A3 WISP settings
It is suitable for: A3
Diagram
Preparation
● Before configuration, make sure that both A Router and B Router are powered on.
● make sure you know the SSID and password for A router
● Connect your computer to the same network of router A and B.
● Set both Router A and B should to the same band 2.4G or 5G.
Feature
1. B router can use PPPOE, static IP. DHCP function.
2. WISP can build its own base stations in public places such as airports, hotels, cafes, teahouses and other places, providing wireless Internet access services.
Set up steps
STEP-1: B-router wireless setting
You need to enter the settings page of the router B, then follow the steps illustrated.
① In the navigation bar, select Basic Setup-> ② Wireless Setup-> ③ Select 2.4GHz Basic network
④ Setting Network SSID, channel, Auth, password
⑤ Click the Apply button
Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration
STEP-2: B-Router WISP setting
Enter the settings page of the router B,then follow the steps illustrated.
① In the navigation bar,select Advanced Setup-> ② Wireless-> ③ Wireless Multibridge
④ For Wireless Multibrige,select 2.4GHz, if you want to use 5GHz for WISP,choose 5GHz.
⑤ In Mode list, select Wireless Wan.
⑥ Click the Ap Scan button
⑦ Click AP you need repeater,check SSID
⑧ Enter the password for router A (You can check the box next to check the password you entered)
⑨ Click the Apply button,Wait for the configuration to finish.
STEP-3: Check whether the B route IP address conflicts with route A.（Option）
If there is a conflict between the LAN IP addresses of the two routes, you need to check the Change LAN IP address automatically. Then click the Apply button and the router restarts. We can obtain the new IP address and login B route setting with the new IP address page.
STEP-4: B Router position display
Move the Router B to a different location for a best Wi-Fi access.
DOWNLOAD
A3 WISP settings – [Download PDF]
