Watteco top

Quick Start
GUIDE

WATTECO Pulse Sens’O LoRaWAN External Sensor A01

Pulse Sens’O
50-70-160
Pulse Sens’O IP68
50-70-039

WATTECO Pulse Sens’O LoRaWAN External Sensor A02

In’O
50-70-016
50-70-087

33-70-034-001

1 Start

Side view WATTECO Pulse Sens’O LoRaWAN External Sensor A03Front view WATTECO Pulse Sens’O LoRaWAN External Sensor A04 LEDs

Warning 1 Provision the device on your LoRaWAN® network with the keys available on a secure platform.

ON

WATTECO Pulse Sens’O LoRaWAN External Sensor A05a WATTECO Pulse Sens’O LoRaWAN External Sensor A05b WATTECO Pulse Sens’O LoRaWAN External Sensor A05c
LED rouge
Red LED
Green LED : Network searching Green LED Association
  Wait Wait

OFF

WATTECO Pulse Sens’O LoRaWAN External Sensor A06A WATTECO Pulse Sens’O LoRaWAN External Sensor A06B
LED rouge
Red LED
LED rouge : Extinction
Red LED : Switching off
Wait
Video : ON – OFF

WATTECO Pulse Sens’O LoRaWAN External Sensor QR code 1

https://www.watteco.fr/assistance/tutoriels-video/

2 Connectors
In’O

WATTECO Pulse Sens’O LoRaWAN External Sensor A08

Pulse Sens’O

WATTECO Pulse Sens’O LoRaWAN External Sensor A09

Pulse Sens’O IP68

Wire Colour Green White Brown Pink Blue Yellow
Connector Input 1+ Input 1- Input 2+ Input 2- Input 3+ Input 3-
Input

Characteristics of the 3 inputs:

  • Impedance: 1MΩ
  • Tension : 0-30Vdc
  • Delivered current: 3.5 µA
  • Signal frequency max: 0-100 Hz

Wiring :

  • Depending on the type of output

Isolated dry contact output

F<100Hz

WATTECO Pulse Sens’O LoRaWAN External Sensor B01

Signal output

F<100Hz

WATTECO Pulse Sens’O LoRaWAN External Sensor B02

A
+- 2.5V < U < +- 30V
+- 0V < U < +- 0.8V

NPN open collector output

F<100Hz

WATTECO Pulse Sens’O LoRaWAN External Sensor B03

Compatible with 3V voltage and a 3µA current.

Others, need to connect a compatible external power supply and a resistor to limit the current.

WATTECO Pulse Sens’O LoRaWAN External Sensor B04

Output
WATTECO Pulse Sens’O LoRaWAN External Sensor B05 WATTECO Pulse Sens’O LoRaWAN External Sensor B06
3 Setting up
Opening / Closure

WATTECO Pulse Sens’O LoRaWAN External Sensor B07


Wall mounting

WATTECO Pulse Sens’O LoRaWAN External Sensor B08


DIN

WATTECO Pulse Sens’O LoRaWAN External Sensor B09

Please note that after installation of the kit, the protection rating of the housing will change to IP50.

4 Radio propagation

WATTECO Pulse Sens’O LoRaWAN External Sensor B10

5 Characteritics
Reference 50-70-160 50-70-039 50-70-016 50-70-087
Class A A A C
Power Level +14 dBm +14 dBm +14 dBm +14 dBm
Antenna Internal Internal External External
Casing materials ASA / PC ASA / PC ASA / PC ASA / PC
IP rating IP55 IP68 IP55 IP55

WATTECO Pulse Sens’O LoRaWAN External Sensor QR code 2                          WATTECO Pulse Sens’O LoRaWAN External Sensor QR code 3

SITE SUPPORT                      CERTIFICATIONS
https://support.watteco.com/

Watteco last 1Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-016/50-70-087/ 50-70-160/50-70-039 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/

 

Watteco logo

IoT device manufacturer

Thanks for choosing WATTECO devices

Watteco last A

Documents / Resources

WATTECO 50-70-160 Pulse Sens’O LoRaWAN External Sensor for Remote Meter Reading [pdf] User Guide
50-70-160, 50-70-039, 50-70-016, 50-70-087, 50-70-160 Pulse Sens O LoRaWAN External Sensor for Remote Meter Reading, 50-70-160, Pulse Sens O LoRaWAN External Sensor for Remote Meter Reading, Pulse Sens O LoRaWAN External Sensor, LoRaWAN External Sensor, External Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *