INVADER Mid-Tower Gaming Case
User Guide

INVADER Mid-Tower Gaming Case

ADATA Technology Co., Ltd.
2F, No. 258, Liancheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Product Name: XPG INVADER
Package Content

1. INVADER Chassis
2. INVADER Quick Installation Guide
3. Warranty Guide
4. Accessory Box

Accessory box

Figure	Parts Name	Used for	Q’ty
	Screw T5*10mm	Case Fan	20
	Screw #6-32*6mm	Power Supply Unit	8
	Screw M3*6mm	2.5″HDD	16
	Screw #6-32*6mm	Motherboard, 3.5″ HDD	17
	Movable Tie	Cable Management	4
	Power Supply Unit Rear Holder	Power Supply Unit	1

XPG INVADER MID-TOWER PC CHASSIS

A Magnetic Front Panel
B Magnetic Dust Filter
C Side Glass Panel
D 2x 120mm Fans Included
E 2.5” HDD/SSD Bracket
F PSU Bracket

Chassis I/O Port:

	Power Button
	Reset Button
	ARGB Lighting Toggle Button
	Hybrid Audio Port
	USB Ports

Side Panel

Tempered Glass Side Panel and Front Bezel

Removing Tempered Glass Side Panel
Removing Front Bezel

Dust Filter

Drive Mounts

2.5” Drive Installation:
2.5” Drive Installation:
3.5” Drive Installation:

PSU Mounts

PSU Installation:

Fan Mounts

Rear 120mm Fan Mount:
Front 120mm Fan Mounts:
Side 120mm Fan Mounts:
Top 120mm Fan Mounts:

PCI-E Slot Installation

Leads Installation Guide
Please consult the user manual of your motherboard manufacturer, then connect these leads to the panel header on the motherboard.
USB 3.0 Connection: Please consult your motherboard manual to find out a section of the USB 3.0 connection.
Audio Connection: Please refer to the motherboard installation to connect the Audio Connector to avoid the device error and causing the motherboard sound device to be damaged.

PRESS THE LIGHTING TOGGLE BUTTON	RGB EFFECT	ARGB EFFECT
Mode 1	Red
Mode 2	Green
Mode 3	Blue
Mode 4	Purple
Mode 5	Yellow
Mode 6	White
Mode 7	Orange
Mode 8	Green
Mode 9	Four different color breathing modes	Four different color rainbow mode
Mode 10
Mode 11
Mode 12
Mode 13	OFF
Long Press	Enter/ exit music mode

Specifications

Dimension (H*W*D)	470*206*482mm (18.74*8.11*18.97 inch)
Form Factor	Mini-ITX, Micro-ATX, ATX
Side Panel	4mm Tempered Glass*1(Left Side)
Color	Exterior & Interior : Black / White
Material	SPCC
3.5″ HDD/HDD tray	2
2.5″ HDD/SSD tray	2+2(Combo 3.5”/2.5”)
IO Port	USB 3.0 * 2 , Audio*1 HD Audio ( Mic & SW ) * 1 , LED Control * 1
Fan Support	Front: 3*120mm ,  2*140mm     Top: 2*120mm Rear: 1*120mm     Bottom ：1*120mm     Right Side : 2*120mm
Radiator Support	Front:360/240mm     Top:240mm Right Side : 1*240mm     Rear:120mm
Clearance	CPU Cooler Height Limitation: 170mm Graphic Card Length Height Limitation: 400mm PSU Height Limitation: 225mm

CLEANING INSTRUCTIONS
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its integrity.
SAFETY INSTRUCTIONS
For the proper use of the product, and to ensure your safety, please follow the following instructions:

1. Keep the device away from liquids, excess humidity, or moisture to avoid any shock hazards. Should the device come into contact with liquids, please make sure to unplug the device immediately, store it in a dry place, and contact support for assistance.
2. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
3. Should you have any other trouble operating the device properly and normal troubleshooting does not work, please unplug the device and contact our service for support.
4. Do not attempt to service or fix the device by yourself at any time.

DURATION OF WARRANTY
ADATA Technology Co., Ltd. provides a two-year warranty period for this product unless regional laws and regulations state otherwise.
LIMITATION OF WARRANTY
This limited warranty covers only repairs or replacements of products manufactured by ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for the following reasons:

1. The warranty label is altered, damaged, or missing.
2. The product serial number does not conform to our original system.
3. Products purchased from an unauthorized agent.
4. Damage caused by natural calamity
5. Any abuse outside the intended product operation.

ONLINE CUSTOMER SERVICE
For frequently asked questions, additional information, and service instruction please visit the product page at www.xpg.com

Documents / Resources

XPG INVADER Mid-Tower Gaming Case [pdf] User Guide INVADER Mid-Tower Gaming Case, INVADER, Mid-Tower Gaming Case, Gaming Case, Case

References

• User Manual