Weizhong GT55 TWS Combo 2 in 1 Smart Watch User Manual

Features: Heart Rate Monitoring, Blood Oxygen Monitoring,
Message Notifications, TWS Status Control, Phone Calling
Charging: Magnetic charging cable with charging pin

Compatibility: DAFIT App for smartwatch connectivity
Special Notes: Audio functions limited to audio and call purposes only

Product Usage Instructions

Charging & Activation
Before using the watch for the first time, it needs to be charged. Use the magnetic charging cable to connect the charging pin on the back of the watch. Connect the cable to a charger or USB port.

Watch App Downloading
To download and install the watch app, scan the QR code provided in the manual. Follow the instructions on the app to connect it with the watch.

Connecting to Smartwatch for Call Functions:

Download the DAFIT App by scanning the QR code in the user manual or searching for “DAFIT” in the App Store.

Turn on Bluetooth on your phone settings.
Open the DAFIT app and click on “Add Peripheral.”

Search for the GT55 device and tap to bind (ensure the watch is fully charged for first-time use).
After successful connection, allow pairing and notifications on your mobile phone.

FAQ

How can I connect my smartwatch to make calls and answer calls?
To connect your smartwatch for call functions, follow these steps:

Download the DAFIT App by scanning the QR code or searching for it in the App Store.
Turn on Bluetooth on your phone’s settings.

Open the DAFIT app and add the peripheral device (GT55).
Search for the GT55 device and tap to bind.

After successful connection, allow pairing and notifications on your phone.

Smart Watch
TWS Combo 2 in 1
User Manual

Quick-use Instructions

Note: When testing heart rate/blood pressure/blood oxygen, the heart rate sensor is required to be in full contact with the skin.

Charging & Activating

Charging watch is required before using the watch at the first time. Using the magnetic charging cable to contact the charging pin on the back of the watch, and connect with the charger or USB port.

Power On/Off Method

Power On: long pressing the Power On/Off button or charging to power on the watch.

Power Off: long pressing the Power On/Off button to power off the watch.

Watch App Downloading

Scan the QR code below to download and install the App.

In other options, you can determine your device by the MAC address in the options
After the watch bound successfully, the watch will be automatically connected with App as it runs, and the data can be synchronized by refreshing the app data page.

Watch Operating Guide

$Weizhong-GT55-TWS-Combo-2-in-1-Smart-Watch- (4)\$

Sports
The watch is able to record and display your dally steps, calories burned and mileage information. More detailed information analysis and data records can be viewed in the client.

Sleep
The watch is able to record and display the total length of your sleep last night and the length of deep sleep and light sleep. More detailed information analysis and data records can be viewed in the client.

Heart Rate
Click the heart rate icon to measure the current heart rate. More detailed information analysis and data records can be viewed in the client.

Exercise
Multiple sports modes are available, including: walking running, cycling, basketball, football, badminton and rope skipping. More detailed information analysis and data records can be viewed in the client.

Phone Calling
This interface can control the phone to make calls, View recent calls, etc

Blood Oxygen
Click on the blood oxygen icon to measure the current blood oxygen value. More detailed information analysis and data records can be viewed in the client.

Weather
The weather page displays current weather, air quality information, and tomorrow’s conditions. The weather information needs to be connected to the client to obtain the data. If the connection is disconnected for a long time, the weather information will not be updated.

Message Notification
The watch is able to receive the notification push displayed on the mobile phone, and the push item switch can be set in the client. The watch message page can store the latest message records.

Camera control
After connecting the phone, the watch can be used as a remote control for the phone camera. After opening the camera on the phone, click on the watch camera control page to trigger the phone camera shutter. The delayed photo opportunity can be set to 0 seconds, 3 seconds, and 10 seconds.

Alarm Clock
The smart alarm clock of the watch can be set in the client, and up to 3 alarm clocks can be set. When setting the time, the watch will display the alarm icon and vibrate.

Other features
Other features of the watch include silent mode, brightness adjustment, factory reset, and shutdown operation.

Music Control
You can control phone playback/pause on the musi control interface Music, Previous/Next, Volume of Music+/-

Special Notes
Please ensure that the phone must be opened in the smartwatch according to the diagram Audio can only be used for audio and call functions

TWS Status
You can see the headset state here, including three states: headset removal, charging and full power.

Instructions for using the Bluetooth headset function

Tws pairing

Headset pairing. Take the headset out of the wristband host, there will be a power-on prompt, turn on Bluetooth in the phone settings, find the corresponding Bluetooth name “G-Pods” for Bluetooth connection, the TWS headset has been paired before the factory. Only the Bluetooth name “G-Pods” is displayed. If the phone is connected, it means that the product has been successfully connected.
The TWS headsets have been paired successfully at the factory. When the headsets are removed from the main unit of the bracelet, they will automatically turn on and automatically pair and connect.
If the headset is disconnected from the phone during use or the headset is not connected, the phone needs to be reconnected to Bluetooth. There is a previously connected Bluetooth model in the Bluetooth under the phone settings, please clear it first, and then search for Bluetooth G-Pods to connect.

