SwitchMan
M5-80/86
Quick Guide V1.1
SwitchMan Smart Wall switch
Power Off
Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
Wiring Instruction
When the wall-mounting box is made of plastic and the size is small, the protective cover can be omitted.
Download the eWeLink App
Power on
After powering on, the device will enter the Pairing Mode during the first use.
The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
The device will exit the Pairing Mode if not paired within 10mins. If you want to enter this mode, please long press any pairing button for about 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
Add device
Method 1: Matter Paring
Open a Matter-compatible App (e.g. Alexa App, Apple Home App, or Google Home App, etc ) to scan the Matter QR code on the Quick Guide or the device it self to add the device,
Method 1: Scen QR Code to Add Device
Open the eWeLink App and scan the QR code on the device, then follow the instructions given by the app to proceed.
Note: If the page doesn’t display after scanning the code, please power on the device and then click the ‘+’ button in the top right corner of the eWeLink App homepage. Select ‘Add Device‘ to proceed.
User Manual
https://sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
| Scatola | Scatola | Manuale | Borsa | Borsa |
| PAP 20 | PAP 21 | PAP 22 | CPE 7 | LDPE 4 |
| Carta | Carta | Carta | Plastica | Plastica |
SAR Warning
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
“To ensure the safety of your electrical installation, it’s essential either a Miniature Circuit Breaker (MCB) or a Residual Current operated Cicuit- breaker with integral Overcurrent protection(RCBO) with an electrical rating of 10A(1C, 2C), 6A (3C) has been installed before the M5-1C-80, M5- 2C-80, M5-3C-80, M5-1C-86, M5-2C-86, M5-3C-86, M5-1C-80W, M5-2C- 80W, M5-3C-80W, M5-1C-86W, M5-2C-86W, M5-3C-86W.
EU Declaration of Conformity
Hereby, Shenzhen Sonoff Technologies Co., Ltd declares that the radio equipment type M5-1C-80, M5-2C-80, M5-3C-80, M5-1C-86, M5-2C-86, M5-3C-86, M5-1C-80W, M5-2C-80W, M5-3C-80W, M5-1C-86W, M5-2C-86W, M5-3C-86W.is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
EU Operation frequency Range:
Wi-Fi:
802.11b/g/n20:2412-2472MHz
802.11N40:2422-2462MHz
BLE:2402-2480MHz
EU RF Output Power:
Wi-Fi 2.4G<20dBm
BLE<10dBm
WEEE Warning
WEEE Disposal and Recycling Information All products bearing this symbol arewaste electrical and electronic equipment (WEEEas in directive 2012/19/EU)which should not be mixed with unsorted householdwaste. Instead, you shouldprotect human health and the environment by handingover your waste equipment to a designated collection point for the recycling of waste electricaland electronic equipment, appointed by the government or local authorities.
Correct disposaland recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about thelocation as well as terms and conditions of such collection points.
Shenzhen Sonoff Technologies Co., Ltd.
3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
ZIP code: 518000
Service email: support@itead.cc
Website: sonoff.tech
MADE IN CHINA
Documents / Resources
 |
SONOFF M5-86W Smart Matter Switch [pdf] User Guide M5-80, M5-86, M5-86W Smart Matter Switch, M5-86W, Smart Matter Switch, Matter Switch, Switch |