tukzer logo

SOURCE SCREEN
HANGING LAMP

tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor
User Manual
TZ-ML-02
Please read this manual carefully before using the product and keep it properly.

Product Introduction

The screen bar of hanging light adapts long design with wide luminous effect, three color temperature can be switched, the brightness is adjustable. There is no video flash, it will provide clear and comfortable lighting ,it can be timed.

Product Features

  1. Contracted The Lamp Body
  2. Does Not Occupy A Space
  3. A Second Fixed
  4. No Stroboflash
  5. Stepless Dimming
  6. Three Color Temperature Adjustment
  7. USB Power Supply

Product Parameters

Product Model No. : TZ-ML-O2
Product Material ; ABS
Product Color : Black/ White
Rated Voltage : SV=
Product Power : 5W (78X0.2W/LED Module )
Rated Current: 1A =
Light Source : LED
Color Rendering Index (Ra) : >80
Working Temperature : -5~+45
Color Temperature : 3000K-4000K-6000K(Three colors temperature adjustment)
Luminous Flux : >90LM
Product Weight : #413¢
Product Size : 500°65*104MM
Packing Size : 535*95*120 MM

Product Parts List

LED Desk Lamp “1
User Manual *

Product Part Name

tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig

Product Instructions

  1. Connect the USB cable to your computer/ adapter and connect the product to the other end
  2. Press tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig 1switch button for 1 second to turn on the bright white light, press second
    time to switch to yellow light, press third time to switch to warm light ,press fourth time to turn off the light, by doing long press tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig2this button under any light color mode to adjust the brightness. When the light is on, press and
    the light will be off automatically after 60 minutes, reminding you to sleeping time. Press fast mode buttontukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig3 to set the highest brightness level of the light.
  3.  When the computer display screen is thinner or difficult to fix, you can use the own sucker to reinforce. The operation method is as the following sketch.tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig4
    tukzer TZ ML 02 Monitor Screen Light Bar with Smart Touch Sensor - fig5

Notes

Warning:

  1. The product is not waterproof, Please do not use it in a wet environment.
  2. Please do not disassemble the product by yourself.
  3. To avoid danger, do not cover the product.
  4. Keep children away from the lamp, this product is not meant for children Cut off the power supply quickly in case of abnormal phenomenon ,and contact with the seller.

Note:

  1. The light source of the secondary lamp is not replaceable. When the light source reaches the end of its life, the whole lamp should be replaced.
  2. SELV LED with CCC certification is powered by AC electronic control device.

Documents / Resources

tukzer TZ-ML-02 Monitor Screen Light Bar with Smart Touch Sensor [pdf] User Manual
TZ-ML-02 Monitor Screen Light Bar with Smart Touch Sensor, TZ-ML-02, Monitor Screen Light Bar with Smart Touch Sensor, Light Bar with Smart Touch Sensor, Smart Touch Sensor, Touch Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *