MRT313 Thermopile Temperature Sensor
User Manual
MRT313 Thermopile Temperature Sensor
Thermopile Temperature Sensor
(Model: MRT313)
Version: 3.0
Valid from: 2022-11
Statement
This manual copyright belongs to Zhengzhou Wines Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways.
Thanks for purchasing our product. In order to let customers use it better and reduce the faults caused by misuse, please read the manual carefully and operate it correctly in accordance with the instructions. If users disobey the terms or remove, disassemble, change the components inside of the sensor, we shall not be responsible for the loss.
The specific such as color, appearance, sizes &etc, please in kind prevail.
We are devoting ourselves to products development and technical innovation, so we reserve the right to improve the products without notice. Please confirm it is the valid version before using this manual. At the same time, users’ comments on optimized using way are welcome.
Please keep the manual properly, in order to get help if you have questions during the usage in the future.
MRT313 Thermopile Temperature Sensor
Product Description:
MRT-313 is an infrared thermopile temperature sensor, direct contact is not required when measuring object temperature. The core component thermopile chip is formed by connecting hundreds of thermocouples in series based on MEMS technology. The thermopile absorbs the infrared energy emitted from the measured object, and uses the Setback theory, the sensor outputs the corresponding voltage to detect the temperature of the target.
Features
- TO-39 metal package
- Specific perspective
- Quick response
- Good stability
- High precision NTC
Applications
- Household appliances (Microwave oven, hair dryers, range hood etc), temperature measuring and controlling
- Non-contact temperature measuring
- Continuous temperature control of production process
- Human presence detection
- Power industry temperature monitoring;
Technical parameters
Parameter | Value | Unit | Remarks |
Sensitive area | 1×1 | mm | / |
Field of view | 60 | Degree | Above 50% |
Thermopile resistor | 75±15 | KO | 25°C |
Noise voltage | 38 | nV/Hz112 | 25°C |
Noise equivalent power | 0.23 | nW/Hz1/2 | 500K, 1Hz, 25°C |
Response rate | 110±30 | V/W | 500K, 1Hz, 25°C |
Temperature coefficient of resistance | 0.06 | %/°C | 25°C 75°C |
Time constant | ≤ 20 | ms | |
Detection rate | 1.2 x108 | cmHz1/2/W | 500K, 1Hz, 25°C |
NTC resistance | 100 ± 1% | KO | 25°C |
B-value constant | 3950 ± 1% | / | 25°C/50°C |
Working temperature | -30 ∼ 100 | °C | / |
Storage temperature | 40 — 110 | °C |
Sensor diagram(unit:mm)
Electrode connection:
Pin | 1 | 2 | 3 | 4 |
Definite | Thermopile positive | NTC | Thermopile negative | GND |
Sensor Character:
- Typical thermopile performance (V-T) curve:
- Sensor view angle: The light hole of the sensor is facing the heat source, rotate the window of the sensor around the same axis. The sensor signal response is the range covered when the maximum signal response of the sensor at 50%;
- Filter Performance Curve
Parameter Value Unit Remarks Wavelength range 5.5~14 um Transmittance 1 ≥75 % Average, 5.5~14um Transmittance 2 <1 % <5μm 4. Thermistor (NTC) R-T Table
T(°C) R(CI1) T(°C) It(ICII) T(°C) R(ICL1) T(°C) R(K12) -30 1788. 3 281. 36 63. 69 18. -29 1680. 4 267. 37 60. 70 17. -28 1579. 5 254. 38 57.6610 71 17. -27 1484. 6 242. 39 55. 72 16.1930 -26 1396. 7 230.3940 40 53. 73 16. -25 1314. 8 219. 41 51. 74 15. -24 1237. 9 209. 42 49. 75 15. -23 1165. 10 199. 43 47. 76 14. -22 1098. 11 190. 44 45.3130 77 14. -21 1035. 12 181. 45 43.5o21 78 13. -20 976. 13 173. 46 42. 79 13. -19 921. 14 164.7540 47 40. 80 12. -18 869. 15 157.2290 48 39. 81 12. -17 820. 16 150. 49 37. 82 12. -16 774.8710 17 143. 50 36. 83 11.2270 -15 732. 18 137. 51 35. 84 11. -14 692. 19 131. 52 33. 85 11. -13 654. 20 125. 53 32. 86 10. -12 6191540 21 119. 54 31. 87 10. -II 586. 22 114. 55 30. 88 10. -10 555. 23 109. 56 29. 89 9. _9 525. 24 105. 57 27.5860 911 9. -8 498. 25 100.0000 58 27. 91 9. -7 472. 26 96. 59 26. 92 8. -6 447. 27 92. 60 25. 93 8. -5 424. 28 88. 61 24. 94 8. -4 402. 29 84. 62 23. 95 8. -3 382. 30 81. 63 22. 96 7. -2 362. 31 77. 64 21. 97 7.2360 -I 344. 32 74. 65 21. 98 7. 0 327. 33 71. 66 20. 99 7. I 310.7640 34 68. 67 19. 100 7. 2 295. 35 65. 68 18.5920 101 6. - Recommended circuit:
Basic principle and use method
(1) Combined with the reference circuit, read the resistance value Ra between pin 2 and 4;
(2) According to the resistance value of Ra, the B value constant of NTC and the R-T table in the specification, to get the corresponding ambient temperature Tamb (this temperature is not the ambient temperature of the outside atmosphere, but the internal ambient temperature of the sensor);
(3) Reading the voltage Vibe between pin 1 and 3;
(4) The corrected signal voltage Vobj,cal is obtained by introducing the correction coefficient of the sensor;
(5) Find the voltage value equal to or close to the Vobj,cal value in the Tamb column of the V-T table, and The corresponding Tobj line is the temperature of the measured object Tobj.
Note:
- Due to the existence of individual differences and the influence of blackbody temperature, distance, environment and other factors, each sensor must be calibrated before use;
- The test output voltage of the sensor is easily affected by the NTC resistance value. It is necessary to increase the thermal resistance and thermal capacity to increase the temperature stability. Generally, metal (copper, aluminum) kits are used;
- The view angle of the sensor is large, so it usually need to adjust according to the size of the test target object and the test distance in actual use;
- In order to reduce the thermal interference between the sensor pins, the sensor pins should be thermally isolated when making a PCB;
- Frequent, excessive vibration, strong impact or collision will cause resonance inside the sensor to break.
Zhengzhou Wines Electronics Technology Co., Ltd
Add: No.299, Jinhua Road, National Hi-Tech Zone,
Zhengzhou 450001 China
Tel: +86-371-67169097/67169670
Fax: +86-371-60932988
E-mail: sales@winsensor.com
Website: www.winsen-sensor.com
Tel: 86-371-67169097/67169670 Fax: 86-371-60932988
Email: sales@winsensor.com
Documents / Resources
![]() |
Winsen MRT313 Thermopile Temperature Sensor [pdf] User Manual MRT313 Thermopile Temperature Sensor, MRT313, Thermopile Temperature Sensor, Temperature Sensor, Sensor |