UTi165B Plus Thermal Imager Infrared Image Camera
“
Specifications
- Product Name: UTi165B+ Thermal Imager
- Model Number: P/N: 110401112863X
- Temperature Measurement Range: -20°C to 550°C
- Super Resolution: 320 x 240
- Equipped with T-Mix Dual-light Fusion
- Professional PC Analysis Software included
- Mobile App available for iOS & Android
- IP65 Rating
- Drop-Proof up to 2m
Product Overview
The UTi165B+ Handheld Thermal Imager offers a wide temperature
measurement range and multiple image modes for various imaging
needs. It comes with PC software and a mobile app for image
analysis and report generation, along with real-time image
transmission support.
Product Features
- Temperature Measurement Range: -20°C to 550°C
- Super Resolution: 320 x 240
- T-Mix Dual-light Fusion Technology
- Professional PC Analysis Software
- Mobile App for iOS & Android
- IP65 Rating for dust and water resistance
- Drop-Proof up to 2m
Product Usage Instructions
1. Powering On/Off
To power on/off the device, long press the POWER button.
2. Using LED Light
Press the LED light button to toggle the lighting lamp
on/off.
FAQ
Q: Can the UTi165B+ be used in extreme temperatures?
A: The UTi165B+ is designed to operate within a temperature
range of -20°C to 550°C to avoid damage.
Q: Is the UTi165B+ waterproof?
A: The UTi165B+ has an IP65 rating, making it dust-tight and
protected against water jets.
“`
**
P/N:110401112863X
UTi165B+
Thermal Imager Quick Start Guide
PREFACE
Thank you for purchasing the new UTi165B+ Thermal Imager. In order to use this product safely and correctly, please read this manual thoroughly, especially the Cautions part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
LIMITED WARRANTY AND LIABILITY
Uni-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not apply to damages caused by accident, negligence, misuse, modification, contamination and improper handling. The dealer shall not be entitled to give any other warranty on behalf of Uni-Trend. If you need warranty service within the warranty period, please contact your seller directly. This warranty is the only compensation you can obtain. Uni-Trend will not be responsible for any special, indirect, incidental or subsequent damage or loss caused by any reason or speculation. As some areas or countries do not allow limitations on implied warranties and incidental or subsequent damage, the above limitation of liability and stipulation may not apply to you.
12
UTi165B+
Cautions
1. Use or store the device in specified operating or storage temperature to avoid damage. 2. Do not aim the product at strong heat sources, such as sun, laser device, spot-welder,
etc. 3. Do not knock, toss, or shake the product and accessories. 4. Do not use dissolved or similar liquids on the product or cables. 5. Please follow the following instructions to wipe the device:
Non-optical surface: If necessary, use a clean and soft cloth to wipe the non-optical surface of the thermal imager. Optical surface: Do not stain the optical surface of lens when using the thermal imager. Especially not to touch lens with hands, cause it may erode the optical coating layer on the glass surface. When the optical surface is stained, wipe it carefully with a special lens paper. 6. Keep it stable when using the device. 7. Please do not disassemble the device to avoid product damage and loss of warranty rights. 8. Due to different batches, the materials and details of actual products may be slightly different from the graphic information. Please refer to the goods received. 9. The experimental data in the manual are theoretical values and all from Uni-Trend’s internal laboratories, for reference only. Customers cannot use them as basis for placing orders. If users have any questions, please contact customer service.
UTi165B+
Content
1. Product Overview ————————————————- 15 2. Product Features ————————————————— 15 3. Packing List ——————————————————— 15 4. Product Appearance ——————————————– 16 5. Display ————————————————————– 17 6. System Settings ————————————————— 18 7. Temperature Measurement Parameters——————— 19 8. Mobile APP ———————————————————– 20
13
14
UTi165B+
1. Product Overview
UTi165B+ Handheld Thermal Imager equips wide temperature measurement range and multiple image modes for different imaging requirements, PC software and mobile APP for images analysis and report generating, meanwhile, real-time image transmission is supported.
