somfy 1 And 5 Channel Ysia Zigbee Controls

The simple, elegant, versatile control for Zigbee equipment. Works as a direct control or as part of a connected TaHoma switch solution.

PRODUCTS MAIN FUNCTIONALITIES

COMPATIBLE END PRODUCTS

BENEFITS FOR PROFESSIONALS

Convenience

• Compatible with a wide range of Somfy Zigbee 3.0 equipment and Zigbee 3.0 partnering products.
• Control one individual or one group of motorised Zigbee products per channel.

Easy Installation

• Sleek, modern look; adding a touch of elegance to every décor.
• LED feedback for easy troubleshooting and installation.

Easy programming and adjustment with TaHoma® pro

• Simple, error free programming and pairing through TaHoma Pro application.

BENEFITS FOR END USERS

Convenient and smart

• Effortlessly controls your motorized Zigbee 3.0 products
• MY Button saves a favorite position for quick and easy access.
• Comes with a discreet wall mount (White)
• Available in 1 and 5-channel options
• Compatible with TaHoma switch
• Seamlessly works in either a standalone or TaHoma solution set up.
• LED Information feedback. Emits a visual LED signal to confirm the order has been sent.
• Battery level feedback of Zigbee Ysia controls can be viewed within the TaHoma by Somfy application only.

DIMENSIONS OF CONTROL

• L1 135mm
• L2 42mm
• L3 13mm

DIMENSIONS OF WALL MOUNT

• L1 58mm
• L2 24mm
• L3 5.5mm

BOX INCLUSIONS

• 1 x Ysia Zigbee remote
• 1 x User guide
• 1 x Wall mount
• 2 x Screws and anchors
• 2 x AAA Batteries

TECHNICAL SPECIFICATIONS

• Radio Protocol
  • Zigbee 3.0
• Frequency
  • 2.4GHz
• IP Rating
  • IP20 Indoor use only
• Radio Range
  • 7m [in room: extendable with Zigbee repeaters]
• Battery Type
  • 2 x AAA batteries
• Battery Lifetime
  • 4 Years (based on 10 commands per day)
• Working Temperature
  • 0°C to 48 48°C

ITEM NUMBERS

• Ysia 1 Channel Pure
  • 1871153
• Ysia 5 Channel Pure
  • 1871154
• 5 pack Wall Supports (Spare part)
  • 9028373

BUTTONS & INDICIATOR GUIDE FOR END USERS

ELEMENT                                                                         FUNCTION

1	UP Button	Up directional button
2	MY Button	•     “my” favourite position: Press button twice •     STOP command: Press button once.
3	DOWN Button	Down Directional button
4	LED Indicator	Indicates Channel Selection
5	Channel Selector Button	Select channel to operate
6	Programming Button	Initiates Zigbee programming
7	QR Code	To pair transmitter with the Zigbee network

BUTTONS & INDICIATORS FOR INSTALLERS

BATTERY INSTALLATION & REPLACEMENT

1. PRESS down on the top middle of the battery cover below the channel selector button.
2. SLIDE the battery cover down to remove
3. FOLLOW product markings for battery orientation
4. INSERT batteries into the correct positions
5. SLIDE the battery cover back into position

YSIA FACTORY RESET INSTRUCTIONS

Once the Ysia control is factory reset is complete; the remote settings cannot be recovered.

1. PRESS & HOLD The programming button on the remote until the LED blinks RED 3 times. NOTE the process takes approximately 15 seconds.
   RELEASE the programming button and confirm the long blinking AMBER LED.
2. The remote is now in programming mode for 3 minutes.

Version 1: May 2024 SOMFY Pty Limited ABN 77 003 917 244 20/38 46 South St, Rydalmere NSW 2116 T +61 (0)2 8845 7200 somfy.au@somfy.com

Documents / Resources

somfy 1 And 5 Channel Ysia Zigbee Controls [pdf] User Manual 1 And 5 Channel Ysia Zigbee Controls, 1 And 5 Channel, Ysia Zigbee Controls, Zigbee Controls, Controls

References

• User Manual