verifone VP100 Mobile Payment System Terminal

Specifications

• Input Power Rating: VOP1u0tp0uitsVinotletangdee:d5tVo DC, 2.2A
• Output Rating: 5V DC, minimum 2.2A
• Power Supply Module: UL listed, Class II, DPIU type

Electrical

Power Source
Before you connect the terminal power pack to an electrical outlet, check that the power switch on the terminal is off. If the terminal does not have an on/off switch, check that the power cable connector is removed from the terminal’s power port. Or, when connecting the terminal to a power pack, always connect the plug of the power pack to an electrical wall outlet first. Then connect the power cable to the terminal’s power port.

The reference input power rating is as follows:

• Input Voltage: 100-240V AC, 50/60 Hz
• Output Voltage: 5V DC, 2.2A

Models VP100 is intended to be provided with a UL listed power supply module having an output rating of 5V DC, minimum 2.2A, Tma 45°C, Class II, DPIU type and evaluated as a Limited Power Source or PS2 or equivalent.

AC Adapter
The AC adapter is designed to ensure your safety and to be compatible with this equipment. Please follow these guidelines:

• Do not use the adapter in a high-moisture environment. Never touch the adapter when your hands or feet are wet.
• Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
• Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging.
• Do not use the adapter if the cord is damaged.
• Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.

Disconnecting Power
Disconnecting power during a transaction may cause transaction data files that are not yet stored in the terminal memory to be lost.

Equipment

Location – Electrical Considerations
WARNING! This device contains sensitive electronic components that can be permanently damaged if exposed to excessive shock, electrical interference, or vibration.

CAUTION: Due to the risk of electric shock, or damage to the terminal, do not use this equipment near a water source, for example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Likewise, avoid using this product during thunderstorms causing power cuts. Avoid placing the terminal near electrical devices or other units that could cause large voltage fluctuations or electrical interference, such as air conditioners, neon signs, high-frequency safety devices, or electrical equipment.

Damage
Carefully inspect the shipping carton and its contents for any damage. If the unit or any product component appears damaged or to have been tampered with, immediately notify the shipping company and your Verifone distributor or service provider. Do not use VP100 unit that has been tampered.

Repairs
Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local Verifone distributor or service provider for assistance. Failure to comply may void the product warranty.

Location – Environmental Considerations
Do not plug the power pack into an outdoor outlet. Any damage to the unit from exposure to water or dust may void your warranty. Do not use the terminal where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the terminal away from direct sunlight and anything that radiates heat, such as a stove or a motor.

WARNING! Your POS terminal contains sensitive electronic components that can be permanently damaged if exposed to excessive shock or vibration. To minimize the risk of damage to your terminal, avoid dropping your terminal and operating it in high-shock and high-vibration environments. Do not store the terminal where prolonged exposure to extreme temperatures can occur because it can cause permanent damage. Do not expose the terminal to water. Contact with water can cause this unit to malfunction.

Cleaners and Solvents
Never use thinner, trichloroethylene, or ketone-based solvents to clean the V660p-A device, these may deteriorate plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or display. For best results, use a clean cloth dampened with water and mild soap. To remove stubborn stains, use alcohol or an alcohol-based cleaner.

Notice for WLAN
For CE WLAN: 5250-5350 MHz

This device is restricted for indoor usage only when operating in the 5250-5350 MHz frequency range.

This equipment may be operated in:
AT	BE	BG	HR	CY	CZ	DK	EE
FI	FR	DE	EL	HU	IE	IT	LV
LT	LU	MT	NL	PL	PT	RO	SK
SI	ES	SE	UK(NI)	IS	LI	NO	CH
TR

For UK WLAN: 5250-5350 MHz

This device is restricted for indoor usage in the UK when operating in the 5250-5350 MHz frequency range.

For ISED WLAN: 5150-5250 MHz

1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
2. Where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section shall be clearly indicated.

Notice of Label Location
The label of our device will be affixed under the battery compartment for your reference.

VP100 Certifications and Regulations

FCC/ISED Compliance
The following product has been tested and certified as compliant with the regulations and guidelines detailed below:

• Manufacturer: VeriFone, Inc.
• Brand: Verifone
• Model: VP100

Part 15 of FCC and ISED Rules
This device complies with the limits for a Class B digital device as specified in Part 15 of FCC and Innovation, Science and Economic Development Canada license-exempt RSS standard(s) Rules which provides reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment generates and uses radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. In the unlikely event that there is interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or ask an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC Rules. Any changes or modifications to this equipment not expressly approved by Verifone could void the user’s authority to operate this equipment.

