VAXEE-logo

VAXEE OUTSET AX Wireless Mouse

VAXEE-OUTSET-AX-Wireless-Mouse-product

Contents of Package

  1. Mouse
  2. Wireless Dongle (USB)
  3. Wireless Dongle Adapter
  4. Charging and Data CableVAXEE-OUTSET-AX-Wireless-Mouse-fig-1

SetupVAXEE-OUTSET-AX-Wireless-Mouse-fig-2

Wired ModeVAXEE-OUTSET-AX-Wireless-Mouse-fig-3

Connect the mouse to any USB port on your PC using the charging cable

Wireless Mode

Plug the wireless USB dongle into any USB port on your PC.VAXEE-OUTSET-AX-Wireless-Mouse-fig-4

Mouse FeaturesVAXEE-OUTSET-AX-Wireless-Mouse-fig-5

  1. Left Button
  2. Right Button
  3. Middle Button
  4. Back Button
  5. Forward Button
  6. DPI Switch Button
  7. Report Rate Button
  8. Click Latency Button
  9. Power Switch

SpecificationsVAXEE-OUTSET-AX-Wireless-Mouse-fig-6

  • DPI Settings: 400 / 800/1600 / 3200 dpi
  • Adjustable USB Report Rate: 125 / 500 / 1000 Hz
  • Adjustable Click Latency. 2/3 / 4/8 ms
  • Adjustable Competitive Mode: On / Off
  • Adjustable Motion Sync: On / Off
  • Battery Life: Consistent motion at 1000Hz – Up to 100hrs in Standard Mode and 55hrs in High Competitive Mode
  • Charging Speed: From 0%-100% in roughly 1hr 50mins
  • Charging Speed: From 0%-100% in roughly 1hr 50mins
  • Weight: 73g
  • Sensor: PAW3395
  • Connector: USB
  • Buttons: 9 buttons
  • Cable Length: 2 meters (6.6 feet)

Recommended Usage Environment

VAXEE-OUTSET-AX-Wireless-Mouse-fig-7For optimal wireless performance, use a mouse within 20cm of Wireless Dongle and further than 2m from sources of 2.4GHz interference (such as Wi-Fi routers)

Charging and Power LED LightsVAXEE-OUTSET-AX-Wireless-Mouse-fig-8

  • Connect the USB cable to use it in wired mode
  • Charging: Both lights blink in a cycle
  • Fully Charged Both lights stay on continuously

LED Lights during Charging

  • Hold the Right Button (2) + Middle Button (3) to display the current charge level of the mouse.VAXEE-OUTSET-AX-Wireless-Mouse-fig-9

Lift-off distance AdjustmentVAXEE-OUTSET-AX-Wireless-Mouse-fig-10

  • Hold the Report rate switch button (7)| while the power is offVAXEE-OUTSET-AX-Wireless-Mouse-fig-11 then turn on the power:VAXEE-OUTSET-AX-Wireless-Mouse-fig-11VAXEE-OUTSET-AX-Wireless-Mouse-fig-12

Motion Sync AdjustmentVAXEE-OUTSET-AX-Wireless-Mouse-fig-13

  • Hold the DPI switch button (6) while the power is offVAXEE-OUTSET-AX-Wireless-Mouse-fig-11 then turn on the power:VAXEE-OUTSET-AX-Wireless-Mouse-fig-11VAXEE-OUTSET-AX-Wireless-Mouse-fig-14

Competitive Mode AdjustmentVAXEE-OUTSET-AX-Wireless-Mouse-fig-15

  • Hold the Click Latency button (8)| while power is offVAXEE-OUTSET-AX-Wireless-Mouse-fig-11While holding, turn the power onVAXEE-OUTSET-AX-Wireless-Mouse-fig-16
  • If the number 4 indicator light blinks 3 times and goes off – Competitive Mode Off.
    • If the number 2, 4 and 8 indicator lights blink 3 times and go off – Competitive Mode On. (Default)

Displaying Mouse StatusVAXEE-OUTSET-AX-Wireless-Mouse-fig-17

  • Hold the Forward button + Back button + Middle button (3+4+5)
  • Indicator lights on the bottom will show the current status of the mouse.VAXEE-OUTSET-AX-Wireless-Mouse-fig-18

В Dongle Function

  • Ax Wireless provides an A/ B dongle switch function
  • If you require an additional dongle, please visit the VAXEE website to make your purchase.VAXEE-OUTSET-AX-Wireless-Mouse-fig-19
  • For dongle pairing and switching, please scan the QR code below for the “VAXEE Dongle User Manual”.VAXEE-OUTSET-AX-Wireless-Mouse-fig-20

FCC Approval

This device had been tested in accordance with the procedures and in compliance with Part 15 Subpart B of FCC Rules, and keeps all requirements according to ANSI C63.4 & FCC Part 15 B Regulation and CISPR22 Class B.

FCC 15.21:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.109:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

15.105:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Warning: This device contains transmitters and receivers that emit Radio Frequency (RF) energy.
The device is designed to comply with the limits for exposure to RF energy set by the Federal Communications Commission (FCC) of the United States, Industry Canada (IC) of Canada, and the regulating entities of other countries.

Documents / Resources

VAXEE OUTSET AX Wireless Mouse [pdf] User Guide
2A9L8-AXWL, 2A9L8AXWL, OUTSET AX Wireless Mouse, Wireless Mouse, Mouse

References

Leave a comment

Your email address will not be published. Required fields are marked *