SONICWARE-LOGO

SONICWARE ELZ_1 Play Firmware

SONICWARE-ELZ-1-Play-Firmware-PRO

Product Information

Specifications:

  • Product Name: ELZ_1 Play
  • Method of Update: Firmware update via USB connection to PC or Mac

Product Usage Instructions

Updating the ELZ_1 Play Firmware:

  1. Download the latest firmware from the SONICWARE website.
  2. Copy the firmware file to the external card storage with the following path: USB Drive: ELZ_1 play.bin
  3. Turn off the power of the ELZ_1 Play.
  4. Press and hold the button while turning on the power.

Note: If using battery power, ensure you have new batteries installed before starting the update process. It is crucial not to interrupt the power supply during the update to prevent any issues with the unit’s startup.

FAQs

  • Q: What should I do if the update process is interrupted?
    A: If the update process is interrupted, the unit may not start properly. In such a case, please contact customer support for further assistance.

Updating the ELZ_1

The ELZ_1 play firmware can be updated by connecting the ELZ_1 play to a PC or Mac by USB and transferring an update file.

  1. Download the latest firmware from the SONICWARE website and copy it to the external card storage. See “Accessing the ELZ_1 play card from PC/Mac (USB mass storage mode)” Copy to “USB Drive:\ELZ_1 play.bin”
  2. Turn the ELZ_1 play power off.
  3. Turn the power on while pressing the SONICWARE-ELZ-1-Play-Firmware-1 button.
  4. Use the SONICWARE-ELZ-1-Play-Firmware-2 buttons to select SYSTEM UPDATE.
  5. Press the SONICWARE-ELZ-1-Play-Firmware-3 button.
  6. If there are no problems in the firmware file check, press the SONICWARE-ELZ-1-Play-Firmware-3 button to start the update.
  7. When “Please restart” is shown, turn the ELZ_1 play off.
  8. Turn the ELZ_1 play on again.

POINT!

  • If operating on battery power, use new batteries.
  • Do not interrupt the power supply during an update. Doing so could make the unit unable to start properly.
  • Recognition of the ELZ_1 play could take about 10–30 seconds the first time it is connected, depending on the type of PC/Mac.
  • Do not disconnect the USB cable or turn the power off before it is recognized.

Documents / Resources

SONICWARE ELZ_1 Play Firmware [pdf] Instructions
ELZ_1 Play Firmware, ELZ_1, Play Firmware, Firmware

References

Leave a comment

Your email address will not be published. Required fields are marked *