WB25QACNDU Series Monitor Digital Signage
“
Product Specifications
- Model Name: WB25QACNDU0/SM, WB25QACNDU1/SM
- Power Supply (AC/DC Adapter): Input – AC 100V ~ 240V, 50/60Hz
1.5A; Output – DC 19V, 3.0A - Resolution: 1080(H) x 2560(V)
- Working Temperature: 0 – 40°C
- Working Humidity: Max 80%
- Product Size (mm): 285 x 606 x 30
- Operating System: Android 7.1
- CPU: Quad Cortex A17 / 1.8Ghz
- RAM/ROM: 2 G bytes(DDR3) / 8 G bytes(eMMC)
Product Usage Instructions
Setting Method
- Install the bracket on the wall.
- Connect the LAN cable, mouse, keyboard, and power supply to the
respective ports at the top of the rear of the product using 8
M4*15mm screws. - Mount the SET on the bracket.
- Connect the power supply to the port at the top of the rear of
the product and turn on the Set.
Installation Method – Software Update
- Prepare a USB storage device with FAT32 file system.
- Copy update.zip to the top folder in the USB storage and
connect the USB memory to the set. - After confirming the correct file path, click the Install
button. - An automatic update will occur after the update preparation is
complete.
Installation Method – Wi-Fi Setup
- Turn on Newton Signage and navigate to Settings on the main
screen. - Click the Wi-Fi tab.
- Set Wi-Fi to enable and connect to the desired Wi-Fi network by
entering the password and clicking CONNECT. - The connection is complete when Connected is displayed below
the selected Wi-Fi and the Wi-Fi icon appears in the upper right
corner.
Frequently Asked Questions (FAQ)
Q: How do I perform a software update on the product?
A: To update the software, prepare a USB storage device with
FAT32 file system, copy the update file to it, connect it to the
set, confirm the file path, and initiate the update process by
clicking Install.
Q: How can I connect the product to a Wi-Fi network?
A: Turn on the device, access Settings, navigate to Wi-Fi tab,
enable Wi-Fi, select your desired network, enter the password, and
click CONNECT to establish a connection.
“`
WB25QACNDU0/SM WB25QACNDU1/SM
Install Manual
Contents
1. Set Contents
3
2. Name and description of each part
4
3. Setting Method
5
4. Installation Method
6
5. Product Specifications
8
6. Caution
9
2
1. Set Contents
Check the components below in the package box.
25inch Signage
Bracket
AC/DC Adapter
Dipole Antenna
AC Cable
2. Name and description of each part
Top part of the back of the product
PORT LAN USB Type A USB Micro Type B POWER Antenna
Check specifications Connect the Internet LAN cable. This port connects a wired terminal device (USB) mouse, Keyboard, and USB memory. It is used only for development purposes.
19V DC Power Jack
Used as a Wi-Fi antenna
3. Setting Method
Connect peripheral devices.
Top part of the back of the product
LAN
USB type A
USB Micro type B
1 Install the bracket on the wall 2 Connect the LAN cable, mouse, keyboard and power supply to each (Connect 8 M4*15mm screws)). port at the top of the rear of the product.
Top part of the back of the product
DC POWER
3 Mount the SET on the bracket.
2 Connect the power supply to port at the top of the rear of the product and turn on the Set.
4. Installation Method
S/W
1 Prepare USB storage with file system FAT32.
5 Automatic update will be performed after rebooting.
2 Copy update.zip to the top folder in the USB storage and connect the USB memory to the set.
6 After the update is complete, reboot to display the update results.
3 After confirming that the file path is correct, click the Install button.
4 After the update preparation is complete, an automatic reboot will occur.
4. Installation Method
Wi-Fi
1 Turn on Newton Signage and go to Settings on the main screen.
4 Enter the password and click CONNECT.
2 Click the Wi-Fi tab.
5 The connection is complete when Connected is displayed below the selected Wi-Fi and the Wi-Fi Mark appears in the upper right corner.
3 Set Wi Fi to enable and connect the Wi- Fi you want to use.
7
5. Product Specifications
H/W Specification
Division Model Name Power Supply (AC/DC Adapter) Resolution Working Temperature Working Humidity Product Size (mm) Operating System
CPU RAM/ROM
Description WB25QACNDU0/SM WB25QACNDU1/SM Input : AC 100V ~ 240V, 50/60Hz 1.5A Output : DC 19V, 3.0A 1080(H) x 2560(V)
0 – 40 C
Max 80%
285 x 606 x 30
Android 7.1
Quad Cortex A17 / 1.8Ghz
2 G bytes(DDR3) / 8 G bytes(eMMC)
Main body input/output specifications
ITEM Internet Port
USB Port Wi-Fi
Standard RJ45, 10/100/1000 Mbps (Top)
USB 2.0 Type A 1pcs Port (Top 1A) USB 2.0 Type Micro B 1pcs Port (Top 500mA)
802.11 b/g/n 1×1 (Dipole Antenna)
8
6. Caution.
FCC Information to User[FCC ID : 2AFWN-WB25QACNDU0SM]
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IMPORTANT NOTE : FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Any Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
9
ISED Information to User [IC :22800-WB25QACNDU0]
[French] Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Attention: Tout changement ou modification non expressément approuvé par le fabricant peut annuler le droit de l’utilisateur à utiliser l’équipement. exposition aux rayonnements radiofréquences. Pour se conformer aux exigences de conformité de l’exposition IC RF, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil et toutes les personnes.
[English] This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Caution: Any change or modification not expressly approved by the manufacturer may void the user’s right to use the equipment. exposure to radiofrequency radiation. To comply with the IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
Product Maker : SOLUM Model Name : WB25QACNDU0/SM , WB25QACNDU1/SM
-PMN(Product Marking Name) Monitor (Digital Signage) -FVIN(Firmware Version Identity Number) V3.0.5
10
Documents / Resources
 |
SOLUM WB25QACNDU Series Monitor Digital Signage [pdf] Installation Guide 2AFWN-WB25QACNDU0SM, 2AFWNWB25QACNDU0SM, wb25qacndu0sm, WB25QACNDU Series Monitor Digital Signage, WB25QACNDU Series, Monitor Digital Signage, Digital Signage, Signage |