2. Product Features
Temperature Measurement Range: -20~550
Super Resolution: 320 x240 T-Mix Dual-light Fusion Equips Professional PC Analysis Software Equips Mobile App (iOS & Android) IP65 Rating 2m Drop-Proof
3. Packing List
Items Thermal Imager USB Cable Quick Start Guide Warranty Card
Quantity 1 1 1 1
15
UTi165B+
4. Product Appearance
Items 1 2 3 4 5 6 7 8
Description Type-C USB Interface Protective Cover Tripod Mounting Hole LED Light Infrared Camera Lens Visible-Light Camera Lens Trigger POWER
Items 9 10 11 12 13 14 15 16
Description Lighting Lamp button LEFT DOWN UP Gallery button RETURN RIGHT SET
4.1 Buttons
1. POWER button: Long press to power on/off. 2. LED light button: Press to be lighting lamp on/off. 3. SET button: Open Menu Bar/ Confirm the selection. 4. Navigation buttons(Left/Right/Up/Down): Control to move cursor, long press for
continuous move, short press for single move. 5. Gallery button: In the main interface, press to open Gallery. 6. RETURN button: Back to the previous interface. 7. Trigger: Press to capture image or take video in the main interface.
16
5. Display
UTi165B+
Items Description
Items Description
1 Center Spot Temperature
5 Range Bar
2 Auto MAX. Temperature Tracking 6 Battery Status
3 Center Spot
7 USB Icon
4 Menu Bar
8 Auto MIN. Temperature Tracking
5.1 Menu Bar 1. Temperature Mark: Center spot, Hi/Lo spot and its temperature display. 2. Color Palettes: 7-color, Ironbow, Rainbow, Lava, White Hot, Red Hot, Black Hot,
and Rainbow HC. 3. On screen analyzer: 5 points/3 rectangles can be added (up to 6 measurement
tools), Preset tools add/save, Clear All (Measurement tools). 4. Image Modes: Thermal Imaging, Visual Imaging, Fusion, PIP. 5. Settings: For system settings.
17
UTi165B+
6. System Settings
Camera Modes Super-resolution Units
Parameters
Alarm Languages Date & Time
Photo-Capture/Video-Record/Time-Lapse
Super-resolution ON/OFF.
Temperature units (/K/)/ Distance units (m/ft)
Emissivity (0.01~1.00), Ambient Temperature (-20~60), Reflected Temperature (-20~60), Humidity (0~100%RH), Distance Compensation (0.15~4.00m), Scale Switch (-20~150/0~550).
High/Low temperature alarm, LED alarm, Buzzer alarm ON/OFF.
Chinese/English
Hour/Date/Time
Wi-Fi
Wi-Fi ON/OFF, Wi-Fi ON can modify its name and password, connects mobile to use App.
USB Mode Brightness Auto Power Off Factory Reset Formatting About
USB Storage/USB Projection Adjustable (1~100%) Auto power off time can be set. Set to the factory default setting. Format the memory, clear the gallery. Check the device information.
18
UTi165B+
7. Temperature Measurement Parameters
Emissivity: The ratio of the measured object to the black body with the same temperature, which is an essential indicator to measure the radiant energy of the object. Its value ranges from 0.01 to 1.00.
Ambient Temperature: The ambient temperature at which the thermal camera and the measured object are located.
Reflected Temperature: The radiant energy influence from other heat sources surrounding the measured object.
Measurement Distance: The distance between the thermal camera and the measured object.
Relative Humidity: The percentage of water vapor content in the air during the transmission of radiant energy from the measured object.
Note: 1. The accurate setting of the above parameters has varying degrees of influence on
the final temperature measurement results. 2. Recommended Values: In case of uncertainty regarding these parameter values,
the following recommended values are generally suggested:
Emissivity Ambient Temp. Reflected Temp. Relative Humidity Distance
0.95 25 25 55%RH 0.25m
3. Accuracy± 2/±2% (whichever is greater, -10 550, Room temperature: 25)
19
UTi165B+
8. Mobile APP
Step 1 For iOS, search “Thermal Link” in APP Store or scan the following QR code to download. For Android, access UNI-T’s website or scan the following QR code to download “Thermal Link”.
iOS
Android
Step 2
Open Wi-Fi on the device. Search Wi-Fi name of “UTi165B+”on mobile phone. Enter 12345678 to connect Wi-Fi. Enter the App to get functions of real-time image transmission, remote viewing and images download, etc.
Note: Please keep the connection range within 10m and no obstacles to ensure the stable data transmission.
* The content of Quick Start Guide is subject to change without notice. *
20
Documents / Resources
 |
UNI-T UTi165B Plus Thermal Imager Infrared Image Camera [pdf] User Guide UTi165B Plus Thermal Imager Infrared Image Camera, UTi165B Plus, Thermal Imager Infrared Image Camera, Imager Infrared Image Camera, Infrared Image Camera, Image Camera |