SOAR NCAA True Wireless Earbuds
Specifications
- BRAND: SOAR
- COLOR: Team Color
- CONNECTIVITY TECHNOLOGY: Bluetooth
- MODEL NAME: True Wireless Earbuds V.2
- FORM FACTOR: In-Ear
- BLUETOOTH: 5.0
- TALK TIME: 10 hours
- HEADPHONE TYPE: In-Ear
For the sports enthusiast in your life, the SOAR True Wireless Earbuds are ideal. Support your team with premium stereo sound without compromising on quality. Taking calls while on the go is a snap thanks to the built-in microphone. These headphones instantly pair with any Bluetooth-enabled device and maintain a connection for 30 feet. Since the portable charging case supports two full charges, you won’t have to worry about your headphones running out of juice while you’re out and about. a product with an NCAA license.
HOW TO PAIR
- The Notifications shade should be lowered.
- The Bluetooth icon is in the top row of icons; press and holds it.
- Make sure the toggle switch is turned on at the top of the menu.
- Tap to pair.
HOW TO TURN ON
- To turn the earphones off, place them in the charging case.
- Press and hold the Volume down button on the left earbud or the Multi-function button on the right earbud until the LED flashes green (on) or red to turn on or off each individual earpiece (off).
HOW TO SYNC
- Put an end to the “Wicked Driftr” Bluetooth settings on your smartphone.
- Your device’s Bluetooth setting should be disabled.
- Re-insert the charging case with the two earbuds inside.
- Take the headphones out of the charging case.
- Reactivate Bluetooth on your device.
HOW TO FIX BLUETOOTH PAIRING PROBLEMS
- Get rid of your smartphone’s “Wicked Driftr” Bluetooth settings.
- You should have Bluetooth turned off on your device.
- Put the two earbuds and charging case back inside.
- the charging case, then remove the headphones.
- Restart your device’s Bluetooth connection.
HOW TO CONNECT
- Put your headphones in pairing mode as a first step. Put your earbuds in pairing mode as a first step.
- On your phone, go to Bluetooth Settings.
- Look for new Bluetooth-enabled devices to scan for.
- Choose your device and connect in step 4…
- Play your preferred music in step five.
Frequently Asked Questions
Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
Turn off your Bluetooth and remove the earphones from their case to sync them. Press the buttons on top of the headphones twice quickly at once, and they should begin to pulse/breathe blue and begin blinking (looking for a device) Bluetooth settings should be set to Jam Ultra.Turn off your Bluetooth and remove the earphones from their case to sync them. Press the buttons on top of the headphones twice quickly at once, and they should begin to pulse/breathe blue and begin blinking (looking for a device) Bluetooth settings should be set to Jam Ultra.
Try twisting and taping the cord to restore sound if a single earbud periodically loses sound. If twisting the wire doesn’t work, you might have to open the earbud and, if you can, solder the connection. You might occasionally need to purchase new earbuds.
Examine the earphones’ battery indicator light to see how they are doing. When the earbuds are inserted, the case and earbuds will both charge at the same time. The case can be charged independently of the earbuds. Charged in red. Fully charged in green.
The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times.
Put the earphones in the charging case and click the power button on the case’s front to start charging them.
You must locate your speaker after selecting Bluetooth in the settings menu (there should be a list of devices you have connected previously). Hold down the Bluetooth key at the top until it starts up, then turn it on if you want to connect.
Restarting the headset is the first step to solving a Bluetooth earphone issue. If that still doesn’t fix the issue, try pairing and Bluetooth reset. If it doesn’t work, check the audio settings on your phone or computer. Otherwise, we believe your sound is the cause of the issue.
On the menu, select [Accessibility] by scrolling down. Tap [Hearing improvements] after that. A toggle switch for [Mono audio] will be visible. Make sure [Off] is selected on the toggle switch.
