ZEBRA RTL10C1 Windows 11 Pro OS Recovery Package
Device Support
The products supported in this release: are RTL10C0, and RTL10C1 Please see Device compatibility details under the Addendum Section.
Known Constraints
“Wi-Fi roaming from DFS channel to non-DFS channel may take up to 4 seconds”
Software Packages
| Package Name | Description |
| L10AX-WIN11PRO-071823_Z01.2_AUTOINSTALLER.zip | Full Windows 11 Pro OS recovery image |
Version Information
Major Windows and product-specific component versions
| Component / Description | Version |
| Zebra OS Build Revision | 071823_Z01.2 |
| Windows 11 Professional OS Build | 10.0.22621 |
| Windows 11 Pro Feature Experience Pack | 22H2 |
| BIOS | BIOS flashing will occur if
BIOS <= LRA06 |
| Drivers | |
| Intel Chipset Driver (Tiger Lake) | 10.1.24.6/10.1.43.5 |
| Intel Dynamic Tuning Technology | 8.7.10700.22502 |
| Intel GNA Scoring Accelerator module | 03.00.00.1457 |
| Intel HID Event Filter | 2.2.1.386 |
| Intel Integrated Sensor Solution | 3.1.0.4477 |
| Intel Management Engine Interface | 2251.4.2.0 |
| Intel Serial IO (GPIO, I2C, SPI, UART) | 30.100.2129.8 |
| Intel Smart Sound Technology | 10.29.0.8102 |
| Intel Wireless Bluetooth | 22.200.0.2 |
| Intel Wi-Fi 6E AX210 160 MHz | 22.220.0.4 |
| Intel Ethernet Connection I219-M | 12.19.2.45 |
| Intel Iris Xe Graphics | 31.0.101.4502 |
| Intel TGL AVStream Camera (IPU) | 60.22000.6.6634 |
| Intel Rear Camera Sensor AR1337 | 60.22000.6634.2 |
| Button Driver | 4.7.0.2 |
| Intel NxpNfcClient Driver | 12.0.6.0 |
| Quectel PCI Express (if RM505-5G WWAN present)
WWAN Carrier Firmware:
· Default: RM505QAEAAR11A03M4G_03.004 · Verizon: RM505QAEAAR11A04M4G_03.001 Quectel PCI Express Generic Mobile Broadband Adapter Quectel Wireless Location Sensor Quectel QMUX Interconnect Quectel UDE Device HighSpeed USB Composite Device(UDE) |
2.0.0.8(pkg)
1.0.0.13 (inbox) 1.0.0.4 1.0.0.6 1.0.0.13 30.0.0.0 |
| Thunderbolt HSA Component | 1.41.1353.0 |
| Synaptics Fingerprint Reader | 6.0.10.1122 |
| Dock -> ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter | INBOX |
| Utilities/Applications | |
| O2Micro OZ776 SCR Driver (if CAC present) | 2.11.4.256 |
| (DOCK) DisplayLink Graphics Driver | 11.0.2412.0 |
| (DOCK) PL-2303 USB-to-Serial | 2.0.2 |
| Realtek High-Definition Audio Driver – ALC888 | 6.0.9244.1 |
| Realtek Hardware Support Application | 11.0.6000.256 |
| Realtek Audio Effects Component | 11.0.6000.968 |
| Realtek Audio Universal Service | 1.0.0.438 |
| Touch Mode | 1.3.0 |
| xKnowTab (Know Your Tablet) | 3.6.5 |
| xSysMon (System Monitor) | 02.02.0005 |
| Zebra Technologies E-Label | 1.0.6 |
| Zebra Scanner Driver (if the scanner is present) | 3.07.0008 |
Usage Notes
To apply the image:
Creating Installation USB Stick Follow these steps to create a bootable installation USB stick. This is critical: Only the FAT32 format is recognized by the tablet BIOS for the steps below.
Note: Use a 16GB stick or larger.
- Insert USB stick to Windows PC.
- From Windows Explorer right-click USB stick and Format to FAT32.
- Rename the stick as “BOOTME” by clicking in Explorer and renaming.
- Download the OS image zip file, extract the contents into a folder and copy the entire contents of this folder to the root of the formatted installation USB stick.
NOTE: Make sure the image is downloaded completely. Check the size of the downloaded image versus the image posted on the Support Central at Zebra.com. Partial downloads may corrupt the device. - Attach installation USB stick to tablet USB port/USB hub.
- Attach AC power.
- Power on the tablet, at the BIOS splash screen, and tap touch screen or F12 to access the BIOS boot menu.
- At the BIOS boot menu select to boot to the inserted USB device.
- Installation automation will load the recovery image files.
- When imaging is complete, remove the USB stick and the device will shut down.
- To complete the installation, power on the device, and the system will reboot several times and then shut down.
- Power on the system to begin the Out of Box Experience phase of the Windows Installation.
New Features
- Initial release
Resolved Issues
- Initial release
Important Links
- Zebra Techdocs
- Developer Portal
Addendum
Device Compatibility
This software release has been approved for use on the following devices.
| L10ax Model | Part Numbers | Device-Specific Manuals and Guides |
| RTL10C0 | RTL10C0-0A11X1P RTL10C0-0A11X1X RTL10C0-0A12X1X RTL10C0-0A13X1X RTL10C0-0A31X1X RTL10C0-0A32X1X RTL10C0-0C11X1X RTL10C0-0C12X1X RTL10C0-0C32X1X RTL10C0-0C41X1X RTL10C0-0C42X1X RTL10C0-0C12X1P RTL10C0-0A42X1X RTL10C0-0C22X1X-01 | RTL10C0-0C13X1X RTL10C0-0C42X1X-01 RTL10C0-0C11X1X-02 RTL10C0-0C31X1X RTL10C0-0A11S1X RTL10C0-0A11X0X RTL10C0-0A11X1X-01 RTL10C0-0A12X0X RTL10C0-0A22X1X RTL10C0-0A41X1X RTL10C0-0C22X1X RTL10C0-0A33X1X RTL10C0-0C12S1X | L10ax Support Page |
| RTL10C1 | RTL10C1-3A11X1P RTL10C1-3A11X1X RTL10C1-3A12S1X RTL10C1-3A12X1P RTL10C1-3A12X1X RTL10C1-3A22X1X RTL10C1-3A23X1P RTL10C1-3A23X1X RTL10C1-3A31X1P RTL10C1-3A31X1X
RTL10C1-3A32X1X |
RTL10C1-3A33X1X RTL10C1-3A41X1X RTL10C1-3A42X1X RTL10C1-3A43X1X RTL10C1-3C11X1X RTL10C1-3C12X1X RTL10C1-3C22X1P RTL10C1-3C32X1X RTL10C1-3C33X1X RTL10C1-3C41X1X
RTL10C1-3C43X1X |
Revision History
|
Rev |
Description |
Date |
| 1.0 | Initial revision | October 16, 2023 |
Documents / Resources
 |
ZEBRA RTL10C1 Windows 11 Pro OS Recovery Package [pdf] User Manual RTL10C1 Windows 11 Pro OS Recovery Package, Windows 11 Pro OS Recovery Package, Pro OS Recovery Package, Recovery Package, Package |