VIISAN VF16401 Wall Mounted Visualizer User Guide

The Wall-Mounted Visualizer is compatible with third-party software, but for optimal performance, it is recommended to install the ViiBoard software. Follow these steps:
Install the software on your computer.

Launch the ViiBoard software.
Enter the 16-digit activation code provided with the software to activate it.

Using the Visualizer

Place your demonstration materials on the plate of the Wall-Mounted Visualizer.

Use the touch buttons (Capture, Zoom In, Zoom Out, Rotate, Freeze, Start App) to control the visualizer.

Unpacking

Before using the product, ensure the following items are included in the package. If anything is missing, contact the retailer where you purchased the product.

Wall-Mounted Visualizer
USB Cable

Key × 2
Plastic Expansion Anchor × 4

PWA4×40mm D=10.0mm screw × 4
Quick Start Guide

Parts Descriptions

Touch Buttons (Capture / Zoom In / Zoom Out / Rotate / Freeze / Start App)

Screw Cap Cover × 4
Hasp

LED Light Button
Camera

Clip
Plate

Hardware Installation

Step 1

First, remove the four Screw Cap Covers from the Wall-Mounted Visualizer, and then align the four points on the wall and drill four holes.
Insert the four Plastic Expansion Anchors” into the four holes in the wall.
Step 2
Screw four “PWA4×40mm D=10.0mm” screws into the wall.
Finally, cover the four Screw Cap Covers.
Step 3
Connect the supplied USB cable to an Interactive Flat-Panel Display (IFPD) or a computer.
Place your demonstration materials on the plate of the Wall-Mounted Visualizer and launch the ViiBoard software to begin using it for your teaching purposes.

Software Installation

The Wall-Mounted Visualizer is equipped with a standard UVC Camera, allowing compatibility with third-party software that can recognize the camera’s source.
Nevertheless, to fully utilize the visualizer’s features, we highly recommend utilizing our exclusive ViiBoard software.
You can conveniently download it for free from our website using the link provided below.
https://www.viisan.com/en/download/type4.html

NOTE: After the ViiBoard software is installed completely, please enter the 16-digit activation code to activate the software.

Warranty

Warranty Exclusions

The following circumstances are excluded from warranty coverage:
Product damage is caused by catastrophes, thunder strikes, faulty electric power, and environmental factors.
Defacing of product labeling (label alterations and falsifying, serial number missing, serial number no longer discernible, serial number invalid). All serial numbers are recorded and tracked for warranty purposes.

Unauthorized changes of non-parts, modifications or alterations, and parts removal in or to the products.
Damage caused by operator error or operator fails to comply user manual instruction, such as, but not limited to improper storage resulting in product get wet, corrosion, ell off, squeezed or exposed to inadequate temperature/humid environment.
Accessories or packing material such as boxes, user manual, etc.

CONTACT

VIISAN Technology Co., Ltd.
www.viisan.com
Customer service: info@viisan.com

FAQ

Q: What should I do if any parts are missing from the package?
- A: If any parts are missing, please contact the retailer where you purchased the product for assistance.

Q: Can I use the visualizer with other software?
- A: Yes, the visualizer is compatible with third-party software that can recognize the camera’s source. However, for best results, it is recommended to use the ViiBoard software.

Documents / Resources

VIISAN VF16401 Wall Mounted Visualizer [pdf] User Guide
VF16401, VF16401 Wall Mounted Visualizer, Wall Mounted Visualizer, Mounted Visualizer, Visualizer

References

User Manual

VIISAN VF16401 Wall Mounted Visualizer

Specifications

Product Usage Instructions