socket mobile DuraScan 600 Series NFC Reader Instructions
BATTERY REPLACEMENT INSTRUCTION
Step 1: Remove Battery Door
Use screw driver to loosen screw and remove battery door.
Step 2: Remove Battery
Use a flat head screw driver and place in the top right corner to gently push the battery out. Then, pull the connector to remove.
Step 3: Insert New Battery
Plug the connector on the new battery.
Step 4: Secure Battery Door
Ensure the battery door is properly placed, then screw the battery door back on.
Documents / Resources
|socket mobile DuraScan 600 Series NFC Reader [pdf] Instructions|
DuraScan 600 Series, 700 Series, DuraScan 600 Series NFC Reader, 600 Series NFC Reader