UniPOS 7000M Addressable Modular System Panel Owner’s Manual
The Addressable Modular System Panel 7000M is designed to satisfy a professional solution enhancing:
- Installation procedure with set-up flexibility
- 2-10 loop capability
- Supplied with 2 loops as standard
- Add up to 4 more loop module cards to increase panel capacity to a maximum of 10 loops
- Certified to EN54-2/4/13
Product is also available with a printer – Part Number: 7000M-P
Technical Features
| Number of Loop Addressable Devices per Loop | up to 210 pcs |
| Number of Loop Addressable Devices per Panel | up to 2,100 pcs |
| Number of Loop Modules per Panel | up to 5 (total 10 loops) |
| Number of Loop Modules per System | up to 64 |
| Number of BIO Modules | up to 5 per panel |
| Number of Addressable Devices per System | up to 13,440 p c s |
| Detection Zone | contain up to 32 loop detectors, fire inputs or/and manual call points |
| Detection Zones per Panel / System | up to 1,023 / 30 per loop |
| Configurable Week Schedule (Day / Night Mode) | sensitivity and logic change to detectors, delays change in alarm zones |
| Protection Zones per Panel / System | up to 1,023 / 30 per loop |
| Protection Zones peí Panel / System | up to 1,023 / 30 per loop |
| Protection Zones per Panel / System | redundant CAN network supports up to 16 panels and up to 13,440 detectors |
| Maximum Number of Addressable and Conventional Fire Alarm Devices | up to 35 per loop, up to 350 per panel connected to the loops – conventional and addressable devices (sounders) |
| Dependencies on more than one alarm signal | CI Mode B (detecting fire by two zones activation) CI Mode C (detecting fire with inspection time) |
| Alarm Counter | up to 9,999 (can be deleted by script at level access 4) |
| Event Log (archive) | 10,000 events |
|
Configurable Output to Fire Protection Equipment (addressable output device) |
LED indication for activation |
| input for the reception of a confirmatory signal from fire protection equipment, indicated by means of separate indicator | |
|
Other Features |
alarm zones and protection zones can be activated from any detection Zones (one detection zone cannot activate two alarm zones) |
| configurable sounder melodies in alarm and prealarm state (Warning-state) for every Alarm zone. | |
| output to fire alarm devices | |
| alarm confirmation input from fire alarm routing equipment | |
| fault monitoring fire protection equipment (in/out) | |
| delay to outputs, day / night mode | |
|
fault signals from points |
|
|
total loss of power supply |
|
|
output to fault warning routing equipment |
|
| disablement of addressable points |
1 Efr. Nikola Paskalev Str, Mladost 1
Sofia 1748, Bulgaria
Telephone: +359 2 97 439 2
Email: sales@unipos-bg.com
Website: www.unipos-bg.com
Documents / Resources
 |
UniPOS 7000M Addressable Modular System Panel [pdf] Owner's Manual 7000M, 7000M Addressable Modular System Panel, Addressable Modular System Panel, Modular System Panel, Panel |
