Ultralux 500W Deviator Proximity Sensor Instructions
TWO-WAY PROXIMITY SENSOR – MODEL: SB2
INSTRUCTIONS FOR EXPLOITATION
The product is an infrared sensor with a small detection range. The sensor turns ON/OFF when moving objects enter the detection range.
TECHNICAL SPECIFICATIONS
INSTALLATION
- Switch off the main power supply.
- Fix the product on a suitable place.
- Connect the power and the load to the sensor, following the connection-wire diagram.
- Switch on the main power supply and test the sensor.
TEST
- Switch on the main power supply.
- The light will turn on when a moving object enters the detection range. The light will turn off when a moving object is detected again.
NOTE: Please, do not block the sensor window with objects, as it may affect the proper work ofthe sensor.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
The product and its components are not harmful to the environment
Please dispose the package elements separately in containers for the corresponding material.
Please dispose the broken product separately in containers for out of usage electrical equipment.
CONNECTION-WIRE DIAGRAM
Read More About This Manual & Download PDF:
Documents / Resources
 |
Ultralux 500W Deviator Proximity Sensor [pdf] Instructions 500W, 200W, 500W Deviator Proximity Sensor, 500W, Deviator Proximity Sensor, Proximity Sensor, Sensor |