Select Series
LED Area Light
Product Specifications
Select Series LED Area Light
TCP’s Select Series LED Area Light features a modern, lightweight design with tool-less driver compartment clips resulting in an easier and faster installation. The durable, 3G tested, luminaire construction provides bright, uniform light while maintaining a zero uplight BUG rating, allowing for Dark Sky Conformance. An energy efficacy of up to 165 LPW combined with a 50,000 hour rated life significantly decreases energy, maintenance, labor and material costs over the life of the fixture – perfect for utility rebate programs.
Reasons to choose the Select Series LED Area Light from TCP
- Uses up to 80% less energy than traditional HID
- Long 50,000 hour rated life minimizes replacement and labor costs
- Factory installed 7-pin NEMA photocontrol receptacle with shorting cap included
- Easy-to-install mounting accessories available for various mounting options
- Mercury-free construction is great for all environments
- IP65 Rated – suitable for outdoor installation
- Lightweight and low Effective Projected Area (EPA) reduces stress on existing poles
- Dark Sky Conformance: Full cutoff fixture results in zero uplight emission
- Tool-free access to electrical compartment for easy field maintenance
Ideal Applications
- HID Shoebox Replacements
- Shopping Malls
- Parking Lots and Parking Garage Top Level
- Walkways
- Stadium Lots
- Dark Sky Applications
- Campuses
- Auto Dealerships
Specifications
| Input Line Voltage | 120-277 |
| Input Line Frequency (Hz) | 50/60HZ |
| Lumens: | |
| SW2 | 17,000/25,500/34,000L |
| SW4 | 34,000/41,000/51,000L |
| Wattge: | |
| SW2 | 100/150/200W |
| SW4 | 200/240/300W |
| Lumens per Watt (LPW) | 170 LPW |
| Color Temperature (CCT) | Selectable 3000K/4000K/5000K |
| Rated Life | 50,000 hours |
| Controls | NEMA 3-pin & 7-pin Photocontrol Receptacle options available |
| Operating Temperature | –40°C to 50°C |
| CRI | 80 |
| Power Factor | >0.9 |
| Surge Protection | 10KV (120-277V), 20KV (277-480V) |
| THD | <20% |
| Ratings | UL/cUL, IP65 Wet Location rated |
Warranty
Five year limited warranty against defects in manufacturing
Replacement Strategy
| TYPE | WATTAGE* | ENERGY SAVINGS (%) |
| TCP Area Light SW2 – 17,000 Lumens | 100W | — |
| 250W Metal Halide 400W Metal Halide | 250W 400W |
60% 75% |
| TCP Area Light SW2 – 22,500 Lumens | 150W | — |
| 250W Metal Halide 400W Metal Halide | 250W 400W |
40% 63% |
| TCP Area Light SW2/SW4 – 34,000 Lumens | 200W | — |
| 400W Metal Halide 1000W Metal Halide | 400W 1000W |
50% 80% |
| TCP Area Light SW4 – 41,000 Lumens | 240W | — |
| 400W Metal Halide 1000W Metal Halide | 400W 1000W |
40% 76% |
| TCP Area Light SW4 – 51,000 Lumens | 300W | — |
| 400W Metal Halide 1000W Metal Halide | 400W 1000W |
25% 70% |
Actual wattage may differ by +/- 5%, when operating between 120-277V +/- 10%.
NOTE: Charts show system lumens (delivered lumens), NOT straight lamp lumen output. This is calculated as follows:
*System lumens = mean lumens x # lamps x ballast factor x luminaire efficiency factor
Applications
TCP’s Select Series LED Area Lights feature a low profile, 3G vibration rated design that delivers a bright, uniform light while saving energy over traditional HID sources. Maintenance costs are virtually eliminated over their long-rated life. Applications include parking lots, walkways, auto dealerships, campuses and other public areas.
Construction
- Visually appealing slim, low-profile design
- Flat top design promotes self cleaning during rain events
- Heavy duty die-cast aluminum housing
- Durable UV stabilized powder coat finish
- Many optional mounting accessories available (see page 6)
Electrical
- Accepts 120-277V or 277-480V
- NEMA 7-pin photocontrol receptacle with shorting cap included
- System rated for long 50,000 hour rated life
- cULus wet location rated
- 10KV (120-277V) and 20KV (277-480V), surge suppression comes standard
Optics
- Durable acrylic optics resist yellowing
- Distribution Type III standard, Types IV and V optional
- Optics can be rotated to satisfy complex applications. See next page for more details
Listings
cULus Listed – wet location rated
RoHS Compliant
IP65 Rated 3G Vibration Rated
Installation
Surface or pole mounted Before installation, please consult your local ordinances and building codes for compliance
Warranty
Five year, 50,000 hour limited warranty against defects in manufacturing*
*10 year limited warranty available for an additional fee
| Catalog Ordering Matrix | |||||||
| FAMILY | VOLTAGE | DIMMING | LUMENS PACKAGE1 (WATTAGE)2 | DISTRIBUTION | COLOR TEMPERATURE | COLOR3 | CONTROL OPTION |
| SELECTABLE WATTAGE WITH SELECTABLE COLOR | |||||||
| SAL – Selectable Area Light | U – 120-277V | ZD – 0-10V Dimming | SW2 – 17,000/25,500/34,000L (100/150/200W) SW4 – 34,000/41,000/51,000L (200/240/300W) |
T2 – Type 2 Distribution T3 – Type 3 Distribution T4 – Type 4 Distribution T5 – Type 5 Distribution | CCT – 3000/4000/5000K
Selectable |
Blank – Bronze WH – White BK – Black | Blank – No Added Control MS – PIR/Daylight Sensor |
| SINGLE WATTAGE WITH SELECTABLE COLOR | |||||||
| SAL – Selectable Area Light | U – 120-277V | ZD – 0-10V Dimming |
100 – 100W (17,000L) |
T2 – Type 2 Distribution T3 – Type 3 Distribution T4 – Type 4 Distribution T5 – Type 5 Distribution | CCT – 3000/4000/5000K Selectable | Blank – Bronze WH – White BK – Black | Blank – No Added Control MS – PIR/Daylight Sensor P3 – 3 Pin Photocontrol P7 – 7 Pin Photocontrol |
Approximate lumen output. Actual performance may vary based on CCT, options selected and end user application.
Actual wattage may differ by +/-10%.
Bronze is the standard color, other colors are special order only. Extended lead times apply.
Field Installed Accessories
| 4INPOLEREDUCER | 4” Pole Reducer |
| 5INPOLEREDUCER | 5” Pole Reducer |
| SALSHIELD1 | Backlight Shield for SW2 lumen packages |
| SALSHIELD2 | Backlight Shield for SW4 lumen packages |
| PC3UNDBU | 3 Pin ON/OFF only photocontrol for use with 120-277V applications |
| PC7UDIMBU | 7 Pin ON/OFF + daylight harvest photocontrol for use with 120-277V applications |
| PC3HNDBU | 3 Pin ON/OFF only photocontrol for use with 347-480V applications |
| PC7HDIMBU | 7 Pin ON/OFF + daylight harvest photocontrol for use with 347-480V applications |
Area Light with Backlight Shield installed
Tool-less Maintenance
The Area Light features clips on the rear of the fixture to close the electrical compartment. These clips open and close without the need for tools, making maintenance and repairs in the field simple.
Internal wattage and color temp switch.
Dark Sky Conformance
The Area Light emits zero light above 90° and allows for conformance to the International Dark Sky Association’s fully shielded light source requirement.
This does not include incidental light reflections.
Mounting Accessories
SALSLIPFITTER
This cast aluminum slipfitter mount secures the luminaire to horizontal arm or vertical tenon. This mount can also be applied directly to the wall.
