veratron B00200 Series Temperature Sensors Owner’s Manual
TEMPERATURE SENSORS
Connectors:
Blade Terminal
6.3 x 0.8 mm
- These resistive temperature sensors are built in a housing of brass.
- All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors.
- The sensors can be applied in a wide field of applications.
Measurement range: 0-120°C or 0-150°C
Output signal: Standard 120° or 150° curves
Protection Rating: IP67
Temperature response time: Min. 3 minutes
ART.NR. | SENSOR TYPE | THREAD | RANGE |
B001999 | Water Temp | 1/2″-14NPT | 120°C |
B002000 | Water Temp | 1/4″-18NPT | 120°C |
B002001 | Water Temp | M14x1.5 | 120°C |
B002002 | Water Temp | M16x1.5 | 120°C |
B002003 | Engine Oil Temp | 1/2″-14NPT | 150°C |
B002004 | Engine Oil Temp | 3/8″-18NPT | 150°C |
B002005 | Engine Oil Temp | M14x1.5 | 150°C |
B002006 | Engine Oil Temp | M16x1.5 | 150°C |
TEMPERATURE | WATER | OIL |
40 °C | 300 Ω ±8.0% | – |
50 °C | 205 Ω ±7.5% | 362 Ω ±7.5% |
60 °C | 142 Ω ±7.0% | 251 Ω ±7.0% |
70 °C | 101 Ω ±6.4% | 178Ω ±6.5% |
80 °C | 72.5 Ω ±6.0% | 128Ω ±6.0% |
90 °C | 53.2 Ω ±5.5% | 94.0Ω ±5.5% |
100 °C | 39.6 Ω ±5.5% | 70.0 Ω ±5.0% |
110 °C | 30.0 Ω ±5.5% | 53.0Ω ±5.5% |
120 °C | 22.9 Ω ±6.0% | 38.1Ω ±12% |
130 °C | – | 31.4Ω ±6.2% |
140 °C | – | 24.7Ω ±6.5% |
150 °C | – | 19.6Ω ±7.0% |
Documents / Resources
![]() |
veratron B00200 Series Temperature Sensors [pdf] Owner's Manual B002003, B002004, B002005, B00200 Series Temperature Sensors, B00200 Series, Temperature Sensors, Sensors |