI-RBS-MS, Smart Roller Shutter Switch, Roller Shutter Switch, Shutter Switch, Switch |