SOLPEX ‎9936 Solar Pathway Lights

INTRODUCTION

The SOLPEX 9936 Solar Pathway Lights are a gorgeously designed set of six bronze-finished lights that are ideal for walkways, patios, gardens, and lawns. They will enhance your outdoor environment. These sturdy path lights, which retail for $38.59, have a traditional glass and metal design that blends style and use. With improved solar panels for quicker charging, the lights, which were first made available in 2020 by reputable manufacturer SOLPEX, provide 8–10 hours of evening illumination from just 6–8 hours of sunlight. These solar lights are perfect for creating warm, inviting outdoor environments because of their warm 3000K color temperature, water-resistant IP44 rating, and 8 lumens of brightness per unit. Installation is simple and requires no tools because it is made to switch on automatically at dusk and off at dawn. These lights are designed to endure weather conditions and enhance the beauty of your driveway or yard with their bronze anti-rust finish.

SPECIFICATIONS

Brand	SOLPEX
Product Name	Solar Pathway Lights Outdoor (Model 9936)
Color	Bronze
Material	Metal & Transparent Glass
Finish Type	Bronze Finish
Style	Garden
Light Fixture Form	Path
Light Mode	Stay
Brightness	8 Lumens
Color Temperature	3000 Kelvin (Warm White)
Lighting Time	8–10 hours after full charge
Charging Time	6–8 hours of sunlight
Efficiency	22.22 lumens per watt
Battery Type	1.2V AA Ni-MH Rechargeable (Pre-installed)
Voltage	1 Volt
Wattage	0 Watts (Solar powered)
Waterproof Rating	IP44 (Weather Resistant – Rain & Light Snow)
Rust Resistance	Yes – Anti-rust coating on metal
Installation Type	Ground Stake
Switch Type	Push Button
Unit Count	6 Count
Product Size	Height: 18.1 in; Top Diameter: 5.1 in
Power Source	Solar Powered
Application Areas	Lawn, Patio, Yard, Garden, Pathway, Walkway, Driveway
Special Features	Elegant Bronze Design, Explosion-Proof Glass, Energy Efficient
Tips for Use	Loosen soil with a shovel before installation

WHAT’S IN THE BOX

• Lights
• User Guide

OVERVIEW

FEATURES

• Improved Solar Panel: Provides effective power conversion and charges more quickly under sunlight.
• Extended Runtime: After 6–8 hours of direct sunshine, it will continue to illuminate for 8–10 hours.
• Sturdy Metal Construction: For durability and attractiveness, bronze-finished metal was used in its construction.
• Elegant Bronze Design: Combines a sophisticated appearance with the attractiveness of a patio, grass, or garden.
• IP44 Waterproof Rating: Suitable for year-round use, it can withstand rain and mild snowfall.

• Anti-Rust Coating: Metal is shielded from weather and corrosion by an anti-rust coating.
• Push-Button Switch: A push-button switch is an easy-to-use manual control.
• Rechargeable Battery Included: For convenience, a 1.2V AA Ni-MH battery is pre-installed.
• Soft Warm Lighting: Creates a comfortable nighttime glow with 3000K warm white light.
• Glass Lamp Covers: Transparent and heat-resistant, glass lamp covers improve safety and light diffusion.
• 8 Lumen Brightness: Perfect for adding accent lighting to walks, gardens, and walkways.
• Energy-Efficient: Using just solar power lowers energy expenses.
• Stay Mode Lighting: Continuous illumination without cycles of flashing or dimming.
• Size and Height: Each light is 18.1 inches tall and has a head diameter of 5.1 inches, making it ideal for visibility.
• 6-Pack Value: Perfect for lining garden margins or roads, this product covers a larger ground surface.

SETUP GUIDE

• Check Parts: Make sure all the parts are there before unpacking the six lights.
• Remove Isolator Tab: Before using, take the isolator tab out of the battery compartment.
• Pre-Charge in Sun: Before using the lights for the first time, let them fully charge in direct sunshine for 6 to 8 hours.
• Choose Sunny Location: Select a location for the installation that receives full sun all day long.
• Loosen Soil: Wherever you intend to set the stake, loosen the earth using a spade.
• Secure Stakes: To prevent tilting, drive the stake deeply into the earth.
• Avoid Shading: Verify that no plants or other things are shading the solar panel.
• Space evenly: For best coverage, place each light two to three feet apart.
• Tighten Glass Covers: Before putting the glass covers outside, make sure they are tight.
• Activate Switch: Before inserting in the ground, activate the push-button switch.
• Avoid Damage Zones: Steer clear of places where lights could be struck by lawnmowers or trimmers.
• Tilt for Effect: If you want ornamental angle lighting, tilt slightly forward.
• Pre-Dig in Hard Soil: Dig a hole beforehand and then push in the light if the earth is hard.
• Line Pathways: Place along sides or trails to make walkways obvious.
• Allow Auto-On Adjustment: Give the auto-on/off feature a full day to adjust to the patterns of the sun.

