WINWING - LogoPTO2
User Manual V1.0 2023.08WINWING PTO2 Panel of Take Off Controller

Contents in the box

WINWING PTO2 Panel of Take Off Controller - box

1 PTO2(1#) 1
2 Mounting Bracket – Left(2#) 1
3 Mounting Bracket – Right(3#) 1
4 Data Cable(4#) 1
5 Nanometer Double Sided Adhesive Dots(5#) 1
6 Accessories Kit(6#~9#) 1
7 Tools Kit(T1、T2) 1

Parameters

1.1. Performance Parameters

WINWING PTO2 Panel of Take Off Controller - Parameters

The handle has a total travel of 50 degrees and features a midpoint scale.
At both ends of the travel, the handle is in a locked state and needs to be pulled up during operation.

WINWING PTO2 Panel of Take Off Controller - Parameters 1

The handle has a total travel of 50 degrees and features a midpoint scale.
At both ends of the travel, the handle is in a locked state and needs to be pulled up during operation.

WINWING PTO2 Panel of Take Off Controller - Parameters 2

WINWING PTO2 Panel of Take Off Controller - Parameters 3

1.2. Applicable Models /
1.3. Dimensions

WINWING PTO2 Panel of Take Off Controller - Dimensions

1.4. Installation Dimensions

WINWING PTO2 Panel of Take Off Controller - Dimensions 1

Function

2.1. Mechanical/Special Functions
2.2. Buttons

WINWING PTO2 Panel of Take Off Controller - Buttons

WINWING PTO2 Panel of Take Off Controller - Buttons 1

2.3. Adjustment Methods
Assembly of Components

Installation Methods

4.1. Bracket Mounting

  1. Installing at an angle of 51 degrees from the desktopWINWING PTO2 Panel of Take Off Controller - Bracket MountingAm Hole MountingWINWING PTO2 Panel of Take Off Controller - Bracket Mounting 1Al Hole MountingWINWING PTO2 Panel of Take Off Controller - Bracket Mounting 2* Tighten the screw until there is no shaking; excessive tightening may cause damage.
    * Unused holes on the bracket can be used for installing cable clips.
  2. Installing at an angle of 16 degrees from the desktopWINWING PTO2 Panel of Take Off Controller - Bracket Mounting 3*Only demonstrate the installation method using the Am hole, the rest are identical.WINWING PTO2 Panel of Take Off Controller - Bracket Mounting 4
  3. Installing with Clamp Bracket
    *Clamp brackets and related accessories need to be purchased separately.
    *Offering installation methods for the following combinations:WINWING PTO2 Panel of Take Off Controller - Bracket Mounting 5This manual demonstrates one installation method (Z1+B), and the rest are identical.WINWING PTO2 Panel of Take Off Controller - Bracket Mounting 6

4.2. Gaming Seat Mounting
4.3. Cockpit Mounting
4.4. Cascading
Content may be updated without prior notice.

Chengdu WINWING Tech Co., LTD
WWW.WINWING.CN
INFO@WINWING.CN
High-tech International Enterprise Zone No.19 Building,Changshengqiao Road
1111#, Pidu District, Chengdu,China 610000

Documents / Resources

WINWING PTO2 Panel of Take Off Controller [pdf] User Manual
PTO2 Panel of Take Off Controller, PTO2, Panel of Take Off Controller, Take Off Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *