UNI-T 315A Handheld Vibration Testers
System Requirements
- Pentium 1 Gigahertz (GHz) processor or faster
- At least 1GB of RAM
- At least 2GB of available space on the hard disk
- USB 2.0/3.0
software only supports the following operating systems
- Microsoft Windows Vista
- Microsoft Windows 7
- Microsoft Windows 8
- Microsoft Windows 10
If your Windows does not contain the corresponding service pack version, please perform a Windows update first.
Installing the Software
- Insert the installation CD-ROM into your computer
- The menu will be opened automatically (if installation doesn’t start immediately, double-click Setup.exe in your CD-ROM directory).
Using the Software
Interface and basic functions
| Area | Description |
| 1 | Menu and toolbar |
| 2 | Shows the live-data from the DMM |
| 3 | Data items，contain live-data and store-data |
| 4 | Data details, contain a table and a chart |
Get live-data
Make sure the meter and computer are connected via a USB cable
- Click the
and the software will attempt to connect to the meter - Click the
and the software will get data from the meter - Live-data will be displayed in area 2
- Data details will be saved in the form of tables and charts.
Get Store-Data
- The stored-data will be saved in the “Store Data” item.
Export
- Click the
- Select the export project as needed. If you export to PDF, you can select a scene picture.
- Input file name
Setup software
Click 
to open options dialog
- “Sample Points”：Set the number of sampling points. If “Infinite” is checked, the number is unlimited
- “Sample rate”: Set the sampling rate. If the set rate is greater than the actual rate, the actual rate will prevail; if set to 0, the actual rate will be sampled
- “Skip repeat reading”: If checked, the same sample value as the previous one is not recorded
Item operation
Live-data
| Name | Description |
| Set to active | Set the selected item to be activated, and the received data will be saved to this item. |
| Rename | Rename the selected item |
| New | Create a new item and set it to active |
| Delete | Delete the selected item |
Store-data
| Name | Description |
| Set to active | Set the selected item to be activated |
| Download | Download store data |
Get help
Click 
to open the “Software user manual”
Documents / Resources
 |
UNI-T 315A Handheld Vibration Testers [pdf] User Manual 315A, Handheld Vibration Testers, 315A Handheld Vibration Testers, Vibration Testers, Testers |