SALTRUNNION
This trunnion mount accessory allows for wall mounting with a flexible angle adjustment.
SALRSPOLEADAPTER
This round or square pole mount kit is designed to mount to the side of a round or square pole. This can be used with 4” or 5” square or round poles.
Dimensions
Mounting Diagrams
Photometric Report
Photometric data taken from SALUZDSW4T3CC
Polar Graph
Maximum Candela = 23293 Located At Horizontal Angle = 45, Vertical Angle = 59
# 1 – Vertical Plane Through Horizontal Angles (45 – 225) (Through Max. Cd.)
# 2 – Horizontal Cone Through Vertical Angle (59) (Through Max. Cd.)
Characteristics
| IES Classification | Type III |
| Longitudinal Classification | Short |
| Lumens Per Lamp | 44033 (1 lamp) |
| Total Lamp Lumens | 44033 |
| Luminaire Lumens | 43723 |
| Downward Total Efficiency | 99% |
| Total Luminaire Efficiency | 99% |
| Luminaire Efficacy Rating (LER) | 155 |
| Total Luminaire Watts | 281.687 |
| Ballast Factor | 1 |
| Upward Waste Light Ratio | 0 |
| Maximum Candela | 23293 |
| Maximum Candela Angle | 45H 59V |
| Maximum Candela (<90ª Vertical) | 23293 |
| Maximum Candela Angle (<90ª Vertical) | 45H 59V |
| Maximum Candela at 90ª Vertical | 0 (0.0% Lamp Lumens) |
| Maximum Candela from 80ª to 90ª Vertical | 1917.6 (4.4% Lamp Lumens) |
| Cutoff Classification (deprecated) | Full Cutoff |
Coefficients of Utilization
FLUX DISTRIBUTION
| Lumens | Percent of Lamp | |
| Downward Street Side | 35334.3 | 80.2 |
| Downward House Side | 8388.9 | 19.1 |
| Downward Total | 43723.2 | 99.3 |
| Upward Street Side | 0 | 0 |
| Upward House Side | 0 | 0 |
| Upward Total | 0 | 0 |
| Total Flux | 43723.2 | 99.3 |
Luminaire Classification System (LCS)
| Lumens | % Lamp | % Luminaire | |
| FL – Front-Low (0-30) | 5432.1 | 12.3 | 12.4 |
| FM – Front-Medium (30-60) | 20539.3 | 46.6 | 47.0 |
| FH Front-Height (60-80) | 9162.4 | 20.8 | 21.0 |
| FVH Front-Very High (80-90) | 200.5 | 0.5 | 0.5 |
| BL – Back-Low (0-30) | 2121.0 | 4.8 | 4.9 |
| BM – Back-Medium (30-60) | 4232.3 | 9.6 | 9.7 |
| BH – Back-High (60-80) | 1914.8 | 4.3 | 4.4 |
| BVH – Back-Very High (80-90) | 120.8 | 0.3 | 0.3 |
| UL – Uplight-Low (90-100) | 0.0 | 0.0 | 0.0 |
| UL – Uplight-High (100-180) | 0.0 | 0.0 | 0.0 |
| Total | 43723.2 | 99.2 | 100.00 |
| BUG Rating | B3-U0-G4 |
ECHNOLOGY CAST IN A BEAUTIFUL LIGHT
For over 30 years, TCP has been designing, developing and delivering energy-efficient lighting into the market. Thanks to our cutting-edge technology and manufacturing expertise, we have shipped billions of high-quality lighting products. With TCP, you can count on a lighting product that is designed to meet the needs of the market, that transforms your surroundings and envelopes you in warmth. Lighting that generates beauty with every flip of the switch.
TCP®
325 Campus Dr. | Aurora, Ohio 44202 | P: 800-324-1496 | tcpi.com
©TCP SEP 2024/WF515850
Documents / Resources
 |
TCP Select Series LED Area Light [pdf] Owner's Manual Select Series LED Area Light, Select Series, LED Area Light, Area Light |