vizrt Viz CaptureCast Single Workflow Licensed Server
Product Information
Specifications:
- Brand: Viz CaptureCast
- Connections: Keyboard & Mouse, Network
Cable, USB-C cable - Power: Mains cable
- User: capturecast_customer
- Password: customer101
Thank you for purchasing Viz CaptureCast™, Vizrt all-in-one automated video capture, webcasting, and publishing solution for NDI® with advanced monitoring, management, playback, and direct integration with industry-leading video management platforms. Below are the first steps you need to take to get your new Viz CaptureCast™ up and running.
Setting up the Viz CaptureCast
Step 1. Connect Keyboard & Mouse
Release the Vizrt faceplate using the left hand button, to reveal front connections.
Step 2. Connect Network Cable
Connect network cable to the network port on the unit backplane.
Step 3. Connect your display
Connect USB-C cable to display and connect display to power outlet.
Step 4. Connect Viz CaptureCast to power.
Connect mains cable and press power button. Re-attach faceplate to unit.
Step 5. Connect Viz CaptureCast to power.
Once powered up, click on the default user: capturecast_customer and type in the default password: customer101 and hit enter. You can then click here for a hints and tips to set up your Viz CaptureCast.
Please refer to instructions inside box for rack rail installation guidance
Frequently Asked Questions (FAQ)
- Q: What should I do if I forget my password?
A: If you forget your password, please contact customer support for assistance in resetting your password. - Q: Can I use a different keyboard and mouse with Viz CaptureCast?
A: Yes, you can use compatible keyboards and mice with Viz CaptureCast by connecting them to the designated ports.
Documents / Resources
 |
vizrt Viz CaptureCast Single Workflow Licensed Server [pdf] User Guide Viz CaptureCast Single Workflow Licensed Server, Viz CaptureCast, Single Workflow Licensed Server, Workflow Licensed Server, Licensed Server, Server |