CARE & MAINTENANCE

• Clean Panels Regularly: To increase efficiency, wipe off solar panels with a gentle, moist cloth every one to two weeks.
• Avoid Abrasive Cleaners: Steer clear of aggressive cleaners that could scratch the glass or panels.
• Clear Base Debris: Regularly inspect and clean the dirt or debris surrounding the stake base.
• Remove Winter Snow: In the winter, clear the solar panel of any collected snow.
• Replace Batteries: For continuous operation, change the battery every six to twelve months.
• Check Battery Connection: Check the battery connection and replace it if necessary if the lights fade or cease operating.
• Store During Harsh Weather: If not in use for extended periods of time or in severe weather, store indoors.
• Inspect Glass Covers: Examine glass coverings for fogging or cracks, then use a moderate glass cleaner to clean them.
• Tighten Parts: As necessary, tighten loose parts to preserve structure.
• Avoid Chemical Sprays: Steer clear of employing chemical sprays close to the lights as this could harm the coating.
• Remove Obstructive Plants: Remove any vegetation or plants that could obstruct the panels’ access to sunlight.
• Rotate Periodically: To adapt to the shifting location of the sun, rotate lights periodically.
• Re-Secure After Storms: To guarantee correct alignment, re-secure lights following storms or high winds.
• Maintain Bronze Finish: To keep the bronze’s ornamental appeal, keep its surface clean.
• Use Silica Gel in Storage: To avoid moisture accumulation during storage, use silica gel packets.

TROUBLESHOOTING

PROS & CONS

PROS

• Elegant bronze metal and glass design
• Improved solar panel for efficient charging
• Automatic dusk-to-dawn functionality
• Easy installation with no tools required
• Weather-resistant with anti-rust coating

CONS

• Ground stake may require pre-loosened soil
• IP44 rating may not withstand heavy storms
• Only one lighting mode (steady)
• Battery may weaken over extended use
• Slightly higher price for 6-pack compared to plastic models

WARRANTY

The SOLPEX 9936 Solar Pathway Lights are backed by SOLPEX’s customer satisfaction guarantee. While a specific warranty period isn’t mentioned on the product listing, SOLPEX encourages customers to reach out directly with any concerns. The company is known for responsive support and aims to resolve product issues quickly, whether that’s battery replacement, unit malfunction, or installation assistance. Always retain your proof of purchase for service eligibility.

FREQUENTLY ASKED QUESTIONS

What is the brightness level of each SOLPEX 9936 Solar Pathway Light?

Each SOLPEX 9936 light emits 8 lumens of warm 3000K illumination, providing a soft yet effective glow for pathways, gardens, and driveways.

How long do the SOLPEX 9936 Solar Pathway Lights work after a full charge?

When fully charged with 6,8 hours of sunlight, the SOLPEX 9936 Solar Pathway Lights can illuminate your outdoor space for up to 8,10 hours at night.

What is the waterproof rating of the SOLPEX 9936 Solar Pathway Lights?

The SOLPEX 9936 lights are rated IP44, which means they are resistant to rain and small snowfalls, suitable for most typical outdoor conditions.

How do I install the SOLPEX 9936 Solar Pathway Lights properly?

To install, simply remove the isolator tab under the cap, then insert the stake into the ground. Its recommended to loosen the soil with a shovel beforehand to avoid damaging the stake.

What kind of battery is used in the SOLPEX 9936 Solar Pathway Lights?

Each SOLPEX 9936 light includes a pre-installed 1.2V AA Ni-MH rechargeable battery, designed for repeated solar charging cycles and long-lasting use.

What should I do if my SOLPEX 9936 Solar Pathway Lights arent turning on?

Ensure the isolator tab has been removed, the battery is properly seated, and the solar panel has received enough direct sunlight. Also, check if the lights are not covered or obstructed.

What should I do if the SOLPEX 9936 Solar Pathway Lights become loose in the ground?

If the lights become unstable, remove them and loosen the soil using a shovel before reinserting. This prevents bending or breaking the stake.

References

• User Manual