YHDC SCT006L Split Core Current Transformer Owner’s Manual
Characteristics
Safety lock buckle, easy installation, cable output.
Technical index
- Mounting type: Free hanging (In-Line)
- Material of core: Ferrite
- Applicable standards: GB20840-2014
- Operating temperature: -25℃ ~ +60℃
- Storage temperature: -30℃ ~ +90℃
- Frequency range: 50Hz-1KHz
- Waterproof grade: IP00
- Dielectric strength: Input (bare conductor)/Output AC 800V/1min 50Hz
- Output/housing AC 3.5KV/1min 50Hz
Electrical parameters: The following parameters are typical values. The actual values shall be subject to the actual measurement of the product
| Rated input | 1 | 5 | 10 | 20 | A | |||||
| Rated output | 1 | 2.5 | 5 | 10 | 5 | 10 | 20 | 20 | 25 | mA |
| Turns ratio | 1:1000 | 1:2000 | 1:1000 | 1:500 | 1:2000 | 1:1000 | 1:500 | 1:1000 | 1:800 | – |
| Sampling resistance | 5 | 10 | 5 | 5 | 10 | 5 | 5 | 5 | 5 | 0 |
| Accuracy | 1 | % | ||||||||
| Weight | 25 | g | ||||||||
Specifications of cable:
2 x 0.2mm² two core sheathed wire.
The length of cable: 100cm~105cm
TVS: Transient Voltage Suppressor (7.5V)
Current output type
Secondary is not allowed to open circuit
Dimensions (in:mm±0.5)
Front view
Side view
Documents / Resources
 |
YHDC SCT006L Split Core Current Transformer [pdf] Owner's Manual SCT006L Split Core Current Transformer, SCT006L, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer |
