ZED-F9K Multi Band GNSS Module
Information note
Topic ……………………..ZED-F9K-02A reaches initial production status
UBXDOC-963802114-12596 C1-Public
Author……………………Martin Wallebohr
Date…………………….15 April 2025
Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox. The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time. For most recent documents, visit www.u-blox.com.
Copyright© u-blox AG.
Affected products
| Product name | Ordering code | Firmware |
| ZED-F9K | ZED-F9K-02A | LAP 1.50 |
Type
☒ Product status change
☐ Hardware/component change
☐ Firmware/software update
☐ Label change
☒ Documentation update
☐ Certification information
☐ Security advisory
☐ Other
Description
The automotive grade ZED-F9K-02A multi-band GNSS module with high precision and dead reckoning has reached initial production status. Compared to the previous version ZED-F9K01A, there is no hardware change. The firmware has been updated from LAP 1.30 to LAP 1.50.
For information on the firmware changes, see the Release note [2].
Customer impact and recommended action
Please see the list of relevant documents listed below for details.
- EVK-F9DR User guide, UBX-23007618
- LAP 1.50 firmware Release note, UBXDOC-963802114-13007
- ZED-F9K-02A Data sheet, UBXDOC-304424225-18291
UBXDOC-963802114-12596
C1-Public
ZED-F9K-02A reaches initial production status
Documents / Resources
 |
u blox ZED-F9K Multi Band GNSS Module [pdf] Instructions ZED-F9K-02A, ZED-F9K Multi Band GNSS Module, ZED-F9K, Multi Band GNSS Module, GNSS Module, Module |