UGREEN CM430 DP Dual Switcher
Preface
Thank you for purchasing UGREEN products. For optimum operation, please read this manual carefully before using.
Package Contents
Product Overview
- DP IN 1/2
- Switch Button
- Signal Indicator
- DP OUT
- USB-C DC5V
2-In 1-Out Mode
- In 2-in 1-out mode, “DP IN 1/2” is connected to the signal source; “DP OUT” is connected to the display device.
- Short pressing the switch button to choose signal 1 or 2 to show on the display device, and then indicator 1 or 2 glows blue.
1-In 2-Out Mode
Note:
Images of Device 1 and Device 2 can’t be shown simultaneously in 1-in 2-out mode.
- In 1-in 2-out mode, “DP IN 1/2” is connected to the display device ; “DP OUT” is connected to the signal source.
- Short pressing the switch button to choose monitor 1 or 2 to display content of the signal source, and then indicator 1 or 2 glows blue.
Resolutions and DP Cable
When the total cable length exceeds 5 m (16.4 ft), you’ll need a DP fiber-optic cable to achieve 4K@60Hz.
Notes
- Please power off the product if it is not used for a long time.
- Voltage of the power adapter must be within the standard voltage (DC 5V ₫ 5%).
- Please contact UGREEN after-sales service if you need to disassemble the product.
- Do not leave the product in high-temperature or moist environments.
- Do not drop, hit, crush or throw the product in case of circuit damage.
- Please deal with the product based on your local laws instead of classifying it as household waste.
- Keep out of reach of children.
Specification
Scan me
Documents / Resources
 |
UGREEN CM430 DP Dual Switcher [pdf] User Manual CM430, CM430 DP Dual Switcher, DP Dual Switcher, Dual Switcher, Switcher, 60622 |
