Yale Access App
INSTRUCTION
- Download the Yale Access App
- Tip: Have an August account?
- Log in using your existing username and password.
- Tip: Have an August account?
- Tap ‘Set Up A Device’
-
- Scan the Yale Access QR code located inside the lock’s battery compartment, or found below
- Scan the Yale Access QR code located inside the lock’s battery compartment, or found below
-
- Install the Lock
- Using the app is a requirement for this step. The app will guide you through step-by-step installation instructions
- Using the app is a requirement for this step. The app will guide you through step-by-step installation instructions
- If You Have a Smart Module
- Insert the module into the slot above the batteries and follow the installation steps in the app.
- Insert the module into the slot above the batteries and follow the installation steps in the app.
Tip:
- Once your lock is installed, insert batteries as the last step
- If you have a Bluetooth lock with no Smart Module you can always add one!
Visit ShopYaleHome.com/SmartModule
We’re Here to Help, 24/7!
Documents / Resources
 |
Yale Yale Access App [pdf] User Guide Yale Access, App, Yale Access App |
 |
Yale Yale Access App [pdf] User Guide Yale Access App, Yale Access, App |
