YABER V6 Projector 5G WiFi Bluetooth Projector

 

YABER Lifetime Professional Support

Dear customer, Thank you very much for supporting YABER! any issues, email your order number and the r OT you have servicel@yabertech.com. We il provide a fast solution in 24 hours. Please read this manual thoroughly before using the projector. If you have Actually, many problems can be easily solved by setting, such as no signal no sound, Bluetooth connection failed, WiFi connection failed, dark spots, choppy animation, etc. We promise al the projectors have been 100% carefully checked and packaged before shipping. f you have any questions, could you please contact us so that the problem can be solved? And give us an opportunity to improve. we guarantee we will provide you a satisfactory solution.
Thanks for your understanding! YABER Service Team

TIPS

1. Do not place the projector in too warm or too-cold room, because the high temperature or low temperature will shorten the lifespan of the device. The Working environment would be 5C-35C better.
2. If there are black spots on the projection screen, please don’t worry, please contact service@yabertech.com via email, and we can send you a video about how to remove the dust.
3. The ventilation is equipped for the projector to work stably. Don’t cover the vent with cloth, a blanket, or other things. Don’t insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
5. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with a soft cotton cloth for the glass lens Surface. Hard doth or abrasives shall not be used.

PACKAGE LIST

YABER V6 Projector*1	Remote Control*1	Power Cord*1
HDMI Cable*1	3-in-1 AV Cable	Lens Cover*1
Cleaning Cloth*1	User Manual*1

PROJECTOR SPECIFICATIONS

Model No. V6
Native Resolution	1920*1080P	Keystone Correction	Manual Vertical & Horizontal
Display Technology	LCD	Light Source	LED
Color Game	16.7M Full	Aspect Ratio	4:3/16:9
Recommended Projection Distance	8.8-10.Sft	Minimum   Projection Distance	5.5ft
Power Voltage	AC100-240V	Projector Weight	4.7Ib
Picture File	JPG/JPEG/ BMP/PNG	Interfaces	HDMl*2/USB*2/3.5mm Headphone jack/AV
Projection Method	Front/Rear on Desk, Front/ Rear on Ceiling
Video File	3GP/AVI/FLV/MP4/MPGNOB/TS/M2TS/DAT/MKV
Audio File	MP3/APE/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A

PROJECTOR OVERVIEW

1/18	Height Adjustment Screw	Adjust the height of the projector
2/5	IRWindow	Infrared signal receiver
3	Projector lens	Optical coated glass lens
4	Power Cord Port	Power Cord Port
6	Headphone Jack	3.5mm Headphone Output
7/10	HDMI Ports	HDMI 1 input/ HDMI 2 input
8	USB Ports	USB 1 port/ USB 2 port
9	AVPor	Audio input
11	Speakers	Speakers stereo 5w
12	Vents	Prevent the projector from overheating
13	Focus Ring	Adjust the focus ring to get the clearest image
14	Detachable Dust Filter Switch	Push the switch from the right to open the detachable dust filter
15	Detachable Dust Filter	Clean the dust (if the screen has a black spot)
16	Bottom label	Nameplate on the bottom of the projector
17	Rubber Pads	Protective pads/remove to install ceiling mount

1. Power Key
2. Back
3. OK Key
4. Up Key
5. Down Key
6. Left Key
7. Righi Key

	Power	Turn on/off the power
2	Back	Return to the previous menu
3	OK	Confirm the option
4/5/6/7	Arrow Keys	Used to adjust the parameter of the projector in the menu mode

REMOTE CONTROL

1. Power
2. Source
3. Arrow keys
4. Menu
5. Homepage
6. Volume+
7. Volume-
8. Mute
9. Picture flip
10. Confirmation key (Play and Pause)
11. Return
12. Previous
13. Next

Note

1. Install 2 pieces of AAA batteries into the remote before using it. Do not combine new batteries with old ones in the remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at the infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out the batteries to prevent battery leakage.

INSTALLATION.

1. Installation Method The projector can be hanged on the ceiling with a special hanger frame, and placed on the table desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with the following methods:
   Keep the projector at a height where its lens is axial symmetry to the screen. f this is not possible, use the keystone correction function to adjust the projection image. If you want to get a free projection screen. please contact us via service@yabertech.com

    

   Aspect Ratio: 16:9
   Distance (ft.}	Screen Size
   5.50	50″
   7.80	70″
   10.8	100″
   13.0	120″
   16.4	150″

   The recommended projection distance is about 10.8ft,the shortest projection distance is 5.5ft.
   The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

2. install on the Ceiling
   

    

   • Please purchase an universal projector ceiling mount;
   • Remove the four rubber pads on the bottom of the projector, you will see the screw holes and use the M5*11 mm screws for installing the ceiling, and then install it.

