ZOOM Handy Control and Sync

Specifications

• Product Name: ZOOM Handy Control & Sync for iOS/iPadOS
• Version: 1.0
• Manufacturer: ZOOM CORPORATION
• Compatibility: iOS/iPadOS devices

Product Usage Instructions

Installing ZOOM Handy Control & Sync:

1. Open the App Store on the iPhone/iPad and search for ZOOM Handy Control & Sync.
2. Tap GET on the ZOOM Handy Control & Sync screen to install the application.

Connecting with Recorders

1. Refer to the recorder manual to prepare it for Bluetooth connection.
2. Open the ZOOM Handy Control & Sync app on your iPhone/iPad.
3. In the app, tap the Bluetooth device list icon and select the recorder name/ID to connect.

Using Screens
The screens display various information such as elapsed time, recorder name, battery charge, signal strength, and more. You can also see level meters and file names.

Recording:

1. To start recording on all connected recorders simultaneously, tap the REC button.
2. To stop recording, tap the STOP button.

Changing Recorder Names:

1. Swipe left on the recorder display area.
2. Tap the edit icon.
3. Input the desired name and tap OK.

Disconnecting:

1. Swipe left on the display area of the recorder you want to disconnect.
2. Tap disconnect.

Setting the Date and Time:

1. Press the date and time setting button to synchronize all connected recorders with the iPhone/iPad’s date and time.

Introduction

• ZOOM Handy Control & Sync is a remote control application for ZOOM recorder products. An iPhone/iPad can be connected to multiple recorders and used to simultaneously start and stop recording, synchronize timecode, and set the date and time.
• Note that this manual does not explainthe operation of the recorders themselves. See the product operation manuals for detailed explanations about them.

Copyrights

• iPhone, iOS, iPad, and iPadOS are trademarks of Apple Inc.
• App Store is a service mark of Apple Inc.
• The Bluetooth® word mark and logo are registered trademarks of Bluetooth SIG, Inc., and these marks are used under license by Zoom Corporation.
• Product names, registered trademarks,s and company names in this document are the prop-erty of their respective companies s.All
• All‥trademarks‥and‥registered‥trademarks‥in‥this‥document‥are‥for‥identification‥purposes‥only and are not intended to infringe on the copyrights of their respective owners. Recording from copyrighted sources, including
• CDs, records, tapes, live performances, video works, and broadcasts, without permission of the copyright holder for any purpose other than personal use,ares prohibited by law. Zoom Corporation will not assume anyresponsibilityy related to infringements of copyrights.
• The illustrations and display screens in this document could differ from the actual product. The contents of this document and the specifications of the product could be changed without notice.

Installing ZOOM Handy Control & Sync

1. Open the App Store on the iPhone/iPad and search for “ZOOM Handy Control & Sync”.
2. Tap “GET” on the ZOOM Handy Control & Sync screen.

This will install ZOOM Handy Control & Sync.

Connecting with recorders

NOTE

• A BTA-1 or another dedicated wireless adapter (sold separately) must be installed in the recorder itself to remotely control it from an iPhone/iPad. See the operation manual of that recorder for details.
  1. Referring to the recorder manual, prepare it for Bluetooth connection.
  2. Tap the ZOOM Handy Control & Sync icon on the iPhone/iPad.
  3. Tap the icon.
• This opens a Bluetooth device list in ZOOM Handy Control & Sync. Tap the recorder name/ID to start connecting.
• When the connection completes, the status of the connected recorders will be shown.

NOTE

• If the connection is not successful, move the device closer to the recorder or move both to a place where nothing‥interferes‥with‥radio‥waves‥and‥start‥ZOOM‥Handy‥Control‥&‥Sync‥again.‥Confirm‥also‥that‥the‥Bluetooth function of the iPhone/iPad is enabled.
• A maximum of 10 recorders can be connected to the device.

Using screens

Recording

This will simultaneously start recording on all connected recorders.

NOTE

• Timecode data sent from the iPhone/iPad is added to recording files. This enables synchronization when editing afterward if multiple recorders are connected and used to record simultaneously.

Changing recorder names

1. Swipe left on the recorder display area.
2. Tap
3. Input the desired name and tap “OK”.NOTE
   • The following characters can be input.
     (space) ! # $ % & ‘ ( ) +  – 0 1 2 3 4 5 6 7 8 9 ;= @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { } ~
   • Up to 15 characters can be input.

Disconnecting

1. Swipe left on the display area on the recorder to be disconnected.
2. Tap
3. Tap “Disconnect” to disconnect the recorder.

Setting the date and time

1. PressThis will set all connected recorders to the same date and time as the iPhone/iPad.

ZOOM CORPORATION

• 4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
• zoomcorp.com

FAQs

Q: Can I connect multiple recorders to one iPhone/iPad?
A: Yes, you can connect multiple recorders to one iPhone/iPad using the ZOOM Handy Control & Sync app for remote control.

Q: Is it possible to edit recordings made with multiple connected recorders separately?
A: Yes, you can edit recordings made with multiple connected recorders separately after stopping the recording process.

Documents / Resources

ZOOM Handy Control and Sync [pdf] Instruction Manual Handy Control and Sync, Control and Sync, Sync

References

• User Manual