Product Specifications
- Model: 1211-080, 1211-081 Lighted Exit Buttons
- Power: 12-Volt DC
- Dimensions: 2.75″ x 2.50″ x 1.50″
- Weight: 2.50 oz
- Mounting: Wall mount
Product Usage Instructions
- Choose a suitable location near the exit.
- Connect the exit button to a 12-Volt DC power source.
- Securely mount the button on the wall using appropriate screws or adhesive.
- Press the button firmly to activate the light.
- The illuminated “EXIT” sign will indicate the exit route.
- Release the button to turn off the light.
Control Stations
Gate Control Stations
CONTROL STATIONS PROVIDE MANUAL CONTROL FOR A SINGLE DOOR OR SINGLE GATE CONTROL REQUIREMENTS
CONTROL STATIONS – INTERIOR
- Controls mount into a single-gang electrical box (except 1211-081)
- 1211-081 exit button is mullion mounted
- Stainless steel faceplates
- Key switch uses a mortise cylinder that can be re-keyed
CONTROL STATIONS – DOOR/GATE
- Open – Close – Stop indoor and outdoor control Stations
- Manual gate controller provides normal, momentary open, or hold open operation
RESIDENTIAL
- APARTMENT COMPLEX/GATED COMMUNITIES
- APARTMENT/COLLEGE RESIDENTIAL HALLS
- MIXED USE BUILDINGS
- COMMERCIAL/INDUSTRIAL
- MAXIMUM SECURITY
- SELF-STORAGE
- PARKING
- Mounts Anywhere
- 1211-016 3-button gate controller is weather resistant for exterior mounting
- Slim Design
- allows the 1211-081 exit button to be mounted into the door jam
- Construction
- Ready for easy wall installation
- Manual Control
- for easy access at guarded entries
DEIMENSION
TECHNICAL FEATURES
INTERIOR CONTROL STATIONS
Models
1211-080 exit button
- Provides a release device for doors secured with a magnetic lock or electric strike
- Lighted Exit push buttons
- Requires 12-VDC power to illuminate the exit button.
- Stainless steel faceplate
1211-081 exit button
- Stainless steel faceplate
- Requires 12-VDC power to illuminate the exit button
- Indoor use only
1206-080 mortise cylinder keyswitch
- Momentary contact
- Mortise cylinder can be re-keyed to match existing locks
- N.O. or N.C. operation
- Indoor use only
Features: All interior controls are designed to mount into a single-gang electrical box except the model 1211-081 exit button, which is designed for mullion mounting. All interior Controls are designed to control a single door/gate onl.y Operating Temperature: -10°F to 145°F (-23°C to 62°C)
DOOR/GATE OPERATOR
CONTROL STATIONS
Models
1200-006 3-button1
- Ideal for exterior applications, and interior too
- Can be surface or post-mounted
- OPEN – CLOSE – STOP control
- Operates with DKS models 6050, 6100, and 6300 only
1200-007 3-button interior1
- Provides manual control of automated vehicular gates for interior use only
- OPEN – CLOSE – STOP control
- Operates with DKS models 6050, 6100, and 6300 only
1200-016 3-button2
- Ideal for exterior applications, and interior too
- Can be surface mounted
- NC Stop circuit
- OPEN – CLOSE – STOP control
- Can be used with most door and gate operators
1200-017 gate control toggle
- 3-position control switch for automated vehicular gates, interior use only
- The center position is neutral for normal operation
- The down position is a momentary contact to open a gate
- The up position is toggled to hold a gate open
- Can be used with most gate operators
- Can only be used with DKS models 6050, 6100, and 6300.
- Do not use with DKS 6060, 6100, or 6300 model operators.
Features: All interior controls are designed to mount into a single-gang electrical box. (1211-081 isa mullion mount) Designed to control a single gate only. Operating Temperature: -10°F to 145°F (-23°C to 62°C)
MEMBER:
CONTACT
- 120 S. Glasgow Avenue,
- Inglewood, California 90301 U.S.A.
- Tel: 310-645-0023 FAX: 310-641-1586
- www.doorking.com
2022 All Rights Reserved. Product specifications may change without notice. Rev. 2/22
FAQ
- Q: Can the exit buttons be used outdoors?
- A: It is recommended to use these exit buttons indoors or in areas protected from direct exposure to harsh elements for optimal performance and longevity.
- Q: Are these buttons compatible with all types of door systems?
- A: These buttons are compatible with most standard door systems that operate on a 12-Volt DC power supply.
Documents / Resources
 |
WOKS DOORKING 1211-081 Lighted Exit Buttons [pdf] Instructions 1211-080, 1211-081, 1211-081 Lighted Exit Buttons, 1211-081, Lighted Exit Buttons, Exit Buttons |