NOTE: The country code selection is for non-US models only and is not available to all the US models. Per FCC regulation, all Wi-Fi product markets in the US must be fixed to US operation channels only.

RF Exposure

• CE
  The product complies with the Radio Equipment Directive (2014/53/EU) issued by the Commission of the European Community. A minimum separation distance of 0.5 cm must be maintained between the device and the user’s body during body-worn operation and a minimum separation distance of 0 cm must be maintained between the device and the user’s extremity during the extremity operation to comply with the RF exposure requirements in Europe. To comply with RF exposure requirements in Europe, third party belt-clips, holsters, or similar accessories used by this device should not contain any metallic components. Use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided.
• UK
  This device complies with the Radio Equipment Regulations 2017 SI 2017/1206 issued by the British Standards Institution. A minimum separation distance of 0.5 cm must be maintained between the device and the user’s body during body-worn operation and a minimum separation distance of 0 cm must be maintained between the device and the user’s extremity during the extremity operation comply with the RF exposure requirements in the UK. To compliance with RF exposure requirements in the UK, third party belt-clips, holsters or similar accessories used by this device should not contain any metallic components. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided.
• USA
  The product complies with the FCC RF exposure limit for an uncontrolled environment and is safe for the intended operation as described in this document. Further RF exposure reduction can be achieved by keeping the product as far as possible from the user’s body or by setting the device to a lower output power if such a function is available. The SAR limit set by the FCC is 1.6W/kg for body-worn SAR and 4W/kg for extremity SAR. This device has been tested and meets the FCC RF exposure guidelines, requiring it to be positioned a minimum of 0.5 cm from the body. This device complies with SAR limits for general population/uncontrolled exposure as specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement methods and procedures outlined in IEEE 1528-2013.
• ISED
  This EUT complies with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with a minimum distance of 0.5 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Notice for Operating Frequency and Output Power

Feature	VP100
NFC (dBμA/m at 10m)	5.31(Measured Value)
2.4G WLAN (b/g/n): 2400-2483.5 MHz (EIRP dBm)	<20
5G WLAN (a/n/ac): 5150-5250/5250-5350/ 5470-5725 MHz/5725-5850 MHz (EIRP dBm)	<20 (5725-5850 MHz< 13.98 dBm)
BT-EDR/LE (EIRP dBm)	<20
2G (dBm)	GSM900:<33, GSM1800:<30
3G (dBm)	Band I/V/VIII:<24
4G (dBm)	Band 1/3/5/7/8/20/28/38/40/41/66:<24

Operating Temperature
The product is designed to work at maximum ambient temperatures of (Tma) -5°C and 45°C.

Battery Pack Protection Temperature Warning Statement

• • The highest specified charging temperature of the battery pack is 45+-2°C.
• • The lowest specified charging temperature of the battery pack is 0+-2°C.

Battery Pack/Coin Cell Instructions for Portable Product
Dispose of the battery/coin cell in accordance with all national, state, and local laws and regulations as regionally required. Some batteries may be recycled and may be accepted for disposal at local recycling centers.

CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Recycling: DO NOT DISCARD!
UNIT MUST BE RECYCLED OR DISPOSED OF PROPERLY.

For proper disposal instructions, go to http://recycle.verifone.com/

Please retain this sheet for future reference.

FAQ

Q: What should I do if my terminal appears damaged upon?
A: If any damage is noticed upon receipt, contact the shipping company and Verifone distributor immediately. Do not use a tampered unit.

Q: Can I clean the terminal with any type of solvent?
A: Avoid using thinner, trichloroethylene, or ketone-based solvents. Use a clean cloth with water and mild soap for regular cleaning.

Q: How should I handle the terminal to prevent damage?
A: Avoid exposure to water, extreme temperatures, shock, and vibration. Keep away from direct sunlight and sources of heat.

Documents / Resources

verifone B32VP100 Mobile Payment System Terminal [pdf] User Guide B32VP100, B32VP100 vp100, B32VP100 Mobile Payment System Terminal, B32VP100, Mobile Payment System Terminal, Payment System Terminal, System Terminal, Terminal

References

• User Manual