SONOFF ERBS Roller Shutter Wall Switch Enclosure
Specifications
- Product Name: Roller Shutter Wall Switch Enclosure ZH JA
- Product Dimension: 86x86x34mm
Product Usage Instructions
- Follow the guidelines for assembling the device.
- Make sure to refer to the user manual for detailed instructions specific to your model.
- Follow the image guide provided to install the DIY modification part onto the back bracket of the Switch Plate Cover.
- Utilize the reverse and forward functions of the device as per your requirements.
- Refer to the user manual for detailed instructions on how to operate these functions.
Product Introduction
- This switch plate cover is designed specifically for SONOFF retrofit modules (MINI-RBS, MINI-ZBRBS).
- It perfectly fits the retrofit modules, provides seamless installation, and adds physical switch control functionality.
Pre-Installation Preparation
Power off
WARNING
- Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!
Device Assembly
Follow the Guidelines in the image above to install the DIY modification part onto the back bracket of the Switch Plate Cover.
Installation
Wiring instruction
Install in the Mounting Box
Product dimension: 86x86x34mm
WARNING
- This product is not a toy and is not intended for use by children. For adult use only.
- Naked flame sources, such as candles, must not be placed on the appliance.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE, as in directive 2012/19/EU), which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
EU Declaration of Conformity
The manufacturer hereby declares that this equipment, ERBS, is in compliance with the applicable Directives and European Norms and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
CONTACT
- Shenzhen Sonoff Technologies Co., Ltd.
- 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China ZIP
- code: 518000
- Website: sonoff.tech
- Service email: support@itead.cc
- MADE IN CHINA
FAQ
- Q: Can children use this product?
- A: No, this product is not intended for use by children and should only be used by adults.
- Q: Where can I find the EU Declaration of Conformity?
- A: The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/compliance/
Documents / Resources
 |
SONOFF ERBS Roller Shutter Wall Switch Enclosure [pdf] User Guide ERBS Quick Guide V1.0, ERBS, ERBS Roller Shutter Wall Switch Enclosure, Roller Shutter Wall Switch Enclosure, Shutter Wall Switch Enclosure, Wall Switch Enclosure, Switch Enclosure, Enclosure |