STARTING PROJECTOR

1. Press the power key on the remote or projector, the indicator light will turn blue;
2. Adjust the focus ring on the left side of the projector to get the best image performance; (If it is still blurry, please try to adjust the projection distance.)
3. Use the 4D keystone function of the projector to get a rectangle projection screen;
4. Connect the external device (Smartphone, iPad, Amazon Fire TV, TV box, DVD player, Computer, etc.) in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal;.
5. Select the” @ “menu. enter the [ Other Setting],then you can select the option [ Language Setting ] to set your preferred language.

IMAGE ADJUSTMENT

When using the projector for the first time, ii normally displays an unclear image. This is due to the lens being out of focus or the incorrect trapezoid setting.
Please follow the below steps to correct:

1. Focus Adjustment
   Rotate the focus ring or lens slowly. At the same time, check the focus point carefully. The best focus point for the lens would be where the image most clear.
   Note: If it is still blurry, please try to adjust the projection distance.
2. Digital 4D Keystone Correction.
   Use the digital 4d keystone correction of the projector to change the image to be rectangular (vertical and horizontal). Detail please refer the page 16 of this manual.

SETTING UP THE PROJECTOR

The projector’s home page is as follows.

1. Select The Input Signal Source
   Select the desired input signal source (HDMI1/HDMI2/AV) on the home-page
2. USB Disk Input Mode
   Play Movie/Music/Photo/Office Suite in the USB Disk Input Mode

    

   1. input the USB Disk, select [ USB] on the homepage and enter;
   2. Select the option [ Movie/Music/Photo/Office Suite]
   3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.
      Play Interface
      

       

      Menu	Content	Mode	Function
      Picture Mode	User/StandardNivid/Soft	Brightness	Modify the picture parameters in the range 0-100
      		Contrast
      		Saturation
      		Sharpness
      Sound Mode	User/Standard/News/ Music/Sport	120Hz	Modify the sound parameters in the range 0-100
      		500Hz
      		1.5KHz
      		5KHz
      		10KHz

      0ffice Suite Play Interface
      By pressing the button on the remote to enter the menus. (Note: the Office version may be automaticaly updated, then the updated functions may change. Due to copyright, some functions are temporarily unavailable. Please refer to the actual version.)

WiFi Setting

Wireless Connection
Warming Tips

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using a wireless connection. A distance of 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility. Any questions, please feel free to email YABER via service@yabertech.com

i0S Cast (for iOS Devices)

1. Go to home page – Select the [ ] menu – Select the [ WIFi Seting ] menu -Open the WiFi function– Select your home WiFi from the list- Connect the v6 projector to your home WiFi.
2. Back to home page — Select [ iOS Cast] menu- Press the OK button to enter the [ iOS Cast ] menu.
3. .Select the [ Settings ] menu on your iOS device- Turn on the [ Wi-Fi function — Connect your iOS device to the same home network as the projector.
4. 0pen the [ Control Center ] on your iOS device – Select the [ Screen Mirroring ] function- Select and connect the iOs Cast receiver named [ V6-IOSCastxx]- your iOs device screen wil be displayed on the projection screen after 3 seconds.

Miracast (for Android Devices)

1. Go to the home page – Select the [ Miracast ] menu — Press the OK button to enter the [ Miracast Setting] Menu.
2. Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ] function – Select your Miracast receiver named [ V6-AnCast-XXXX ] — your Android device screen will be displayed on the projection screen after 3 seconds.
3. On your Android device, tap [Settings] -[ WLAN Display] -Turn [ Wi-Fi] ON, Connect your home WiFi.
   Note

    

   1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’s manual. [ Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc. ]
   2. Not all Android phones support this function. Please make sure it is support­ed before use.
4. Bluetooth Setting
   Go to home page — Select the [ @ ] menu — Select the [ Bluetooth Setting ] Option — Open the Bluetooth function and your Bluetooth device — Scan the Bluetooth devices nearby automatically — Choose the Bluetooth device desired — it will be paired and connected automatically.
   Note

    

   1. The V6 projector is compatible with Bluetooth headsets, Bluetooth speakers and Airpods, but not Bluetooth keyboards or Bluetooth phones.
   2. lf you have any questions, please feel free to email YABER via support@y­abertech.com

Projector Image Setting

Projection Mode

Keystone Advanced & 4-Point Keystone
Vertical Keystone Correction

1. Select the [ Front] option in the [ Keystone Advanced] menu, then press the button to enter the [ Manual Keystone] menu.
2. If the projection image shows as (1 ), press the button on the remote or projector to increase the vertical parameter (-50~0), until to achieve the projection image (2).
3. If the projection image shows as (3), then press the button on the remote or projector, and decrease the vertical parameter (0-50), until to achieve the projection image (4).

