VETEK OCS-Y2 Crane Scale Compact Dynamometer Wireless Display
Product Information
Features
- This dynamometer combines a sound mechanical design with advanced electronics for versatility, reliability, accuracy, and ease of operation.
- It adheres to Chinese national standards and European CE directives, ensuring quality and safety with its aluminum or steel case.
- The dynamometer features a 2-line FSTN LCD display and utilizes SMT technology for stability over time.
Specifications
The dynamometer is available in various models with different capacities and resolutions to suit different needs. See the table below for details.
Dynamometer Operation Guide
The dynamometer operation involves key functions like Tare, Peak Hold, and Unit Switch. Short and long pressing actions on the keys perform specific operations.
Indicator Display
The indicator display shows wireless signal strength, battery power levels, weighing conditions, and the unit of weight being measured. Different units are available based on the dynamometer and indicator settings.
Usage Instructions
- Preparation: Before using the dynamometer, read the manual thoroughly for proper understanding.
- Safety: Avoid overloading the dynamometer,leaving weights loaded for extended periods, using it under extreme weather conditions, or attempting self-repair.
- Battery: Replace the battery with fully charged ones when the dynamometer runs out of power.
- Maintenance: Regular maintenance ensures good performance and accurate measurements.
Frequently Asked Questions
Q: Can I repair the dynamometer myself if needed?
A: No, it is recommended to contact your local representative for any repair needs to avoid damage and ensure safety.
Q: What should I do if the dynamometer runs out of power?
A: Replace the battery with fully charged ones to continue using the dynamometer without interruptions.
Introduction
NOTICE
Before you use this dynamometer, please read this manual through carefully, and keep it properly for future use.
Safety Guide
For good performance and precise measurement, be careful with daily operation and maintenance. Note the following instructions:
- Do NOT overload the dynamometer. This will damage the loadcell and void the warranty.
- Do NOT leave weight loaded on the dynamometer for long. This will decrease the dynamometer’s accuracy and shorten the loadcell’s life.
- When the dynamometer runs out of power, replace the battery with a full ones.
- Do NOT use a dynamometer under thunder or rain.
- Do NOT attempt to repair dynamometer yourself. Contact your local representative.
SPECIFICATION
FEATURE
This dynamometer is a combination of the sound and proven mechanical design, with today’s most advanced electronics to provide a superb feature set. It is versatile, reliable, accurate and easy to operate.
| Superb Quality | Strictly in accordance with Chinese GB/T11883-2002 national standards, and European CE
directives. |
| Great Safety | Quality aluminum or steel case
for better safety. |
| Newest
Design |
2-line digits FSTN LCD display,
with optional shackle. |
| Leading Technology | SMT technology, quality integrated circuit and dedicated weighing loadcell, ensures long
time stability. |
| Power | Dynamometer battery 3.7V1200ma
indicator battery 3.7V3000ma |
| Portable | Compact structure, easy to carry. |
SPECIFICATION
| Accuracy | ±0.1%F.S. |
| Tare Range | 100% F.S. |
| Overload Alarm | >F.S.+9e |
| Max. Safety Load | 120% F.S. |
| Battery Life | ＞100 hours |
| Temp. (Op.) | – 10℃ ~ + 40℃ |
| Display | 43mm(16.92inch) screen 22mm(8.663inch) character |
Capacity & Resolution
| Model | Cap. kg/lb | E kg/lb | Div kg/lb |
| OCS-1-Y2 | 1,000/2,200 | 0.5/1 | 2,000 |
| OCS-2-Y2 | 2,000/4,400 | 1/2 | 2,000 |
| OCS-3-Y2 | 3,000/6,600 | 1/2 | 3,000 |
| OCS-5-Y2 | 5,000/11,000 | 2/5 | 2,500 |
| OCS-10-Y2 | 10,000/22,000 | 5/10 | 2,000 |
| OCS-15-Y2 | 15,000/33,000 | 5/10 | 3,000 |
| OCS-20-Y2 | 20,000/44,000 | 10/20 | 2,000 |
| OCS-30-Y2 | 30,000/66,000 | 10/20 | 3,000 |
| OCS-50-Y2 | 50,000/110,00 | 20/50 | 2,500 |
Dynamometer Operation Guide
Indicator Display
： Wireless signal
： Dynamometer battery power and Indicator battery power
： Weighing condition
： Unit of weight
Limited by the display size, there are kg lb UN three units of indicator, and kg lb N kN UN five units of dynamometer. When the dynamometer unit shows N, kN, the indicator will not show the unit, but the weighing value is consistent.
Indicator Operation Guide
| Key | Name | Function |
|
ON/OFF |
On/Off |
Short pressing: Cancel & return to weighing mode
Long pressing: Power-on / off |
| T/Z | Tare | Short pressing: Tare in/out; Long
pressing: Zero; |
| PEAK | Peak | Peak lock/unlock |
| HOLD | Hold | Lock/unlock |
| HOLD+P
EAK |
Unit Switch |
Unit Switch |
| F1 | Date | Press once: show clock;
Press twice: Show the date |
| F2 | Backlight | Backlight on/off |
| 2ND | Password | Password startup interface |
Indicator Charge Guide
- Turn off the power of indicator；
- Connect the charging cable.；
- Start flashing；
- Stop flashing and display full, indicating that the battery is full；
Notice：It takes about eight hours to fully charge
Documents / Resources
 |
VETEK OCS-Y2 Crane Scale Compact Dynamometer Wireless Display [pdf] User Guide OCS-Y2, OCS-Y2 Crane Scale Compact Dynamometer Wireless Display, Crane Scale Compact Dynamometer Wireless Display, Compact Dynamometer Wireless Display, Dynamometer Wireless Display, Wireless Display, Display |