The Home Depot Framed LED Mirror With Front And Backlit
Package contents
You may need these tools
PS: The location of the button is located the power box.
Meaning of LED Lights
| State of LED Light | Meaning |
| White Light ONFunction | n is Working |
| Blue Light ON | Function Standby |
| Light OFF | Power OFF |
Before Installation
Thank you so much for choosing our mirrors. To facilitate the use of our products, please read these instructions carefully before installation.
Please Notice
- Please read all instructions carefully before assembling the item.
- After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
- Please power the Mirroir R with a plug to test all its functions before installing it on the wall.
- Assembly by two or more adults is highly recommended.
- Disconnect power before installing, adding, or changing components.
- Ensure that the fixing location can take the weight of the complete ftting.
- Keep the voltage at 1at 10V. If the voltage exceeds 1the 10V, please use a transformer.
- To connect the wire electrical junction box, a qualified technician or electrician is highly recommended.
DANGER – To reduce the risk of electric shock:
- Always disconnect this furnishing from the supply main before cleaning or servicing.
Product Description
Before installation, please check to make sure these functions work properly:
Anti-fog switch: After connecting the power, the anti-fog function is already turned on automatically.- If you don’t need to use it, just touch it to turn it off to prevent wasting energy. The defogging will take effect within 10 minutes after it’s turned on and will close in 1 hour, so you can turn it on 10 minutes before taking a bath.
The button for the front light: Short-press (the middle button) to dim the brightness of the front light. Long-press to change the color temperature(warm white 3000K, neutral lights 4000K, white lights 6000K).- The button for backlit: Short press (the outermost button) to dim the brightness of the back light. Long-press to change the color temperature (warm white 3000K, neutral lights 4000K, white lights 6000K).
Product Information
| Anti-fog | Yes |
| Memory | Yes |
| Certificate | ETL |
| Light Source | LED |
| Cable Length | 1.5M |
| Material | Tempered Glass |
| Input Voltage | 110V~; 50/60Hz |
| Warranty | 3-year manufacturer |
Specifications and Parameters
Installation Instruction
Method 1: Plug in
Insert the plug into the socket, and keep the voltage between 110V and 120V. If the voltage exceeds 120V, please use a transformer.
Method 2: Hardwire
Cut the plug, connect the same color wire, and tighten them (Disconnect power before hardwiring.
Assembly
Troubleshooting
|
LED doesn’t turn on / Defogging doesn’t work |
Open the power box on the back of the mirror and test the power cables; tighten the cables if they are loose.
( Please cut off the power first before testing the power supply and cables.) |
|
Part of the light strip is faulty.y |
Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, you need to replace the strip light. |
|
After using it for a few months, the light doesn’t work. |
Please contact us to replace the power supply. |
Manufacturer: Zhongshan Chengjiang Glass Technology Co., Ltd.
Address: Jichang Village, Dongfeng Town, Zhongshan
Cit Guangdong Province, China
Contact us: service@apmir.shop
Documents / Resources
 |
The Home Depot Framed Led Mirror With Front And Backlit [pdf] User Manual Framed Led Mirror With Front And Backlit, Mirror With Front And Backlit, With Front And Backlit, Front And Backlit, And Backlit |