Horizontal & Vertical Keystone Correction
When the projection screen is not rectangular, it can be adjusted by a 4-point keystone correction.

1. Select the [ Side ] option in the [ Keystone Advanced ] menu;
2. Press the button to select the [ 4-Point Keystone ] menu, then press the [ OK ] bottom to enter the submenu.
3. Keep pressing the OK button on the remote control or projector to select the point.
4. Press the arrow keys on the remote or projector to adjust the horizontal or vertical parameters, until the projection screen becomes the desired rectangle.
   Keep pressing the OK button on the remote control or projector, until the positioning icon appears at the point desired, then release the button immediately.
   Press the arrow keys on the remote control or projector to adjust the horizontal or vertical parameters.
   Press the key on the remote control to back to the home page.
   Press the keys on the remote control to restore the original parameters.

Digital Zoom

1. Select the [ Digital Zoom ] option and press the OK button to enter the submenu.
2. By pressing the button on the remote or projector, you can reduce the height and width of projection size up to 50%.

System Update

Menu	Function
Online Update	Online update
Local Update	Local update
Restore Factory	Restore user operation application configuration and system setting

Other Setting

Menu	Function
Power On Option	Direct/Standby
Language Setting	Setup the language
Scheduled Shutdown	10min/20min/30min/60min/120min

About the Direct/Standby Power On Option
Direct Mode: When the projector is powered on, the projector will be automatically turned on.
Standby Mode: When the projector is powered on, you need to press the(‘.) button on the remote or projector to turn on the projector.

ABOUT

Menu	Content
System Version	V1.0.0.0.2020-08-27
MAC Addressr	Ac:5d:5c:c5:d9:83

SIGNAL LINES CONNECTION 
YABER V6 projector has 6 interfaces, HDMI ports*2/USB ports*2/3.5mm headphone output/AV output. Please select the correct connecting port to connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)

Connect USB Disk

1. Insert the U disk into either of the two usb input ports;
2. You can directly enter the start-up screen on the home page, select the option [ Movie/Music/Photo/Office Suite]
3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ] button to play it.

Connect the Devices via the HDMI ports

1. Connect your TV stick or laptop to any HDMI port of the projector;
2. Enter the home page to select the corresponding HDMl1 or HDMl2 as the signal source.

Connect to the DVD Player
Use the 3-in -1 AV cable in the package

1. Turn on your DVD player and the projector;
2. Connect the colorful female connectors to your DVD player’s RCA cable with the 3-in-1 AV cable in the package;
3. Connect the black connector to the AV port of the projector, enter the home page to select [AV] as the signal source.

Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows, enter the home page to select [AV] as the signal source.

SAFE SHUTDOWN

1. Press the CJ button on the projector or remote.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.

WARRANTY

Thank you so much for your purchase and support! We provide 3-year warranty for V6 projector. If you have any questions, please feel free to contact us via Support@yabertech.com.

TROUBLESHOOTING

Problems listed below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do troubleshooting.

1. When turning on the power switch, the indicator light does not work.
   • The power might not be connected well.
   • Check the over-heat protection system.
2. The remote control does not communicate with the projector.
   • The power switch at the back of the projector is turned on or off?
   • The remote control’s batteries are depleted?
   • Something obstructing the signal between the remote and IR
   • Strong light on IR directly.
3. No image on the screen.
   • Is the channel set-up correct?
   • Is there an input signal ?
   • Is the input cable plugged well ?
   • Under PC mode, is the refresh rate> 75KHz?
4. Blue screen,no picture,no sound.
   Input cables connected right?
5. Picture right, no sound.
   • Input cables connected right?
   • Volume at min or on Mute.
6. Can’t play the movies.
   • The format of the video is right?
   • Files are broken?
   • Device is broken?
7. There is picture, no sound?
   The decode system doesn’t match.
8. Can’t find devices when connected with hard drive or flash drive.
   Check if the device is broken.
9. Auto-off after working for a while.
   • The projector ventilation is blocked.
   • The voltage is not stable.
   • The over-heat protection system.

FAQS

VIDEO

References

• User Manual