TYTE D1 WiFi Smart Temperature Switch
Caution:
Do not touch the sensor socket. For safety, please connect the sensor before powering it on.
Parameters
- Input voltage: AC 85V~250V
- Max.Current: 16A
- Wi-Fi Standard: Wi-Fi 2.4Ghz b/g/n+Bluetooth
- Temperature display accuracy: 0.1°C
- Working temperature: -20°C~70°C
- Size: 96*53*31mm
Checklist before using the device
- Your smartphone or tablet is connected to a 2.4g WiFi with internet.
- You need to enable Bluetooth on the phone.
- You have the correct WiFi PWD.
- Your smartphone or tablet must have access to the APP store, and Google Play.
- Your router is MAC-open.
User Guide
- You can download the App by searching “Tuya Smart” in mobile app stores or scanning the following QR code
- Register a Tuya Smart account.
- If you have a Tuya Smart account. just login
Add devices
- Reset the device first: if the network indicator blinking fast (0.55/time), skip the reset step.
- Power on
- Hold down the Reset button for 6 seconds.until network indicator blinking fast(0.5s/time).
- Clicking + in the top right corner on the Tuya Smart app. then click “Auto Scan”, and wait a few seconds, After the devices are found, Click “Next”
- Select a 2.4GHz Wi-Fi network and enter your password
- Name your device.
- When the network is disconnected, the switch will automatically switch to the Bluetooth control of the phone.
- Click the on/off buttons on the APP can control the device, The Manual control switch also can be displayed in real-time oh the APP.
APP Function
TROUBLESHOOTING
Enter the homepage of the App, and click the icon in the lower right corner of the interface to enter.
Documents / Resources
 |
TYTE D1 WiFi Smart Temperature Switch [pdf] User Manual D1 WiFi Smart Temperature Switch, D1, WiFi Smart Temperature Switch, Smart Temperature Switch, Temperature Switch, Switch |