Attention: This app is not a medical device. Data obtained during the use of this app is for reference only, and should not be used for clinical diagnosis, medical research, diagnostic, or treatment purposes.

The middle surface of the headset is a touch surface, which is used to touch control to answer/hang up the phone, control the previous/next song, Al voice assistant.

Answer and hang up calls
When you call, remove the headset from the bracelet, and touch the left ear or right ear for two consecutive times.Answer the phone, then touch the phone two and hang up

Music operation
Double click to pause / play, triple Click to previous / next

Al voice assistant and call
When the headset is connected to Bluetooth, press and hold the touch button for knock fourtimes to activate the siri of the iphone and the voice assistant of the Android phone. The voice assistant can be used to make calls, query the weather, navigate maps and other functions. Voice activation is only effective when the phone is in the standby interface or the main time interface.

Q: Why is the earphone not sensitive to touch when it is put in .
The headsetis touched, and sometimes it wears ears, which makes the touch insensitive. Just turn the headset in a direction.

Frequently Asked Questions and Answers

Q: Why is there a deviation between the blood pressure value and the sphygmomanometer?
A: The deviation of the measured values between the watch and the sphygmomanometer is determined by many factors. The measurement site of the sphygmomanometer is in the brachial artery, and the measurement site of the watch is in the two main branches of the arterioles. Under normal circumstances, the difference between the aortic blood pressure measurement value and the micro-arterial blood pressure measurement value will be three to forty; When the watch and the sphygmomanometer are used for measurement at the same time, because the blood flowing in the artery is in the centrifugal direction, the strap will cause the part below the middle of the elbow to be compressed when the sphygmomanometer measures, causing the blood to temporarily fail to flow smoothly to the branch of the artery below; At the same time, the vascular tension will increase, so that the deviation of the upper and lower blood pressure measurements will be greater.

Q: Why can’t the watch be worn while taking a hot bath?
A: The temperature of the bath water is relatively high, which will generate a lot of water vapor. Since water vapor is in the gas phase, its molecular radius is small, and it is easy to penetrate into the gap of the watch case. When the temperature drops, it will re-condensate into water droplets in the liquid phase, causing a short circuit in the watch’s internal circuit, damaging the watch’s circuit board, and then damaging the watch.”

Q: Why can’t the watch receive message push?
A: Android phone settings:

Confirm that the message push switch is turned on in the mobile client;
Confirm that the message can be displayed normally in the mobile phone notification bar, the watch message push is pushed by reading the mobile phone notification bar message; if there is no message in the mobile phone notification bar, the watch will not be able to receive the push;(It is required to find the notification settings in the phone settings, turn on the notification switch of WeChat, QQ, phone, SMS, mobile client)

Open the accessibility settings of the bracelet client It is required to find the auxiliary function in the phone settings, open the auxiliary function settings of the bracelet client).

A: Apple phone settings:

Confirm that the message push switch is turned on in the mobile client;

Confirm that the message can be displayed normally in the notification bar of the mobile phone (It is required to find the notification setting in the mobile phone settings, turn on the notification switch of WeChat, aQ, phone, SMS, mobile client)

How to connect to a smartwatch and use call answering and dialing functions?

Step 1: Download the DAFIT App (scan the QR code in the use manual or search for ” DAFIT” in the App Store)

Step2: Turn on Phone’s Bluetooth on Setting
Step3: Open the DAFIT. click “Add Peripheral Now”
Step4: Search the “GT55” device, tap it to bind. (Please fully charged it when the first time to use.)

Step5: After the mobile phone is successfully connected, please click to allow “Pair” and “Allow” notification
Step6: Swipe down the watch homepage, tap and turn on the “Call” function.
Step 8: You can now use your watch to receive and make calls

Note: Please do not connect the watch to the phone’s Bluetooth directly, otherwise some functions may not be available

Warning
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

RF exposure:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Attention
This app is not a medical device. Data obtained during the use of this app is for reference only, and should not be used for clinical diagnosis， medical research, diagnostic, or treatment purposes.

Documents / Resources

Weizhong GT55 TWS Combo 2 in 1 Smart Watch [pdf] User Manual
GT100, GT55 TWS Combo 2 in 1 Smart Watch, GT55, TWS Combo 2 in 1 Smart Watch, Combo 2 in 1 Smart Watch, 2 in 1 Smart Watch, Smart Watch, Watch

References

User Manual

Weizhong GT55 TWS Combo 2 in 1 Smart Watch

Product Information