unitech MS912+ Decoder

Decoder

How to set the Field separator

1. Scan [.M005$] in UM Pg 72
2. Scan [.M007$] DEFINE EAN128 in UM Pg 72
3. Scan [+] + from the full ASCII table. in UM Pg 77
4. Scan [.M007$] DEFINE EAN128 in UM Pg 72

FW

How to set the MS912plus pin code?
By default, the Pincode under SPP profile for the scanner is “1234”, please refer to the MS912plus user manual in chapter 4.2.2.4 to customize this Pincode, if you need.

unitech electronics co., Itd.
5F No. 136, Lane 235, Pao-Chiao Rd., Hsin-Tien City, Taipei Hsien, Taiwan 231, R.O.C.
Fax: 886-2-8912-1391
w www.ute.com
Tel:+886-2-8912-1122

Documents / Resources

unitech MS912+ Decoder [pdf] User Manual MS912 Decoder, MS912, Decoder

References

• User Manual